Categories

Best Galvanized Angle Steel

DuroSTEEL Janus 10'x12'Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

DuroSTEEL Janus 8'x10' Insulated Commercial 1000i Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

BSN Rigid Drag Mat 6-feet x 18-inch

  • Rugged all-steel drag mats have 1" x 1" mesh with 13 gauge galvanized connecting rods.
  • Mesh material is 3/8" x .050 galvanized steel.
  • Includes heavy-duty angle iron across front of mat and a rope with handle for pulling.
Check Stock

Baseball Infield Drag Mat

  • Rugged all-steel drag mats have 1" x 1" mesh with 13 gauge galvanized connecting rods.
  • Mesh material is 3/8" x .050 galvanized steel.
  • Includes heavy-duty angle iron across front of mat and a rope with handle for pulling.
Check Stock

Oncourt Offcourt Tennis Grip Trainer Swing Tool - (3-Pack) - Start Rite Swinging Training Aid Equipment

  • EXTREME REBOUND BOUNCE – The high-quality netting delivers a consistently extreme bounce to give players excellent shot opportunities. Created using 2mm knotless PE with a 28mm mesh, the net will deliver an elite performance with excellent longevity..
  • GALVANIZED STEEL REBOUNDER FRAME – Manufactured from premium grade materials, such as galvanized steel, the tennis trainer rebounder is durable and long-lasting. The 1mm thick, 38mm OD galvanized steel frame features a black powder coating for added strength and a weatherproof, rust resistant finish..
  • DEVELOP YOUR GAME & TENNIS SKILLS – Always guaranteeing a returning tennis ball, the RapidFire Mega Tennis Rebounder net is an excellent bounce back tool for shot development. Improve your groundstrokes and volleying of tennis balls with the court/backyard tennis trainer..
  • ADJUST YOUR ANGLE – Unique to any other bounce back net, the RapidFire Mega allows players to be their own tennis tutor/tennis coach and fully adjust the angle to suit different training drills, ensuring full control of the trajectory of tennis balls with every stroke..
  • SMALL OR LARGE TENNIS WALL – Expertly suited to all ages, abilities, conditions & tennis court surfaces, the RapidFire Mega Tennis Rebounder is available in two siz....
Check Stock

2x4basics Shed Kit with Peak Roof

  • Each kit includes galvanized steel angle brackets, galvanized steel stud brackets, and complete materials list and building plans (including exact lumber cuts required) for 3 sizes peak roof style sheds.
  • 7′ x 8′ shed requires 1 kit, 8′ x 14′ shed requires 2 kits, 10′ x 22′ shed requires 3 kits.
  • Manufacturer Of Standard Plumbing Supply.
Check Stock

2x4basics Shed Kit with Barn Roof

  • Each kit includes galvanized steel angle brackets, galvanized steel stud brackets, and complete materials list and building plans (including exact lumber cuts required) for 3 sizes barn roof style sheds.
  • 7′ x 8′ shed requires 1 kit, 8′ x 14′ shed requires 2 kits, 10′ x 22′ shed requires 3 kits.
  • Manufacturer Of Standard Plumbing Supply.
Check Stock

EZBUILDER 7 x 8 Foot Peak Roof Storage Shed Garage Barn DIY EZ Framing Kit with 24 Galvanized Steel Angles and 12 Base Plates (No Wood Included)

  • DIY framing kit allows you to create your own 7x8 foot storage shed frame with a peak roof design.
  • Wood and finish materials are NOT included.
  • Construct with wood or composite 2x4s and add your own roofing and siding to match your home.
  • Build whatever size you need: 1 kit for a 7’x8’, 2 kits for 8’x10’, and 3 kits for a 10’x22’.
  • Multiple screw points and reinforced truss design provide you with superior strength to your frame.
  • Galvanized steel base and angle brackets are 50 percent stronger and won't rust or rot.
  • No miters or complex measurements are needed, galvanized angle brackets create the perfect angle every time.
  • Only straight, 90-degree cuts are required.
  • Kit includes: 24 steel angles, 12 steel base plates, 4 door header brackets, EZ miter template, and easy-to-follow plans.
Check Stock

