Categories

Best Fume Hose

Flexadux T-7 Thermoplastic Rubber Duct Hose, Black, 4\ ID, 0.030\ Wall, 25' Length

  • Duct hose for industrial ventilation, dust removal, and paint spray extraction.
  • Medium weight black thermoplastic rubber, reinforced with a spring steel wire helix, is resistant to chemicals, moisture, and ultraviolet (UV) light.
  • Flexible and compressible for handheld use and easy installation.
  • Suitable for applications with temperatures from Low: -60° up to 275 degrees F, such as fume removal and industrial ventilation.
  • Smooth interior provides minimal friction loss and efficient air flow.
Check Stock

Solder Fume Extractor Smoke Absorber - Nopwer Smoke Ventilation Filter for Soldering Diy Welding Laser Engraver Nail Salon Hair

  • SOLDER FUME EXTRACTOR: Nopwer fume extractor has 4 to 5 times the air purifying capacity of ordinary solder fume extractor. Effectively absorbs smoke, dust and harmful gases from the air. Purify the air. And the purification rate is 99.99%..
  • THREE-LAYER FILTRATION SYSTEM: The solder fume purifier has three filtration layers. The filtration effect and filtration capacity are 4 times of the common single-layer filter cartridge. Each layer can be replaced individually. Long service life..
  • UNIVERSAL SMOKING TUBE: Highly sealed smoking tube with 80cm length. Can be adjusted 360 degrees. Free positioning without external support. Easy to install. Easy to operate..
  • POWERFUL FUNCTION: Control the air volume suction power by button. Can effectively remove fumes and harmful gases. Used for Diy welding, laser engraving, nail and hair salon..
  • AFTER SALES SERVICE: Solder fume extractor are strictly quality controlled. You will have 3 months free return service. If you have any use and quality problems. I will give you a satisfactory reply within 12 hours.Add to Cart with Confidence！.
Check Stock

Flx-Thane MD Polyurethane Duct Hose, Clear, 2\ ID, 0.030\ Wall, 25' Length

  • Duct hose for light bulk material handling, dust collection, fume extraction, and food preparation.
  • Medium weight polyurethane is clear for monitoring flow, reinforced with a bronze-coated spring steel wire helix, and resistant to chemicals, moisture, abrasion, and tearing.
  • Very flexible and compressible for handheld use and easy installation.
  • Suitable for applications with temperatures up to 225 degrees F, such as food preparation and landfill venting.
  • Made from FDA acceptable materials for use in food preparation plants and pharmaceutical drug handling applications.
Check Stock

Pacific Echo 195-3x100 PVC Spiralite 195 Clear Heavy Duct Hose, 100' Length, 3.54\ Hose OD, 3\ Hose ID, Max 75 psi

  • Manufactured with FDA acceptable materials.
  • Good chemical and moisture resistance with good compressibility and chemical and moisture resistance.
  • Great flexibility with tight bending characteristics.
  • Excellent choice for ventilation applications, including dust and fume removal.
  • This hose is stocked in every size up to 18" ID and can ship in 24 hours.
Check Stock

Urethane Flex (Heavy Duty) Clear Duct - 8\ ID x 50ft Length Hose (Fully Stretched)

  • Duct hose for air and furnace duct cleaning, dust removal, fume extraction, and food preparation applications.
  • Lightweight PVC is clear for monitoring flow, reinforced with a spring steel wire helix, and resistant to chemicals and moisture.
  • Very flexible and compressible for handheld use and easy installation.
  • Suitable for applications with temperatures up to 160 degrees F, such as residential and light commercial duct cleaning and ventilation.
  • Made from FDA acceptable materials for use in food preparation plants and pharmaceutical drug handling applications.
Check Stock

DCT Dust Collector Accessories Kit – 1.25in x 10ft Vacuum Hose, Dust Collection Fittings, and Vacuum Reducer

  • ...ideal for connecting a random orbital sander, palm sander, biscuit joiner, or any other power tool with small dust collection ports – Check the inner and outer (ID and OD) diameter of your vacuum ports and power tool ports.
  • VARIOUS APPLICATIONS: Designed to carry away sawdust, powder, wood chips, saw tailings, and fume ventilation from your woodworking equipment.
  • Flexible construction and tight bending radius allow you to maneuver and position the flexible vacuum hose anywhere in your shop without worrying about kinks.
  • Works with most routers, saws, miter saws, or any other small power tool connections (measure for exact fitment).
  • BUILT TO LAST: Flexible dust collection hose constructed from ABS plastic with ribbing for maximum strength and longevity.
  • Durable enough to not collapse under the pressure of your dust collector equipment while still remaining flexible.
  • Includes rubber fittings that attach on both ends along with plastic reducers for your convenience.
Check Stock

