Categories

Best Galvanized Bends

Triple Album Collection Vol 2

  • 3/4-Inch assembled Aluminum Bender includes Kleins unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers.
  • Compatible with Kleins 3/4-Inch Angle Setter (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends.
Check Stock

Klein 56206 Conduit Bender with Handle, 1/2'

  • 3/4-Inch assembled Aluminum Bender includes Kleins unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers.
  • Compatible with Kleins 3/4-Inch Angle Setter (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends.
Check Stock

Dryer Cleaner Vent Brush - 30 Inch Long Flexible Dryer Vent Cleaner & Refrigerator Condenser Coil Brush Auger Clothes Lint Trap Remover

  • SPECS: 1 PACK, Conical design, polished wood handle 25" bristle length. Bends well without deformation to the shaft..
  • Deep Cleaning：Using this long flexible brush to clean the buildup lint in the cloth dryer vent pipe and fridge-freezer coil cleaner. It also can be used to clean the dust under furniture ,appliances, air path, rexhaust vents..
  • DESIGN & QUALITY: Sturdy thick nylon bristles mounted on a galvanized wound steel bendable wire shaft moves through narrow slots picking up the lint, with a non-slip controllable rigid plastic handle to reach inaccessible places easily – Lint vacuum remover rubber tip prevents scratches..
  • SAVE MONEY: Using this brush to cleaning the trapped lint in dryer gap and exhaust port. refrigerator condenser coils cools down the contents faster, thereby making the two..
  • 100% MONEY-BACK GUARANTEE: Backed by 100% guarantee that you are fully satisfied with your product or receive your money back. We ensure you will get a good dryer cleaner brush set with super reasonable price..
Check Stock

Universal 3 Inch Custom Tubing Mandrel Bend Pipe Straight & U-Bend Kit

  • Cut out the middle man and build the perfect automotive exhaust system your project deserves!.
  • Universal kit includes all the necessary 3″ exhaust pipe bends and straights to allow you to run your own custom exhaust systems.
  • 3″ mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Each 3″ smooth mandrel bent tube is expanded on one end to allow easy slip-fit installation.
  • Includes 4 each: 45 degree bends, 90 degree bends, 180 degree bends, and 46″ inch straight pipe exhaust lengths.
Check Stock

Universal 2.5 Inch Custom Tubing Mandrel Bend Pipe Straight & U-Bend Kit

  • Cut out the middle man and build the perfect automotive exhaust system your project deserves!.
  • Universal kit includes all the necessary 2-1/2″ exhaust pipe bends and straights to allow you to run your own custom exhaust systems.
  • Mild steel exhaust pipes feature a natural, anti-rust coating for corrosion prevention.
  • Includes 4 each: 45 degree bends, 90 degree bends, 180 degree bends, and 46″ inch straight pipe exhaust lengths.
  • Each 2-1/2″ smooth mandrel bent tube is expanded on one end to allow easy slip-fit installation.
Check Stock

Speedway Motors Pickup Truck Mild Steel Mandrel Bend Dual Exhaust Pipe Kit, 2-1/2

  • Cut out the middle man and build the perfect automotive exhaust system your project deserves!.
  • Universal kit includes all the necessary 2-1/2″ exhaust pipe bends and straights to allow you to run your own custom exhaust system.
  • Mild steel exhaust pipes feature a natural, anti-rust coating for corrosion prevention.
  • Includes 4 each: 45 degree bends, 90 degree bends, 180 degree bends.
  • plus 6 46″ inch straight pipe exhaust lengths.
  • Each 2-1/2″ smooth mandrel bent tube is expanded on one end to allow easy slip-fit installation.
Check Stock

Eastwood 12 in. Box and Pan Sheet Metal Brake Easy Adjustment Box with 5 Adjustable Fingers

  • The Eastwood 12 Inch Box And Pan Sheet Metal Brake Is The Perfect Size For A Small Shop Or Home Use..
  • Bends Sheet Metal Up To 12 in. And Makes Bends Up To 135 Degreess.
  • Metal Gauge: Up To 20 Gauge Steel, 16 Gauge Aluminum Or 24 Gauge Stainless.
  • Mounting Area Dimensions: 14 in. X 10.75 in..
  • Overall Dimensions: 16.5 in. Wide X 10.75 in. Deep X 14.25 in. Tall.
  • Removable Fingers To Create Pans Or Boxes.
  • Bends Up To 20 Gauge Steel, 16 Gauge Aluminum Or 24 Gauge Stainless Steel.
Check Stock