arena Square Cut Drag Short Training Swimsuit, Green - Black - Black, 30

  • Galvanized steel mesh construction effectively drags and grooms the dirt to create a smooth, even surface.
  • Maintains the dirt on the infield baseline, the pitcher's mound, the batter's box or the home plate area.
  • Suitable for use before and after games, as well as between innings.
  • Angle iron on the front of the mat provides smooth dragging performance.
  • Heavy-duty chain attaches to tractors and other outdoor power equipment for fast, simple use.
  • Mesh is 3/8" x .050 galvanized steel, Weight: 68 lbs..
Check Stock

Frienda 20 Pcs Copper Nails for Killing Trees Stump Root 3.5 Inch Long Nail Spikes for Killing Tree Stump Removal Spikes with 2 Pcs 3.5 Inch Large Steel Nails and 1 Pcs Storage Box

  • 【Disc Dimension】 Stump Grinder Disc Arbor size : 5/8" (16mm)/Diameter: 4"/Suit For 4" (100mm) or 4-1/2" (115mm) Angle Grinder.Maximum speed (RPM)....
  • 【Unique Chromium Plating Reinforcement Chain】The improved patented tooth profile, the use of excellent materials, superb heat treatment, and hard....
  • 【Optimised Galvanized Steel Sheet】After simulation analysis, SchuhRia uses a 0.4inch(1cm) thick galvanized steel sheet to reduce weight while....
  • 【Disc and Chain Upgrade】 SchuhRia focas on technological innovation, continues to upgrade products, and develops all kinds fo chains to meet....
  • 【Attention and Warning】To avoid incorrect operation result in personal injury,please strictly follow the instructions.Install the angle grinder....
Check Stock

Cutting Wheel 4-1/2 Inch 100 PCS Cut Off Wheel 4.5"x.047"x7/8" Cutting Disc Ultra Thin Metal & Stainless Steel,Cutting Wheel Fits Angle Grinder Saw Grinder Metal Cut Tools

  • FITS ANY ANGLE GRINDER ：Grinder blades is 4.5"x.047"x7/8" total in 100 PCS.Fit for 4-1/2”Angle Grinders and compatible with All 4-1/2”Angle Grinders..
  • MULTIPLE UESES : Grinding Wheel are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals for aggressive cutting action.Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel.fast burr free cutting.
  • Package List:100Pcs 4 1/2 Inch Cut Off Wheel.
Check Stock

Qualward Sink Repair Kit System Undermount Sink Brackets for Kitchen, Silver Steel

  • GREAT CAPACITY: Each package has 6 adjustable rods,1 Allen Key and all the screws necessary, heavy duty brackets with 680 lbs..
  • STURDY HEAVY DUTY STEEL: Galvanized steel and anti-rust, undermount sink brackets are built tough to ensure durability!.
  • ADJUSTABLE: The angle of bracket head/hinge could swivel to any desired angle..
  • EASY TO ASSEMBLE: Not need to remove any plumbing at all.
  • Just use your thumb turnbuckle with the Allen key to secure the stud in place, it will work..
  • EFFECTIVE PROTECTION: Prevents damage of cabinets and countertops..
Check Stock

SAMSUNG 2020 65\ & 75\ The Terrace Wall Mount

  • OUTDOOR OPTIMIZED - Holds up strong and sturdy even in outside environments.
  • WEATHER-FRIENDLY - Galvanized steel frame and stainless steel screws prevent corrosion and discoloration from rain or sunlight.
  • SAFE INSTALLATION - Built to minimize all risk factors, with safe loading weight of 88 lbs.
  • MULTI-DIRECTIONAL TILT - Tilts up/down, left/right, and forward for the perfect light and viewing angle..
Check Stock