Categories

Best Gas Ball Vavle

14L Autoclave Steam Sterilizer Medical Sterilization Lab Beauty Equipment AC110V 3 Trays with Drying Fuction

  • 1. Sterilizer component: pressure guage, rotary handle, indicator lamp, timer knob, exhaust drain needle vavle, steam outlet and safety vavle.And the overall material is 304 stainless steel, Durable and clean..
  • 2. Equipped with: three trays and shelves, convenient for you to store appliances separately, fully sterilize and maintain hygiene..
  • 3. Function: The temperature can reach 121 degrees Celsius when in use, autoclave sterilization, and the sterilization time is 25 minutes..
  • 4. Widely used: stomatological and ophthalmologic hospital, pet clinic, pedicure salon, beauty salon, babershop and tattoo shop, etc..
  • 5. Note: Similar steam sterilization cabinets do not have a drying function. Please do not add packaging bags to the instruments to avoid water vapor..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

Fuel Vavle Petcock Shut off Tank Switch Fits For Honda TRX 250EX 350 400 420 Rancher TRX400 450 500 Foreman Recon 250 Rubicon 500 650 OEM# 16950-HM8-003 Fuel Tank Petcock Valve Assembly

  • 【Vehicle Fitment】This Fuel Vavle Petcock Fits For Honda Rancher 350 400 420 Foreman 500 Rubicon 500 Rincon 650 Foreman 400 450 500 Sportstrax 250 Recon 250 Fourtrax 250 2000 2001 2002 2003 2004 2005 2006 2007 TRX 350 Rancher 2004-2007 TRX 400 Rancher 2007 2008 2009 2010 2011 2012 2013 2014 Honda TRX 420 Rancher four-wheelers ES S FE FM TE.
  • 【Replaces OEM #】OEM # 16950-HM8-003 # 16950-HN7-003 # 16950-HP5-601.
  • 【Original Standard】Products manufactured in strict compliance with OEM standards, rugged, durable and easy to install. 100% brand new and durable petcock made by Vavle Expert, guarantees high performance, excellent air tightness, better fuel flow rates and longer working life..
  • 【Package Info】 1 x fuel valve, 2 x mounting screws, 1 x meter fuel line, 1 x fuel filter, 2 x Spring Clips. Free gifts including high quality pure rubber fuel line and fuel filter!.
  • 【Guarantee】Hassle-Free Return and Money Back, Shop with Confidence. All parts are strictly tested and quality controlled prior to shipment. Even so, we provide life time warranty and full refund for any quality issue..
Check Stock

MRbrew Efficient Adjustable Beer Faucet Kit, Adjust/Control/Regulate Beer Flow Rate, Heavy Duty Commercial Brewing Kegging Stainless Core Adjustable Draft Kegerator Keg Tap Kit for Beer Tower Shanks

  • 1.Include: Beer Keg CO2 Regulator CGA320, Red Gas Line, Worm Clamps, 5/16" Swivel Nuts, Ball Lock Gas Disconnect MFL.
  • 2.Material: PVC Material for Gas Line, Stainless Steel Material for Clamps, CO2 Regulator and Swivel Nuts, Plastic Material for Ball Lock Disconnect.
  • Connect tips: Tighten the Clamps when it Connects the Beer Gas Line will guarantee no Leak.
  • 4.Gas Gauge: 0-60 PSI and 0-3000 PSI, Manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator.
  • 5.Guarantee: Quality Guarantee, any problem for CO2 Regulator with ball lock and gas line set, Money Back or Replacement free..
Check Stock

2 Truck Upfitters 16' Gas Props (15.7' ext, 9.4' Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!

  • CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation..
  • Truck Upfitters Pair of 55 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys..
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must....
Check Stock

Philips 458471 Hue Smart Bridge (Compatible with Amazon Alexa, Apple HomeKit and Google Assistant), White Ambiance

