Court Equipment Platform Tennis Net Post, 241

  • 1 x Pair of Round Galvanized Sleeves For 3'' Posts.
  • 1 x Pair of Tennis Post: Edwards 3" Classic Round Post.
Check Stock

Mofeez Gate Wheel for Metal Swing Gate with 1-5/8\ Thru 2\ Gate Frames, Gate Support Wheel for Chain Link Fence, Prevent Gate from Dragging

  • Support Door Weight Up to 500lbs---Tire grade solid rubber material, supper wear-resistant. Hot dipped galvanized finish steel for rust free..
  • Universal Use--- Mofeez gate helper wheel rolls easily over concrete/ grass/ pasture ground. If you plan to use it on soft pea gravel, we suggest you put something in the ground along the wheel path for it to ride more smoothly..
  • Lift your Gate Up to 8-3/4"--- Diameter:6”. There is 8-3/4" from the bottom of the wheel to the center of where the pipe would attach, so the door could be lifted up to 8-3/4". Width of tire:1-1/2” flat wheel will roll over your driveway's crushed rock surface..
  • Only for Round Fencing Pipe--- Helper gate wheel could be used on both pipe farm gates, chain link gates or any other gate that has a bottom ROUND pipe measuring 1-5/8” through 2”. NOTE: Check your gate frame diameter first..
  • Easy to Install --- Just prop the gate up to the height you need and attach the wheel on the bottom rail of the gate. Tighten U-bolt nuts securely until helper gate wheel couldn’t slip around the pipe..
Check Stock

ACON Air 4.6 Trampoline 15ft with Enclosure | Includes 15ft Round Trampoline and Safety Net | 110 Heavy Duty 8.5in Springs

  • 15 Ft. diameter high quality trampoline with enclosure | Great for adults and kids.
  • Weight 295 lbs | Height 36 inches (trampoline) | Optimized spring and mat dynamics.
  • 110 heavy duty 8.5" Springs | Mat UV treated cross-sewn polypropylene, 10 row stitching.
  • Galvanized frame pipes both inside and out | Frame pipe diameter 2 inches | Pipe thickness .08 inches.
  • Spring Puller Tool Included | For year round use.
Check Stock

Generic inch HVAC Duct Manual Damper with Sleeve

  • The round manual balancing damper is used to regulate air flow in pipe..
  • BARREL: (B) 6” long, beaded & tapered..
  • ALL DIAMETERS: (A) sized 1/8” under nominal.
  • BODY MATERIAL: Galvanized Metal - 26 gauge.
Check Stock

Oatey 33402 Mechanical Test Plug, 3 in, 5 Psi Back, Plastic, 110 Deg F, 3-Inch, Red

  • End of Pipe Gripper plugs are made with ABS glass-reinforced plates for added strength.
  • Extra large zinc wing nut for ease of tightening, no wrench required, and will not rust.
  • Natural rubber O-ring for excellent expansion and memory.
  • Plug is rated for 17 PSI or 40-ft of head pressure.
  • End-of-pipe seals only at the end of a pipe, preventing plug from falling into stack.
  • Galvanized carriage bolt to prevent corrosion.
  • Galvanized mechanical plugs have a wide usage range making them effective on most piping material.
  • Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized.
  • Plastic mechanical plugs are premium plugs designed to hold higher pressures.
Check Stock

Soler & Palau S&P LT-100 Air Filter Lint Trap

  • EFFICIENT DRYER LINT TRAP: This handy lint trap filters out lint from the clothes dryer to help prevent lint buildup on a clothes dryer booster fan..
  • GALVANIZED STEEL: This air filtering dryer lint trap is composed of an enduring material that does not corrode or rust with time. Its galvanized mesh filter works as a secondary sieve to prevent lint from getting past the dryer and blocking the vent pipe..
  • STRESS-FREE SETUP: Clothes dryer secondary lint trap which is easy to install due to its 4 Inch round duct connector. It features a see through plexiglass screen that can be opened for regular cleaning..
  • VERSATILE USE: These air cleaning units can be widely used in most commercial buildings, residences, and industrial workplaces..
  • RELIABLE AND CONSISTENT: With over 60 years of experience, Soler & Palau’s commendable and steady growth is due to their philosophy of developing air-moving products specifically tailored to their consumer’s needs..
Check Stock

