2 Wavian 3011 5.3 Gallon 20L Authentic CARB Fuel Jerry Cans with Spout, Yellow

  • EPA and CARB(California Air Resource Board) Approved.
  • This 5 gallon gas can is constructed with a 0.8mm cold rolled steel body and neat welded seal seams, made it durability and reliability..
  • The gas cans for gasoline 5 gallon is only 10.8 lbs when empty, easy to store and convenient to bring to the car for emergency backup fuel.
  • Provide nozzle spout for the gas can with extension spout neck design, easy to pour the fuel..
  • Our fuel can has 3 handles, can easily lift the tank. perfect for the rugged off-road as the emergency backup cans..
Check Stock

KP KOOL PRODUCTS Retail Pack Flexible Replacement Gas Spout with 2 Screw Collar Caps(1 Fine & 1 Coarse - Fits Most Of The Cans), 2 Base Caps, 1 Stopper Cap and 1 Stainless Steel Filter/Flame Arrestor.

  • ... our customers to make their transport safe & comfortable..
  • Includes lot of accessories such as Stainless Steel False arrestor/Filter solid particles and prevent any serious damage. Our Blitz Gas Can Spout Replacement allows the Fuel flows out smoothly without using any over-engineered anti-spill devices. Our 5 Gallon Gas Can Spout is the best way to stop fuel shortcomings..
  • 2 screw collar caps (fine and coarse threads - both collars have an inside dimension of 1 3/4") to use on most of the cans. Please check your container outside thread diameter before you place an order. One of the great ways to transform your old gas cans with a new touch. There's no reason to put away the rusty cans when you have a 5 Gallon Gas Can Nozzle Replacement from Kool Products..
  • For Vent Plug, Please drill a 1/2" Hole Into the Can & Then Push The Vent Into The Hole. This Is The Best Gas Can/Water Jug Spout Kit available in North America. Install this No Spill Gas Can Spout Replacement on your old gallon or gas containers & use it for backup generators when the power goes out or for other vehicles when they are out of the fuel. Our universal gas can spout never allow the single drop of the spill..
Check Stock

Gas Can Spout Replacement 5 gal Easy to Install, Gas Can Nozzle Replacement 5 gallon, Fit for Most 1/2/5/10 Gallon Gas Can(3 kit), Include Gas Can Spouts for Older Gas Cans, Easy Pour Gas Can Spout

  • EASIER TO POUR: the gas can spout replacement universal is very useful. Just install the gas can spout on the gas cans, adjust the angle to pour gas into tank simply and easily, fills/flows much faster than using a funnel into the gas tank, no more spilling.
  • HIGH QUALITY: these gas can spout are made of HDPE plastic(same as 10 5 gallon gas can plastic), which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life.
  • UNIVERSAL FIT: most gas cans 5 gallon plastic are suitable. the inner diameters of the 6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase.
  • EASY TO USE: this gas can spout replacement universal suit contains all you need, simple to install, for 1/2/2.5/5/10 gallon gas can, as long as the bore size is the same.
  • NO MORE HASSLE: lifetime Warranty, if you need help, please feel free to contact us. Rubber gaskets are fragile parts, do not use too much force. FUEL CAN IS NOT INCLUDED IN SALE.
Check Stock

Kool Products Yellow Replacement Spout Kit with Stainless Steel Filter and Vent Plug(3 Pack). This Spout is Rigid and not as Flexible as You Expect.

  • ...it includes: (3) 9.5" yellow spouts, (3) spout cap, (3) "O" ring gasket and filter screen, (6) base caps, (3) push-in vent cap and (3) cords for tying the cap. 3 Kits in each Pack. Our Blitz Gas Can Spout Replacement allows the Fuel flows out smoothly without using any over-engineered anti-spill devices. Our 5 Gallon Gas Can Spout is the best way to stop fuel shortcomings..
  • IMPROVED GASKET: We have recently improved the strength and material of our gasket so that it doesn't break with no leaks or mess of any kind. One of the great ways to transform your old gas cans with a new touch. There's no reason to put away the rusty cans when you have a 5 Gallon Gas Can Nozzle Replacement from Kool Products. This Flexible Gas Can Nozzle also has a smooth flow action manufactured excellently..
  • VENT CAPS: (3) Push-in vent caps are included for quick and safe emptying..
  • CUSTOMER SATISFACTION: KP Kool Products spout kits are very easy to use. Please let us know if you have any issue and we will make sure its taken care right away..
Check Stock