Valtcan Fume Extractor Soldering Fan Smoke Absorber

  • Powerful Fume extractor removes Smoke fume, soldering fumes, flux smoke, odor from soldering stations, workstations, nails, glasswork, pyrography, paint etc quick, safely and efficiently..
  • Solder Flux fume extractor fan 496 model equivalent to the 493 plus extra filters. Comes with 3 Active carbon filters, Easily replaceable by swamping out old for new one in the filter slot. Pull filter guard out to remove filter and replace with new one. Then push back filter guard to hold filter in place..
  • Adjustable tilt for optimum solder smoke absorption angle from your workbench. Twist knobs at two ends to loosen and then adjust tilt of smoke absorber. Fasten knobs to secure fan front when desired tilt is obtained..
  • Made of ESD safe material, lightweight and durable material. Low noise and high- efficient fan operates at acceptable db levels in solder workstations..
  • On/off button located in back of smoke absorber fan. Plugs into AC socket for power. Comes in 493 model box with extra filters..
Check Stock

KOTTO Strong Suction Hose Fume Smoke Absorber for Soldering Electric Iron Welding 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter,2 Pack Set Replacement HEPA Filter

  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction..
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs..
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W,....
  • Replacement HEPA Filter for Solder Smoke Absorber..
  • Replacement HEPA Filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room..
Check Stock

Soldering Iron Station with Fume Extractor 80W Soldering Station 60W Soldering Iron Smoke Absorber Solder Wire LED Lighting Fast Heating Auto Sleep Soldering Station LCD Digital Display

  • ➤【Multifunction】: Soldering iron kit including soldering station and fume extractor with LED light is a fully functional combination. Equipped....
  • ➤【Perfect 12-in-1 soldering kit】: 1 x 80-Watt soldering station, 1 x fume extractor, 5 x soldering tips, 1 x holder for soldering iron, 1 x....
  • ➤【High power & high precision & auto sleep mode】: The combination soldering station is with 80W high power, fast heating up, takes 30 seconds to....
  • ➤【Fume extractor】: The foldable and angle-adjustable smoker absorber removes solder smoke efficiently to create a safer working condition. Low....
  • ➤【We support you】: This appliance has passed certifications of FCC, C-TUV-US, CE, GS, EMC, ROHS and REACH. Noah provides 1-year warranty for....
Check Stock

KOTTO Strong Suction Hose Fume Smoke Absorber for Soldering, Electric Iron Welding, 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter [Updated, Hose pre-attached]

  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction..
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs..
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O..
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply)..
  • US-based customer support, 30 days full satisfaction no question asked return period..
Check Stock

OMTech XL-300 Fume Extractor with 5 Stage Air Filter Wheeled Smoke Absorber & Purifier with Remote Control 330W Air Purifier for Laser Cutters & Engravers Soldering Stations CNC Machines

  • INDUSTRIAL FUME EXTRACTOR: The 330W DC motor on OMTech's industrial-strength XL-300 fume extractor creates a powerful 69 ft./sec. airflow to pull in....
  • 5-STAGE FILTER: Our smoke extractor continuously pulls in your machine's fumes and debris, running them progressively through its cotton outer filter,....
  • HIGHLY MOBILE: The 4 quality caster wheels move this small but dependable smoke purifier easily between your devices when needed and then lock smartly....
  • INTUITIVE CONTROL: The digital control panel lets you easily adjust this purifier's air flow and offers timed operation to match each job.
  • SATISFACTION GUARANTEED: OMTech backs this fume extractor with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll....
Check Stock

Easy-Off Pro Fume Free Oven Cleaner, 24 oz, 2 Count

  • FUME FREE OVEN CLEANER: Removes tough oven grease and food! Perfect for oven spot cleaning in 30 seconds!.
  • SAFE FOR EVERYDAY OVEN CLEANING: Fume free formula.
  • MULTIPURPOSE: Use to clean ovens, oven doors, broilers, broiler pans, and stainless steel surfaces.
  • EASY TO USE: Just spray on the stain and wipe! No gloves required - even for stubborn messes!.
Check Stock

Msfullsea Vertical Laminar Flow Hood Air Flow Clean Bench Workstation Vertical Laminar Dust Free Room Worktable for Phone LCD Repair Only 1 HEPA Filter (Air Flow Hood)

  • The fume extractor arm is generally used in laboratories, chemical plants, hospitals, mold halls, chemical reaction kettles, welding industry, injection molding machine industry and etc..
  • Lab Fume Hoods can discharge fume, dust, gases, and suspended particles, etc..
  • Smoke extractor arm is mounted on the ceiling，360°free rotation， positioning joints can be swung up and down freely, there are buttons to adjust the tightness of the joints..
  • Transparent lid made of PC material can It can withstand high temperatures of 150 degrees Celsius, with a gas control valve, manually adjust the external valve knob to control the gas flow..
  • Using expansion screws to fix the ceiling fixed base of the lab extractor hood, use self-tapping screws to fix the 360-degree rotation joint, the T-junction connects with the smoke exhaust pipe or smoke system..
Check Stock