Categories

Best Fume Extractor

Valtcan Fume Extractor Soldering Fan Smoke Absorber

  • Powerful Fume extractor removes Smoke fume, soldering fumes, flux smoke, odor from soldering stations, workstations, nails, glasswork, pyrography, paint etc quick, safely and efficiently..
  • Solder Flux fume extractor fan 496 model equivalent to the 493 plus extra filters. Comes with 3 Active carbon filters, Easily replaceable by swamping out old for new one in the filter slot. Pull filter guard out to remove filter and replace with new one. Then push back filter guard to hold filter in place..
  • Adjustable tilt for optimum solder smoke absorption angle from your workbench. Twist knobs at two ends to loosen and then adjust tilt of smoke absorber. Fasten knobs to secure fan front when desired tilt is obtained..
  • Made of ESD safe material, lightweight and durable material. Low noise and high- efficient fan operates at acceptable db levels in solder workstations..
  • On/off button located in back of smoke absorber fan. Plugs into AC socket for power. Comes in 493 model box with extra filters..
Check Stock

KOTTO Strong Suction Hose Fume Smoke Absorber for Soldering Electric Iron Welding 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter,2 Pack Set Replacement HEPA Filter

  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction..
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs..
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W,....
  • Replacement HEPA Filter for Solder Smoke Absorber..
  • Replacement HEPA Filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room..
Check Stock

KOTTO Strong Suction Hose Fume Smoke Absorber for Soldering, Electric Iron Welding, 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter [Updated, Hose pre-attached]

  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction..
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs..
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O..
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply)..
  • US-based customer support, 30 days full satisfaction no question asked return period..
Check Stock

Aoyue 388 CircuitVise - PCB Holder & Helping Hands with Fume Extractor Mount

  • INTEGRATED FUME EXTRACTOR MOUNT & TOOL HOLDER - The only working platform with a built-in molded slot to accommodate the Aoyue 486 or 486+ fume extractor you may already own! Save space and solder safely!.
  • NON-REBOUNDING GOOSENECK ARMS - Precision helping hands are super flexible yet will NOT drift from desired position. Platform is 8" x 8.75".
  • STACKABLE MAGNETIC PCB HOLDERS - Powerful rare-earth magnet pillars can be positioned and stacked anywhere on platform to create an extremely versatile vise for circuit boards of any size. Use with arms for the most stable soldering experience possible..
  • HEAVYWEIGHT STABILITY - Arms are secured to the base using a heavy duty lock washer and screw that can withstand large circuit boards without falling over..
  • EXPANDABLE DIY SYSTEM - Unique construction allows for creative expansion by adding more arms, magnetic holders, and connecting multiple platforms together to handle the most demanding soldering scenarios..
Check Stock

Aoyue 388 CircuitVise Versatile Soldering Platform with Smoke Absorber Mount - 2 Pack

  • Integrated Fume Extractor Mount & Tool Holder - The only working platform with a built-in molded slot to accommodate the Aoyue 486 or 486+ fume extractor you may already own! Save space and solder safely!.
  • Non-Rebounding Gooseneck Arms - Precision helping hands are super flexible yet will NOT drift from desired position. Each Platform is 8" x 8.75".
  • Stackable Magnetic PCB Holders - Powerful rare-earth magnet pillars can be positioned and stacked anywhere on platform to create an extremely versatile vise for circuit boards of any size. Use with arms for the most stable soldering experience possible..
  • Heavyweight Stability - Arms are secured to the base using a heavy duty lock washer and screw that can withstand large circuit boards without falling over..
  • Expandable DIY System - Unique construction allows for creative expansion by adding more arms, magnetic holders, and connecting multiple platforms together to handle the most demanding soldering scenarios..
Check Stock

Solder Smoke Absorber Fan and Lamps with Helping Hands, NOEVSBIG Soldering Working Fan with 3pcs Filter,3 Color Modes Stepless Dimmable Soldering Lamp for Repair, Reading, Welding (Brown)

  • 【3 IN 1 Soldering Lamp】: Fume Extractor Fan and lamps can work alone, and also work together. When the smoke-absorbed fan working, its 3 colors and 10 brightness Levels lamps and helping arms can help you work in various light conditions and protect the eyes..
  • 【Soldering Helping Hands Function】: with 2 soldering arms can help to hold PCB board or solder wire when doing a welding job. The position of the arm can be moved for easy use. Ideal tool when third hand is required, useful auxiliary tool in soldering and modeling field..
  • 【High Efficient Fume Extractor Design Help to Remove Soldering Fumes】: Soldering activities produce fumes that are dangerous. They can cause serious long-term health problems if inhaled for long. If you love soldering and can't just stop, then this solder fume fan can help to far the fumes away while soldering..
  • 【Good Stability but Great Flexibility】: The clamp design saves your desk space,180°/135° can be adjusted. The lamp head can be adjusted 220 ° up and down, and 360 ° high flexibility swivel. The whole lamp can be rotated 360°on the base, providing you with greater flexibility. After locking knobs, can fix the lamp without swinging left and right, not falling or shaking..
Check Stock

