Categories

Best Ga Steel Coils

KHZBS rubber Resin Strap Replacement for G-Shock GA100 GA110 GA120 GA150 GW8900 Watch band

  • Selected high-quality resin rubber, moderate hardness, more sturdy than ordinary rubber material, comfortable to wear.
  • The buckle is made of stainless steel buckle for durability.
  • This strap is an alternative to g-shock GA-100 / GA-110 / GA-100C / GA-300 / GA-120 / GA-200/ GA-150 / GA100B-4 / GD-100 / GD-110 / GD-120 /....
  • You can get: 1 set of straps, 1 tool pin, 3 connecting rods.
  • Free tools: can help you quickly install DIY in a short time.
Check Stock

KHZBS rubber Resin Strap Replacement for G-Shock GA100 GA110 GA120 GA150 GW8900 Watch band

  • Selected high-quality resin rubber, moderate hardness, more sturdy than ordinary rubber material, comfortable to wear.
  • The buckle is made of stainless steel buckle for durability.
  • This strap is an alternative to g-shock GA-100 / GA-110 / GA-100C / GA-300 / GA-120 / GA-200/ GA-150 / GA100B-4 / GD-100 / GD-110 / GD-120 / GLS-100/GLS-8900 / GR-8900 / GW-8900.
  • You can get: 1 set of straps, 1 tool pin, 3 connecting rods.
  • Free tools: can help you quickly install DIY in a short time.
Check Stock

SS316L,Twisted Fused Clapton Coil,Prebuild Coil, Heating Wire Coil (32GA4/38GA(0.7Ω) 10Pcs/Box)

  • ...o remove gunk from your coil and the dirt and flavor from your cotton. The Dry cycle blows hot air onto your cotton. NOTE: An Ultrasonic cleaner is not intended for soft materials. The fast action actually embeds the dirt into the cotton..
  • If possible rinse your coil with hot water under the sink, fill the stainless steel cup with water to the fill line. Place your coils in the basket and lay on top of the stainless steel cup. Run the Clean Cycle, 15 minutes for smaller coils and 30 minutes for larger coils. Remove the stainless steel cup and rinse your coils. Place the basket with the clean coils on the Robo2020 and start the Dry Cycle. Smaller coils take 15 minutes to dry and larger coils may take 30 minutes to dry..
  • Made in the USA - Manufactured in West Virginia.
  • Maximize Flavor - Eradicate old stubborn flavors & clean mouthpieces and tanks. Also please note the darker liquid leaves stains in the cotton, so the cotton will be clean but may looked stained. Think of washing a cotton shirt with a mustard stain. The washed cotton is clean but may still have a stain. It is always best to clean and dry your coils before they are so gunked up and beyond repair. NOTE: Burnt coils are beyond repair..
Check Stock

American Bass VFL 12" Woofer 5000w Rms / 10000w Max Dual 1 Ohm Voice Coils Vfl-comp12d1 Signature

  • Triple Stacked 168oz. Magnets (504oz. Total) And Top Spider With Woven Tinsel.
  • Direct Connection 10ga. Pure Copper Power Cable.
Check Stock

MCXGL Heavy duty nylon watch strap + Adapter 16mm Replacement for GShock Dw5600 GW6900 GA110 GA120 GA100 mens watch band

  • MCXGL Heavy-duty bulletproof nylon fabric, strong and durable, comfortable to wear, stainless steel buckle perfectly matches the watch， Ideal for....
  • Suitable for G-shock most watches with lug width of 16mm, but not all.
  • E.g Compatible for G-shock series:DW5600、DW6900、GA110、GA120、GA150、GA200、GA300、GA400、GD 100 、GA100 、GA110 G100....
  • Package includes ：2*16mm adapter；1*22mm nylon strap；1 *tool ，3*spring bars.
  • Some models may need to modify the adapter to adapt, if your model is not listed, please contact us before buying,Good after-sales service and....
Check Stock

MCXGL 16mm Resin Strap Replacement for G-Shock ga110 ga100 ga120 gd100 g8900 Men s Rubber Watch Band

  • The strap is made of high-quality resin rubber, which is neither too hard nor too soft. It is stronger than the general rubber material belt,....
  • Hypoallergenic silver-plated matte stainless steel buckle. Sturdy structure, durable.
  • Compatible with casio GA-100 / GA-110 / GA-100C / GA-300 / GA-120 / GA-200/ GA-150 / GA100B-4 / GD-100 / GD-110 / GD-120 / GLS -100/GLS-8900 / GR-8900....
  • Non-original, excellent alternative. Make your watch look the same as the original.
  • You can get: 1 set of straps, 1 tool, 3 spring bars. high-quality resin rubber strap, waterproof and sweat-proof, feel comfortable, suitable for many....
Check Stock

Makita XSJ02Z 18V LXT 16 Gauge Compact Straight Shear

  • Cuts up to 16 ga. mild steel, 18 ga. stainless steel and easily cuts through 22 ga. spiral duct seams.
  • Makita-built 4-pole motor delivers 4,300 strokes per minute for faster cutting.
  • Compact barrel grip design with rubberized soft grip enables one-handed operation in various orientations.
  • High performance double blade design minimizes material distortion and produces clean cuts with minimal burrs.
  • Radius cutting capability allows for easy turns and circular cutting applications.
Check Stock

Milwaukee M12 FUEL 16 Gauge Variable Speed Nibbler - No Charger, No Battery, Bare Tool Only