TERA PUMP TRFA01 4-AA Battery Powered Fuel Transfer Pump w/ Flexible Intake hose and No-spill Auto-Stop Nozzle, attachable to gas cans and more

  • [ TRANSFER RATES ] Transfers up to 2.4 Gallons per Minute with Auto-Stop Nozzle - Patented No Leak Design with Built-in Auto-Stop Nozzle stops pump automatically when container is full & warns with a boisterous beep that Pump has automatically has stopped. Nozzle is is equipped with a locking clip to secure nozzle onto receiving receptacles for a hands-free experience.
  • [ RECOMMENDED ] Suitable for Gasoline, diesel, kerosene, light oils & non-potable water- Discharge Hose of 39-inch ( 3.25ft ) for refueling for farther distances - Discharge Hose Holder: Built-in nozzle holder for safe and convenient way of storing the discharge nozzle | Three (3) Gas Can Adapters includes, Fits most North American gas cans.
  • [ FLEXIBLE SUCTION TUBE ] Suction Tube length of about 18-inch, Fits 3-Gallon (~11.4-Liters) Gas Cans, 5-Gallon (~19-Liters) Gas Can & up to Jerry Cans - Suction end Outer Diameter: 1.2-inch - Back Saving: Lifting heavy gas cans will be a thing of the past.
  • [ BATTERY POWERED ] Powered with Four (AA) Batteries, Sold Separately or in Emergency situations operate with Two (AA) batteries during emergencies - Water-Resistant power buttons protects against accidental splashes - Works great with farm equipment, Industrial Vehicles and in Automotive Shops.
Check Stock

KP KOOL PRODUCTS Gas Can Cap - Solid Base Gas can Cap Replacement (1-Coarse and 1-Fine Thread) - Fits Most 1/2/3/5 Gallon Gas can - caps are 1-3/4\. Please Check Your can Dimensions Before You Buy

  • These Caps Will Fit Most of The Cans. The inside diameter of both the caps are 1-3/4"inch. Please check the dimensions and buy accordingly. This gas caps for gas cans will not fit if your cans have different size opening.
  • It Contains 1 Black (Fine Thread) and 1 Yellow (Coarse Thread) which fits most 1/2/5/10 gallon gas cans, gas can cap spout replacement old style. NO CALIPER INCLUDED.
  • Gas can cap gasket: using high-quality materials, wider and thicker gas can cap seal, better fit the cap, gas can cap no spill, can effectively prevent the liquid from overflowing in the process of transportation..
  • This gas can caps Are Made of Very Fine Quality BPA Free Plastic And Will Hold Up To Years of Activity..
  • KOOL PRODUCTS Spout Kits and Caps are very Popular and Number One Seller in North America..
  • KOOL PRODUCTS Replacement Solid Base Cap Yellow and Black to Update Your Old Cans.
Check Stock

CM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package

  • Gas Can Spout Replacement kit,Suitable for most 1/2/5/10 gallon oil cans, We provide 12 threaded collar caps 6 Coarse Thread & 6 Fine Thread . As shown in the picture The internal thread size is 1-3/4--1.7in , It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
Check Stock

TERAPUMP TRFA01 Fuel Pump

  • Designed to fit all Racing Fuel Cans with the included 4 adapters / Does Not Fit FMD Style Cans.
  • Up to 2.4 Gallon (8.9 Liters) per Minute with 4AA Batteries (Not Included).
  • Simple Water-Resistant Switch: Switch on to start pump, Utilizes 4 AA Batteries (Not Included).
  • Compatible with Racing Fuels, Gasoline, Diesel, Water(not for drinking), Kerosene & Light Oils.
  • Easy Auto Stop Handle: Easy to hold pump style handle, Clips on gas cans to alleviate spills and messy clean up with 51 inch Hose.
Check Stock

Eagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gallon oil cans, We provide 6 threaded collar caps 3 Coarse Thread & 3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,4 Each set of products....
Check Stock

ESKONI Hand Crank Aluminum Rotary Gas Oil Fuel Hand Pump 10 Gpm Self Priming Dispenser