6 Inch Exhaust Fan, HG POWER 308CFM Powerful Kitchen Extractor Fan, Stainless Steel Industrial Vent Blower for Outrdoor Indoor Heating Cooling Ventilation - 7.5\x7.5\ Panel

  • KITCHEN FUME BLOWER: With 308CFM strong airflow and 2800r/min high-speed rate, HG POWER 6-inch kitchen exhaust fan is super suitable for exhausting the fume in cooking, prevent your lung from damaged..
  • PREMIUM MATERIAL: The 6" bathroom extractor fan body is made of high-quality stainless steel, with soft plastic edge protection, which is rust-resistant and protects your hands..
  • THICKENED BLADES: The one-piece metal 7 fan blades make the fan air supply more evenly, reduce the noise, and the air volume is larger and gentle..
  • PURE COPPER MOTOR: Adopted pure-copper motor, the vent fan is high-performance and energy-saving, perfect for exhaust smoke, fume, odor in bathrooms, offices, kitchens, and more places..
  • WHAT YOU GET: HG POWER 12-month warranty and 24-hour customer service. If you have any questions, feel free to contact us. We will reply to you as soon as possible..
Check Stock

JFC Nori Fumi Furikake Rice Seasoning 1.7-Ounce Jars Pack of 4

  • Technical Parameter: Voltage: 110V, Efficiency: 99.97%, Power: 80W, Air Volume: 180m³/H, Noise: 58 dBA, Product Size: 37 x 25 x 40 cm/14.56 x 9.8 x....
  • Multi-layer Efficient Filtration: The selected high-quality deodorizing carbons have a better deodorizing effect on the laser-processed plastic....
  • 58 DBA Low Noise: The pure air fume extractor has a built-in noise reduction module with the 58 dBA the lowest volume, which avoids the noise during....
  • User-friendly Detail Design: The well-designed tight buckles distributed on both sides of the smoke air purifier, no smoke & reliable air tightness.....
  • Easy to Install & Disassemble: The cover of the air extractor adopts the detachable design for easy assembly. The instant disassembly and assembly....
Check Stock

RIDGID 97457 VF6000 5-Layer HEPA Replacement Filter for 5-20 Gallon Wet/Dry Vacuums

  • The product is 97457 FILTER, HEPA VF6000.
  • The product use for fume and smoke extractor filters.
Check Stock

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station

  • Solder Fume Extractor/Smoke Trap/Smoke Eater/Smoke Filter/Solder Sucker Prevention Absorber DIY Working Extractor Fan for Solder Station..
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room..
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily..
  • Easy to replace filter, Includes one smoke trap replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V, 30W (50 / 60Hz)..
  • US based customer support, 30 days full satisfaction no question asked return period..
Check Stock

SXDOOL Solder Smoker Absorber Remover Fan with Speed Controller,Fume Extractor Smoke Prevention,120mm 120V Cooler Adjustable

  • High airflow cooling fans designed for Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber.
  • Features a fan speed controller so you can optimize the airflow and noise for your application..
  • Dual ball bearing design allows the fan continuous operation 24/7 without too much of dust and high temperature concern and have a lifespan of 50,000....
  • Comes with 3pcs 120mmX120mmX3mm Active carbon filters,easy to replace. The filter is made of special foam with refined activated carbon, which has....
  • Great for mobile phone maintenance, great for soldering station work,electronics, arts and crafts, stained glass work, ..
Check Stock

Solder Smoker Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Soldering with spare Carbon filter

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station..
  • It adopt the high performance fan with low noise, and the suction is strongThe structure is simple. The replacement of the activated carbon filter....
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. Long-lasting working time for over 50,000 hours..
  • Comes with 5 Active carbon filters. The filter is made of special foam with refined activated carbon, which has high suction and flux absorption....
  • It's a good helper for mobile phone maintenance, great for electronics, arts and crafts, stained glass work, soldering station work..
Check Stock

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station with 5 Pack Carbon Filter

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room..
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to....
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V, 30W (50 / 60Hz)..
  • US based customer support, 30 days full satisfaction no question asked return period..
Check Stock