Categories

Best Garage Door Springs

Leafy Garage Door Lubricant - 4oz 2-pack Mineral Based Home Family Earth Friendly

  • Synthetic Aerosolized Penetrate And Rust Inhibitor. Use On Springs, Rollers, Hinges And Locks..
  • Contains No CFC/HCFC Compounds. Withstands Temperatures -65 to +300 F. Formly Known As Tribolube.
  • ProSL was developed for the Garage door industry to ensure that the Springs would never rust. Garage door springs don't wear out.
  • ProSL has been proven to triple the life of garage door cables. ProSL's formula includes extreme pressure additives that keep the individual thread of....
Check Stock

DURA-LIFT Heavy Duty Extension Garage Door Spring 2-Pack (120 lb.)

  • ★Application: The pair of torsion spring winding rods are specifically designed for increasing (winding) and decreasing (unwinding) the tension on residential garage door torsion springs.
  • ★Must have tool: Torsion Spring Winding Rods is the only tool recommended to make torsion spring adjustments to balance the weight of a garage door. Failure to use these rods when replacing or adjusting torsion springs may result in personal injury and property damage.
  • ★Dimensions: Garage door torsion spring winding rod are 0.47inch in outside diameter and 17.7” long. They are designed to industry standard for residential garage door use, fit most residential winding cones.
  • ★Safety first: Steel torsion rods allow you to safely perform torsion spring replacements and adjustments without worrying about keeping the spring tension under control. When adjusting or replacing garage door torsion springs, it is extremely important that these tasks are not attempted with any tools other than these rods.
  • ★If you have any problem, please don't hesitate to contact us, we'll reply within 24 hours.
Check Stock

Prime-Line GD 12233 Left Hand Wind Torsion Replace Broken Garage Door Springs-0.243 inch x 2 inch x 32 inch, Yellow, 32

  • REPLACE BROKEN SPRINGS – Use this Prime-Line Steel Left Hand Wound Torsion Spring to replace broken garage door springs. It includes stationary and winding cones..
  • REQUIRES – The use of 2 winding rods for replacement. When dual spring installations are involved, it is important to correctly install both the left and right wind springs during the same job..
  • SELECTION – Torsion springs provide lifting force for heavy garage doors and must be selected by the spring’s dimensions, rather than the door’s weight. Use the spring selection guide to assure the proper replacement part has been selected..
  • DIMENSIONS – Garage door torsion spring is: 0.243 inch wire size x 2 inch inside dimension x 32 inch length with yellow color code..
  • MOUNTING – Right-hand springs are mounted to left side of center and left hand springs are mounted to the right side of center (inside the garage looking out)..
Check Stock

Garage Door Pro SL Spray Grease Lubricant 9oz One Can Use This lube on Springs Rollers Hinges and Locks

  • Synthetic Aerosolized Penetrate And Rust Inhibitor. Use On Springs, Rollers, Hinges And Locks..
  • Contains No CFC/HCFC Compounds. Withstands Temperatures -65 to +300 F. Formly Known As Tribolube.
  • ProSL was developed for the Garage door industry to ensure that the Springs would never rust. Garage door springs don't wear out.
  • ProSL has been proven to triple the life of garage door cables. ProSL's formula includes extreme pressure additives that keep the individual thread of....
Check Stock

New! Garage Door Extension Springs - Stretch Springs - PAIR - for 7' high door (Green)

  • DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Door (0.262x2x35) (Black/Right - Red/Left).
  • MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
  • EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications..
  • CONE TYPE: Diamond cones, stationary cones..
  • CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check Stock

DURA-LIFT Heavy Duty Extension Garage Door Spring 2-Pack (180 lb.)

  • 180 POUND WEIGHT CAPACITY - two replacement springs for a 180 pound garage door using a sectional garage door extension spring system.
  • DOUBLE LOOPED ENDS FOR STRENGTH - two loops to connect pulley system extend the cycle life of the springs.
  • SIMPLE INSTALLATION - install new or replace old, rusty springs quickly (professional installation recommended).
  • CORROSION RESISTANT - powder coated steel coils to help slow rusting process over spring life.
  • 1-YEAR WARRANTY - springs are warranted for 1 year from purchase date.
Check Stock

DURA-LIFT .207 x 2\ x 23\ Torsion Garage Springs (Yellow, Left & Right Wound)

  • DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Doors (0.295x2x41). (Black/Right).
  • MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
  • EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications.
  • CONE TYPE: Diamond cones, stationary cones..
  • CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check Stock

scottchen PRO Garage Door Safety Cable for Extension Springs Galvanized Carbon Steel 8'8\ x 1/8\ 7x7 Strands - 1Pair

  • DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Door (0.262x2x35) (Black/Right - Red/Left).
  • MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
  • EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications..
  • CONE TYPE: Diamond cones, stationary cones..
  • CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check Stock

P528 28-Inch Plug-End Garage Door Spring (.207 In #5 Wire), Black

  • SPRINGS FOR YOUR ONE-PIECE GARAGE DOOR OR TOY HAULER - P528 springs handle a 105-175lb. door with 2 springs or a 200-350lb. door with 4 springs.
  • SIMPLE INSTALLATION - install new or replace old, rusty springs quickly and by yourself.
  • SAFETY CONTAINMENT ROD - if and when spring breaks, the coils will remain wrapped around middle rod for protection.
  • CORROSION RESISTANT - powder coated steel coils to help slow rusting process over spring life.
  • 1-YEAR WARRANTY - springs are warranted for 1 year from purchase dat.
Check Stock

Pair of 2' Garage Door Torsion Springs Set with Non-Slip Winding Bars & Gloves, High Quality Precision Electrophoresis Black Coated, for Replacement & Installation, MIN 16,000 Cycles (0.218x2''x24'')

  • DIMENSION : One Pair of 218” wire size x 2” inside dimension x 24” length Garage Door Torsion Spring. (left & right).
  • PACKING INCLUDED : A pair of Garage Door Torsion Spring, A pair of 17.2’’ Non-Slip Winding Bars and Gloves, and Installation Instructions are included in the package, so you can start installing immediately after receiving the product..
  • HIGH QUALITY : Made of heat-treated professional spring steel coils with aluminum cones to make sure they are extremely heavy duty. The latest electrophoretic coating technology provide excellent corrosion proof performance and superior abrasion proof performance. Salt spray tests up to 300 Hours, and Minimum 16,000 Cycles. NEVER need to lubricate the spring, keep hands clean during installation..
  • SIMPLE INSTALLATION : Use KaiMinDogz high quality garage door torsion springs to replace old broken garage door springs.Having the experience of installing torsion springs can save you a lot of money..
  • IMPORTANT : Please make sure that the wire diameter, inner diameter, and length of the spring you choose are exactly the same as the original spring used. The extra time should prove beneficial. Over the years we have discovered that informed customers are happier..
Check Stock

Garage Door Extension Springs - Stretch Springs - PAIR - for 7' high door - NEW! (130 # Yellow)

  • Garage Door Extension Springs For 7' High Doors.
  • Extension Springs / Stretch Springs for 7' High Garage Doors.
  • 120 lb. - Green, 130 lb. - Yellow, 140 lb. - Blue.
Check Stock

HOME MASTER HARDWARE 1-3/4\ Nylon Garage Door Rollers with 4\ Stems Zinc Plated 12 Pack

  • Garage Door Extension Springs For 7' High Doors.
  • Extension Springs / Stretch Springs for 7' High Garage Doors.
  • 120 lb. - Green, 130 lb. - Yellow, 140 lb. - Blue.
Check Stock

Garage Door Torsion Springs 2'' (Pair) with Non-Slip Winding Bars,High Quality Coated Torsion Springs with a Minimum of 10,000 Cycles (0.250X2''X30'')

  • REPLACE BROKEN SPRINGS：Use this pair of high quality garage door torsion springs to replace old broken garage door springs. It includes stationary and winding cones..
  • HIGH QUALITY PRODUCT:Made of heat treated steel coils with aluminum cones to make sure they are extremely heavy duty.Surface coated black for smoother, cleaner operation and also corrosion resistant and oil tempered for longer life..
  • SERVICE LIFE:For use on doors 7' or 8' high doors with 4" standard lift drums. Engineered for maximum application range. Minimum 10,000 cycles, at +/- 7.5 lbs of target door weight..
  • EASY TO INSTALL:We also offer a pair of winding bars,they will help install new or replace old, rusty springs quickly (professional installation recommended)..
  • DIMENSION:.250” wire size x 2” inside dimension x 30” length.IMPORTANT:Please purchase after confirming that the outer diameter,wire diameter and length are totally the same as the original product..
Check Stock