  • A Smart Add-on for your Existing Water or Gas Ball Valve - Simply add this smart valve controller to your water valve or gas shutoff valve, you can simple control the water supply or turn off gas valve from anywhere at any time with your smartphone, using free Smart Life app..
  • Compatible with Amazon Alexa and Google Home - When paired with the Amazon Alexa or Google Assistant, the smart shut off valve gives you hands - free voice control over your home..
  • Wide Application - The smart shut off valve is compatible with water pipe ball valves, electric/ manual control switches, and natural/ liquid/ tap gas valve. Enjoy home automation like automatic irrigation of garden, farmland.
  • timing water supply for feeding farm, stockyards.
  • remote control the gas valve when you are leaving home in haste..
  • Easy Installation - Just need screw to fix over your existing levered ball valve, no addition plumbing required. With specially designed metal clamping ring, it is adjustable to compatible with most widely used pipe size like 1/2.
Check Stock

Engine Valve Cover with Gaskets, Bolts & Oil Filler Cap Compatible with 2011-2020 Chevy Cruze Sonic Trax Volt | Cadillac ELR | Buick Encore 1.4L Turbo Replace# 55573746 25198498 264-968 25198874

  • ✅【COMPLETE SOLUTION】This valve cover kit comes with 1 * new Valve Cover, 1 * new Oil Filler Cap , 1 * new Valve Cover Gasket and new Bolts. The pcv valve is pre-installed on the valve cover. This valve cover kit is a complete solution for your replacement..
  • ✅【TWO YEARS WARRANTY】 This vavle cover kit has undergone a rigorous end-of-line testing for reliability So we offter TWO Years Warranty. If you're not 100% satisfied with our products, simply return it for a full refund in 30 days. Any questions please feel free to contact us..
Check Stock

PERA 5/16" ball lock line assembly, MFL liquid disconnect with 5ft gas line for home brewing

  • INCLUDES: MFL ball lock disconnect, 2 pcs swivel nut, 2 pcs hose clamp, 5ft ID 5/16″ OD 9/16″ gas line.
  • PRE-ASSEMBLED, can connect gas regulator directly once you get the ball lock gas line.
  • NO LEAK, with two pcs hose clamp, will have no gas leak problem.
  • MULTI-USAGE, carbonated seltzer water, home brew, different beverage, outdoor picnics, keg cleaning.
  • WORK WITH ALL STANDARD REGULATOR, with swivel nut, connect MFL regulators, Remove swivel nut for barb regulators.
Check Stock

FARZI USB ion Ball electrostatic Magic Ball Magic lamp Lightening Ball

  • USB power supply, its shell is high-strength glass shell, the ball is filled with thin inert gas, and the center of the glass ball has a black spherical electrode. After power-on, the arc formed by the electrode and the inert gas excited by high pressure generates a beam of light, so the generated light is like some radial glow, with bright colors and large radiation, which is very beautiful in the dark..
  • When the hand touches the ball (people are connected to the ground), the electric field and potential distribution around the ball are no longer uniform and symmetrical, therefore, the glow becomes brighter around the fingers, the resulting arc moves and twists along the touch of the hand, Dancing with the fingers..
  • Power mode: USB cable plug-in/4 AAA batteries, battery not delivered,.
  • Unique decorative effect: This large plasma ball is the perfect way to decorate bedroom, living room, office, car or other places..
Check Stock

Keg Kit with 5 Gallon Ball Lock Keg, 5 lb Aluminum CO2 Cylinder, Regulator, and All Accessories

