Baseball Infield Drag Mat
- Rugged all-steel drag mats have 1" x 1" mesh with 13 gauge galvanized connecting rods.
- Mesh material is 3/8" x .050 galvanized steel.
- Includes heavy-duty angle iron across front of mat and a rope with handle for pulling.
Check Stock2x4basics Shed Kit with Peak Roof
- Each kit includes galvanized steel angle brackets, galvanized steel stud brackets, and complete materials list and building plans (including exact lumber cuts required) for 3 sizes peak roof style sheds.
- 7′ x 8′ shed requires 1 kit, 8′ x 14′ shed requires 2 kits, 10′ x 22′ shed requires 3 kits.
- Manufacturer Of Standard Plumbing Supply.
Check Stock2x4basics Shed Kit with Barn Roof
- Each kit includes galvanized steel angle brackets, galvanized steel stud brackets, and complete materials list and building plans (including exact lumber cuts required) for 3 sizes barn roof style sheds.
- 7′ x 8′ shed requires 1 kit, 8′ x 14′ shed requires 2 kits, 10′ x 22′ shed requires 3 kits.
- Manufacturer Of Standard Plumbing Supply.
Check StockEZBUILDER 7 x 8 Foot Peak Roof Storage Shed Garage Barn DIY EZ Framing Kit with 24 Galvanized Steel Angles and 12 Base Plates (No Wood Included)
- DIY framing kit allows you to create your own 7x8 foot storage shed frame with a peak roof design.
- Wood and finish materials are NOT included.
- Construct with wood or composite 2x4s and add your own roofing and siding to match your home.
- Build whatever size you need: 1 kit for a 7’x8’, 2 kits for 8’x10’, and 3 kits for a 10’x22’.
- Multiple screw points and reinforced truss design provide you with superior strength to your frame.
- Galvanized steel base and angle brackets are 50 percent stronger and won't rust or rot.
- No miters or complex measurements are needed, galvanized angle brackets create the perfect angle every time.
- Only straight, 90-degree cuts are required.
- Kit includes: 24 steel angles, 12 steel base plates, 4 door header brackets, EZ miter template, and easy-to-follow plans.
Check StockMroMax 6PCS Right Angle Bracket Corner Bracket 2.76\ x 1.93\ (L x W) Galvanized Angle Bracket Fastener Right Angle Bracket Suitable for Furniture Wooden Cabinet
- 【Product Dimension】 Length: 70mm/2.76".
- Hole Size: 4.5mm/0.18"【High-Quality Materials】 Our right-angle brackets are made of high-quality metal iron, with galvanized surface treatment, high strength, wear resistance, corrosion resistance and high temperature resistance, and can be used for a long time..
- 【High-Quality Materials】 Our right-angle brackets are made of high-quality metal iron, with galvanized surface treatment, high strength, wear resistance, corrosion resistance and high temperature resistance, and can be used for a long time..
- 【Easy to Installation】 Unique counterbore design, the screws will not protrude after installation, making it more beautiful..
- 【Wide Range of Applications】 Corner Braces are widely used in furniture, construction and outdoor facilities, such as tables, chairs, bed frames, racks, cabinets, guardrails, shelves, etc. Used for connection, reinforcement and support..
- 【Package Content】 6PCS x Right Angle Bracket.
Check StockDuroSTEEL Janus 8'x8' Commercial 1000 Series Metal Roll Up Door & Hardware Direct
- General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
- Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
- Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
- Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
- Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check StockDuroSTEEL Janus 10'x9' Commercial 1000 Series Metal Roll Up Door & Hardware Direct
- General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
- Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
- Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
- Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
- Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check StockDuroSTEEL Janus 10'x12'Commercial 1000 Series Metal Roll Up Door & Hardware Direct
- General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
- Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
- Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
- Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
- Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check StockDuroSTEEL Janus 8'x10' Insulated Commercial 1000i Series Metal Roll Up Door & Hardware Direct
- General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
- Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
- Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
- Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
- Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stockarena Square Cut Drag Short Training Swimsuit, Green - Black - Black, 30
- Galvanized steel mesh construction effectively drags and grooms the dirt to create a smooth, even surface.
- Maintains the dirt on the infield baseline, the pitcher's mound, the batter's box or the home plate area.
- Suitable for use before and after games, as well as between innings.
- Angle iron on the front of the mat provides smooth dragging performance.
- Heavy-duty chain attaches to tractors and other outdoor power equipment for fast, simple use.
- Mesh is 3/8" x .050 galvanized steel, Weight: 68 lbs..
Check StockFrienda 20 Pcs Copper Nails for Killing Trees Stump Root 3.5 Inch Long Nail Spikes for Killing Tree Stump Removal Spikes with 2 Pcs 3.5 Inch Large Steel Nails and 1 Pcs Storage Box
- 【Disc Dimension】 Stump Grinder Disc Arbor size : 5/8" (16mm)/Diameter: 4"/Suit For 4" (100mm) or 4-1/2" (115mm) Angle Grinder.Maximum speed (RPM)....
- 【Unique Chromium Plating Reinforcement Chain】The improved patented tooth profile, the use of excellent materials, superb heat treatment, and hard....
- 【Optimised Galvanized Steel Sheet】After simulation analysis, SchuhRia uses a 0.4inch(1cm) thick galvanized steel sheet to reduce weight while....
- 【Disc and Chain Upgrade】 SchuhRia focas on technological innovation, continues to upgrade products, and develops all kinds fo chains to meet....
- 【Attention and Warning】To avoid incorrect operation result in personal injury,please strictly follow the instructions.Install the angle grinder....
Check StockIPS CORPORATION 86249 Roof Flashing 3-in-1 with Elastomeric Collar, 3 x 12 x 15.4 inches, Steel
- The roof flashing is compatible with 1-1/4 inch, 1-1/2 inch, 2 inch or 3 inch pipes.
- Constructed of a durable galvanized steel base to prevent rust and cracking.
- Features an elastomeric rubber collar that is resistant to ultraviolet, ozone and harsh weather.
- Designed to direct water away from critical areas on the roof and prevent penetrations.
- Compatible with any roof pitch up to a 45-degree angle.
- Fits 1-1/4" or 1-1/2" 2" and 3" vent pipe.
- Tested for ultraviolet ozone & weather resistance.
- Galvanized base w/adjustable elastomeric collar.
Check Stock9-12MM Cable Pulling Socks Grips Wire Mesh Puller Socks Grip Mesh Puller Cable Puller Socks
- 9-12MM: In color Red, force 700lbs(317kgs), weight 20g, length 310mm..
- MATERIAL: Steel galvanized single strand preparation, anti rust, long used and durable..
- DESIGN: Eye mesh design, single wave galvanized mesh cable socks, keep your cable from scratching, anti slip, easily grip the cable through the pipe line, the wall or the telecom..
- CABLE SOCKS: Great tools for electrician, it is soft, and you can bend it. (But be careful, please do not bent it right angle.).
- APPLICATION: Different size suits for cable with different diameter, by using in pipe cable laying and cable pulling..
Check Stock