Klein Tools 51606 Aluminum Conduit Bender Full Assembly, 1/2-Inch EMT, Wide Food Pedal, Benchmark Symbols and Angle Setter

  • 1/2-Inch assembled Aluminum Bender includes Klein’s unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degree, 22.5-Degree, 30-Degree, 45-Degree, 60-Degree and corresponding offset multipliers.
Check Stock

Barrow Hard Tube Tool Suite for 14mm OD Rigid Tubing

  • Near perfect bends when using 14mm OD PETG tube.
  • Silicone tube insert prevents kinks and promotes smooth bends.
  • Pre-drilled holes allow easy mounting of mandrels to flat surface.
  • Pipe cutter to make correct sized tubing.
Check Stock

LuckIn Hardware Cloth 1/4 Inch, 36\ x 100' Galvanized Wire Mesh for Underground, 23 Gauge Easy Cutting Rabbit Wire Fence, Chicken Wire Mesh for Garden, Home Maintenance Project

  • Lifetime Supply - 23 Gauge heavy duty hot dipped 1/4 inch galvanized steel wire, offering a double rustproof zinc coating and sturdy enough to withstanding the test of the climate..
  • Safe Livestock - Wire mesh fence use to built cage for chicken coop, rabbit pen, duck run. Aiming to keep away from the animals like gopher, snake, rat, mole, cottontails, squirrel, etc..
  • Multipurpose Function - This wire mesh roll can appear in various scenes, included garden and vegetables' bed, to allow drainage and root growth, but not limited to tree guard, mesh filter, gutter guard, fishing tool, hail-proof net. Wait until you unlock other potential skills..
  • Simple Operation - 36" x 100' easy to be cut with scissor which you can tailor to your specific needs. It bends easily enough for you to shape it, but not too flimsy for it to fall apart..
  • Perfect Size - 1/4 Inch welded wire fencing has enough flexibility and tightness, which can obstruct the majority of small critters, providing safe protection to animals and plants..
Check Stock

LuckIn Hardware Cloth 1/2 Inch, 48\ x 50' Galvanized Wire Mesh for Underground, 19 Gauge Easy Cutting Rabbit Wire Fence, Chicken Wire Mesh for Garden, Home Maintenance Project

  • Lifetime Supply - 19 Gauge heavy duty hot dipped 1/2 inch galvanized steel wire, offering a double rustproof zinc coating and sturdy enough to withstanding the test of the climate..
  • Safe Livestock - Wire mesh fence use to built cage for chicken coop, rabbit pen, duck run. Aiming to keep away from the animals like gopher, snake, rat, mole, cottontails, squirrel, etc..
  • Multipurpose Function - This wire mesh roll can appear in various scenes, included garden and vegetables' bed, to allow drainage and root growth, but not limited to tree guard, mesh filter, gutter guard, fishing tool, hail-proof net. Wait until you unlock other potential skills..
  • Simple Operation - 48" x 50' easy to be cut with scissor which you can tailor to your specific needs. It bends easily enough for you to shape it, but not too flimsy for it to fall apart..
  • Perfect Size - 1/2 Inch welded wire fencing has enough flexibility and tightness, which can obstruct the majority of small critters, providing safe protection to animals and plants..
Check Stock

Klein Tools 51607 Aluminum Conduit Bender Full Assembly, 3/4-Inch EMT, 1/2-Inch Rigid, Wide Foot Pedal, Benchmark Symbols and Angle Setter

  • 3/4-Inch assembled Aluminum Bender includes Klein’s unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
Check Stock

Klein Tools 51605 Iron Conduit Bender Full Assembly, 1-Inch EMT and 3/4-Inch Rigid, Wide Foot Pedal, Benchmark Symbols and Angle Setter

  • 1-Inch assembled Iron Bender includes Klein’s unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Heavy duty cast ductile iron has the durability needed on the job site.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
Check Stock