4 Inch Metal Tee Cap - Round Vent Cover - Indoor and Outdoor Pipe Cover - Dryer Vent Cover - Dryer Duct End Cap - 4In Metal End Cap - Metal Plug 4Inch - Round Metal Duct Cap

  • The cap is used at the end of tubing as a cover to fit over pipe fittings.
  • Manufactured from high quality galvanized metal.
  • Easy and fast installation - just push the cap in the pipe.
Check Stock

Vent Systems 4 inch Round Roof Cap Galvanized Metal for All Weather Conditions Top Round Exhaust Cap with Rubber for Perfect Insulation Vent Cover 4 100 mm

  • Metal Round Roof Cap Prevents Odors And Gasses From Invading Rv Living Space.
  • Designed With No Moving Parts Ensuring Longer Product Life-Time.
  • Usable Such As Roof Rain Cap, Roof Vent, Stove Pipe Cap, Air Exhaust. Prevents From Rain And Wind.
  • Made Of High Quality Galvanized Steel With Rubber Around The Pipe For Better Insulation..
  • Easy to use, install, remove and clean. Suits very good with other Vent Systems HVAC products. Great outdoor Home improvement and DIY product..
Check Stock

Generic Metal Storm Collar (16 Inch)

  • QUALITY: This storm collar is designed to cover metal flashings to divert water from running down the sides of the pipe. It is constructed using heavy 26 gauge galvanized steel.: This storm collar is designed to cover metal flashings to divert water from running down the sides of the pipe. It is constructed using heavy 26 gauge galvanized steel..
  • EASY INSTALLATION: This metal storm collar contains an adjustable tab. Simply bend tab over for a quick and secure fit..
  • MULTIPLE SIZES: This item is available in sizes ranging from 3 Inches to 18 Inches in inner diameter.
Check Stock

GenExhaust 1'' Double Shielded Through Wall Steel tubing-Short, (TW4DWS)

  • All internal facing seams are welded all round to reduce the chance of leakage.
  • Slotted mounting plates for the inside wall and a galvanized u-bolt clamp is also supplied with this kit..
  • The pipe can become extremely hot depending on the tubing length, generator size and workload..
  • Provisions must be made to avoid contact with flammable or non-heat resistant materials..
Check Stock

Vent Systems 8" Inch Round Chimney Cap Galvanized Steel for All Weather Conditions Top Round Exhaust Cap with Rubber for Perfect Insulation Roof Vent Cap Vent Cover 8 Inch 200 mm

  • Metal Round Roof Cap Prevents Odors And Gasses From Invading Rv Living Space.
  • Designed With No Moving Parts Ensuring Longer Product Life-Time.
  • Usable Such As Roof Rain Cap, Roof Vent, Stove Pipe Cap, Air Exhaust. Prevents From Rain And Wind.
  • Made Of High Quality Galvanized Steel With Rubber Around The Pipe For Better Insulation..
  • Easy to use, install, remove and clean. Suits very good with other Vent Systems HVAC products. Great outdoor Home improvement and DIY product..
Check Stock

GenExhaust Universal Generator Exhaust System Double Layer Wall Attachment for 1-1/2" ID Steel tubing

  • All internal facing seams are welded all round to reduce the chance of leakage.
  • Slotted mounting plates for the inside wall and a galvanized u-bolt clamp is also supplied with this kit..
  • The pipe can become extremely hot depending on the tubing length, generator size and workload..
  • Provisions must be made to avoid contact with flammable or non-heat resistant materials..
Check Stock

GenExhaust Universal generator exhaust system double layer wall attachment for 1" ID steel flex tubing

  • All internal facing seams are welded all round to reduce the chance of leakage.
  • Slotted mounting plates for the inside wall and a galvanized u-bolt clamp is also supplied with this kit..
  • The pipe can become extremely hot depending on the tubing length, generator size and workload..
  • Provisions must be made to avoid contact with flammable or non-heat resistant materials..
Check Stock