  • [ TRANSFER RATES ] Transfers up to 2.4 Gallons per Minute with Flow Control Nozzle. Control the flow by squeezing the nozzle lever, Lower Level Tigger Position is great for refueling gas, diesel and more & Upper lever trigger position is great for watering sessions. Nozzle can also be locked for longer watering or fueling sessions.
  • [ RECOMMENDED ] Suitable for Gasoline, diesel, DEF (AdBlue), non-potable water, kerosene, antifreeze, windshield washer fluid, mild detergents, agricultural chemicals & light oils - Discharge Hose of 120-inch ( 10ft ) for refueling for farther distances - Discharge Hose Holder: Built-in nozzle holder for safe and convenient way of storing the discharge nozzle.
  • [ TELESCOPIC TUBE ] Suction Tube length of about 15-inch to 20-inch, Fits 3-Gallon (~11.4-Liters) Gas Cans, 5-Gallon (~19-Liters) Gas Can, to 5-Gallon Pails & up to 20-Gallon Drum Barrels - Suction end Outer Diameter: 1.2-inch - Swivel Nut Nozzle prevents hose from tangling with 360 degree rotation.
  • [ BATTERY POWERED ] Powered with Two (D) Battery Powered, Sold Separately - Big Slide Switch: Big On/Off Switch - Works great with farm equipment, Industrial Vehicles and in Automotive Shops - U-Shaped battery compartment: U-shaped hook for easier storage.
Check Stock

KP KOOL PRODUCTS Gas Can Spout Replacement with Extension Spout - Gas can Nozzle - Gas can Vent kit & Gasket Filters - Used for Old 5 Gallon Gas can spout - Blitz - Midwest - Scepter and Other Brands

  • ...8 replacement vent caps. The spout kits, and vent cap are equipped with rubber band, play an epic role in sealing and adjust the angle to put Gas into tank conveniently. It is enable to prevent liquid leakage and transport or store fuel well..
  • HIGH QUALITY: these gas can spout are made of HDPE plastic(same as 10 5 gallon gas can plastic), which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life,Safe without leakage.
  • With the replaceable vent caps, the spout kits aslo works for covering more oil cans. The package includes two oil cans with vent caps,( gas can vent caps-A is applicable to oil cans without a vent at the end of the oil can, you just need a simple drilling and installation when you are ready to use. The vent caps-B is applicable to another oil can with a vent cap at the tail .).
  • Please remember put the rubber gast under the gas can spout kit cap to avoid the gas leakage .QJIUBA Gas Can Spout helps get rid of inconveniences while travelling. The universal Gas Can Spout is aim to help others while driving.
Check Stock

TERA PUMP Multipurpose Electric Powered, 110V AC/DC Plug-in & 12V DC Powered Water Fuel Liquid Transfer Pump w/Nozzle Filter Attachment & Quick Stop Flow Control Trigger (8.2 feet Discharge Hose)

  • [ TRANSFER RATES ] Transfers up to 2.8 Gallons per Minute with Flow Control Nozzle. Control the flow by squeezing the nozzle lever, Lower Level Tigger Position is great for refueling gas, diesel and more & Upper lever trigger position is great for watering sessions. Nozzle can also be locked for longer watering or fueling sessions.
  • [ RECOMMENDED ] Suitable for Gasoline, diesel, DEF (AdBlue), non-potable water, kerosene, antifreeze, windshield washer fluid, mild detergents, agricultural chemicals & light oils- Discharge Hose of 96-inch ( 8ft ) for refueling for farther distances - Discharge Hose Holder: Built-in nozzle holder for safe and convenient way of storing the discharge nozzle.
  • [ XL Suction TUBE ] Suction Tube length of about 17.6-inch, Fits 3-Gallon (~11.4-Liters) Gas Cans, 5-Gallon (~19-Liters) Gas Can, to 5-Gallon Pails & up to Racing Cans- Suction end Outer Diameter: 1.2-inch - Swivel Nut Nozzle prevents hose from tangling with 360 degree rotation - Includes Shower Head & Suction Tube Filter: Prevents unwanted debris from entering the Suction Tube.
  • [ ELECTRIC POWERED ] Powered with 12V DC Adapter ....
Check Stock

Replacement Gas Can Spouts Improved Design Gasket Flexible Pour Nozzle with Vent Cap for Older Gas Can Fuel Water Jug 1 2 5 Gallon White

  • Fuel can spouts are made of high strength ABS plastic, improved gasket more durable and no leak.
  • Flexible nozzle can be bent to adjust various angles make gas/water easily flows out without the need for other devices and no more spilling.
  • Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss.
  • Compatible with Most of gas cans and 1/2/5/10 gallon: Universal gas can spout kit comes with two different collar screw cap, fine thread and coarse thread collar cap ,fit most of the cans.
  • Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) "O" ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent cap,(1)drill bit. 3 Kits included.
Check Stock