  • Fast, Clean Cuts in 16GA Mild Steel Up to 7 Feet per Minute.
  • Power to Cut 18GA Stainless and 12GA Aluminum.
  • Variable Speeds Provides Maximum Control for any Job.
  • Tool Free 360 Degree Die Holder Rotation.
Check Stock

Glarks 3 Pack Stainless Steel Welding Gauge Set, 25-3000um Wet Film Comb + Wire Metal Sheet Thickness Gauge + Round Dual-Sided Wire Cable Sheet Gage Standard Thickness Metal Gauge AWG and SAE

  • ...What You Get】: In this welding gauge kit, it include a pack of wet film comb, a pack of wire metal sheet thickness gauge, and a pack of dual-sided wire cable sheet gage total 3 pack. They are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the welding gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: Wet film comb range is 25-3000um. Dual-sided round wire gauge range is 0-36 American standard.
  • Wire metal sheet thickness welding gauge is 24GA (.0239), 22GA (.0299), 20GA (.0359), 18GA (.0478), 16GA (.0598), 14GA (.0747), 1/8" (.0125), 10GA(.1345), 3/16" (.1875), 1/4" (.250), 5/16" (.3125), (.024"), (.030"), (.035")..
  • ★【Pratical Measuring Tools】: The interval division on the gauge is detailed and having high measuring precision. Sizes and numerals are etched on the surface for clarity and easier reading. Good to determine the thickness of the material before welding or working, permits a quick and accurate measuring of the most popular welding thickness..
  • ★【Wide Application】: They measure accurately and have almost no errors. Wet film comb ty....
Check Stock

8-14GA Stainless Steel Basic Septum Pincher Nose Ring with 2 Black O-Rings Silver Tone 12GA 2mm

  • STYLE: Basic Septum Pincher Nose Ring with 2 Black O-Rings.
  • GAUGE/BAR THICKNESS: choose 8GA (3mm), 10GA (2.4mm), 12GA (2mm), or 14GA (1.6mm).
  • AVAILABLE IN: silver tone, gold tone, black, or rainbow.
Check Stock

JHTII 2 Piece Stainless Standard Gauge Thickness Tool, Round Dual Sided Wire Gauge & Sheet Thickness Welding Gauge

  • Round Dual Sided Wire Gauge: 0-36 US standard, the dual sided clear digital scaledesign makes it easy to read marks from all directions..
  • High Quality Material: Made of stainless steel.Through multiple processes, not easy to deform and abrasion resistant, to ensure maximum strength and durability, it will not rust in dry environment, compact and light in weight, easy to carry and easy to store..
  • Sheet Thickness Welding Gauge Function: This Metal Gauge is the most useful and helpful for checking metal sheet wire size before welding or working. You can get a precise and accurate data ahead of welding, avoiding unnecessary mistakes..
  • Size: Wire/Metal Sheet Thickness Welding Gauge:24GA (.0239), 22GA (.0299), 20GA (.0359), 18GA (.0478), 16GA (.0598), 14GA (.0747), 1/8" (.0125), 10GA(.1345), 3/16" (.1875), 1/4" (.250), 5/16" (.3125), (.024"), (.030"), (.035").
  • Dual-Sided Round Wire Gauge: 0-36 gauge (0.19-8.23mm).
  • Useful Handy Tools: Using these gauges to determine the thickness of material before working in order to save time and material. The quality is great, and the numbers are very easy to read, even if the tool is dirty, you can still read without problems, it’s a profesional tool, heavy and feels great on the hand..
Check Stock

MILLER ELECTRIC MIG Welder,120/240VAC,1 Phase

  • Price For: Each Series: Millermatic 211 Aluminum - Material Thickness: 18 ga. to 3/8" Mild Steel - Material Thickness: 24 ga. to 3/8" Stainless Steel - Material Thickness: 20 ga. to 1/4" Hz: 60 Input Amps: 17.
  • Millermatic 211 MIG Welder with Advanced Auto-Set - 907614.
  • Includes: 10 ft. M-10 MIG Gun, 10 ft. Work Cable with Clamp, Built-In Gas Solenoid Valve, Dual Gauge Regulator with Gas Hose, Sample Spool of 0.030 in. Solid Wire, (2) 0.030 in. Contact Tips, (2) Hook-and-Loop Cord Wraps, Material Thickness Gauge Overall Width: 20-1/2 inch Standards: CSA Certified Overall Height: 12-1/2 inch.
  • Features: Advanced Auto-SetTM, Auto Spoolgun Detect, Smooth-StartTM, Angled Cast-Aluminum Drive System, Quick SelectTM Drive Roll, Thermal Overload Protection, Fan-on-Demand Phase: 1 Input Voltage: 240VAC Welded Material: Aluminum, Steel Output Range: 30 to 230A DC Welding Processes: MIG/Flux Core Portability: Handheld Portable Application: Maintenance, Repair, Auto/Cycle Shops, Farm and Ranch Jobs, Hobby Welding.
Check Stock

Milwaukee 3-Piece Aviation Snip Set - 48-22-4533

  • One Handed Locking - Ease of use/Quick open & close (Patent Pending).
  • Flush Bolt Design - Won't hang up on material (Patent Pending).
  • Forged Alloy Steel Blades - For Maximum Tool Strength.
  • Cuts: Up to 18ga CRS (Cold Rolled Steel).
Check Stock