  • Unique Long 15 Feet Tubing for Multiple Keg Dispensing: compared to other brewing hose kits, MRbrew co2 gas dispensing hose features a great length of 15 feet, you can apply this hose to your sankey keg tap system and cornelius ball lock kegging system simultaneously by cutting this 15 feet hose, this pretty long homebrew gas line can be cut into multiple sections to meet your mutiple kegging needs perfectly..
  • Can be Easily Cut by Cutting Tool: the short length brewing hose kit can not be cut and it can not be applied to your multiple keg dispensing process simultaneously, or the fixed hose fitting kit comes with extra fittings and you need to spend extra money, this 15 feet gas line can be cut into any length to meet your needs, you can can equip it with your own brewing dispensing parts, brings great convenience and creative possibilities for your multi-kegging brewing dispensing system..
  • Powerful No Leaking Pressure Transferring Tubing: the inside diameter of this great long kegging dispensing hose is 7mm, thick enough hose wall prevents the gas tubing kinks and maintains hose shape stability, smoothly transmit gas without leakage with the help of hose clamps. you can attach this kegerator hose to the beer barb fitting connector that has an outside ....
Check Stock

PERA Cornelius Keg quick Disconnect Ball Lock Liquid Disconnect Ball Lock Gas Disconnect MFL for Homebrewing Beer Keg Kegging System

  • 1. Include: 1/4" MFL Ball Lock Quick Gas&Beer Disconnects Set (3 Pair).
  • 2. Material: Premium ABS for Ball Lock Quick Disconnect Set, Food Grade.
  • 3. The black one connects to the liquid-out post on any Ball Lock home brew keg.
  • The gray one connects to the CO2 gas-in post on any Ball Lock home brew keg.
  • 4. Widely Use: Fits for most Cornelius Kegs, for Corny kegs, for Pepsi Keg, for 7-UP Tanks, great for home made craft cocktails, soda, and other beverages..
  • 5. Quality Guarantee: Any Problem for the Keg Quick Disconnects,Money Back or Replacement Guarantee..
Check Stock

20 inch 200 LB Gas Prop Struts Shocks 20 Heavy Duty Gas Springs for Murphy Bed RV Camper Bed Floor Hatch Trap Door Large Shed Window Support Lid Weight 170-220lbs

  • ✅ Qty (2) 20 Inch 200 lb Gas Struts --Extended Length: 19.7"(500mm), Compressed Length: 11.8"(300mm), Package include: 2× Shocks, 4× Ball Studs,....
  • ✅20" 200 lb Gas Shocks --Most suitable support weight is between 170 pounds and 220 pounds, if out of this range, we suggest you buy other-pressure....
  • ✅ 200lb Heavy Duty Gas Spring -- Super strong gas shocks can be used on heavy duty RV/Murphy Bed, trailer cap, tonneau cover, sled trailer, large....
  • ✅20 inch 200 Pound Gas Springs -- NOTE: Pack of 2pcs, the whole length from tip to tip is 21inches.
  • 200lbs Per Shock -- couldn't be installed on....
  • ✅20 inch 200LB Lift Supports -- NO MOUNTIGN BRACKETS, if you need please search "B08MWLPYD8" or "B07SFH58QR" for corresponding ball stud brackets!....
Check Stock

FERRODAY Ball Lock Keg Disconnect Quick Ball Lock MFL Disconnect Flared 5/16” Gas 1/4” Liquid Barbed Stainless Swivel Nuts for Corny Keg Post Ball Lock Keg Fittings for Homebrew with Clamps

  • 【Ball Lock Disconnects for Beer Keg】 Barbed beer keg ball lock disconnect fittings with MFL swivel nuts for beer kegs connecting with other....
  • 【1/4" and 5/16" Barbs Already Included】 Complete ball lock keg disconnect fitting comes with 5/16” barb for white disconnect to connecting gas....
  • 【Long-Lasting Useful Keg Disconnect】 Classic ball lock keg fittings of safe materials, Strong ABS for main body, stainless steel for swivel nuts,....
  • 【Universal Ball Lock Quick Disconnect】 For most ball lock home brew Kegs. Gray disconnect for gas post, black disconnect for liquid post. Perfect....
  • 【No Leaks & No Regrets Purchase】 We have tested hundreds of times and no leaks! We are committed to offer you with high quality product as well as....
Check Stock