Categories

Best Gas Cylinder Tube

20 lb CO2 Tank New Aluminum CGA320 with SIPHON TUBE by Beverage Elements

  • 20 Lb. Co2 Aluminum Cylinder With CGA 320 Valve, Carry Handle, And Dip Tube.
  • (We also carry a complete line of compressed gas cylinders valves and parts).
  • 8.0 inch diameter, 28.2 inch length, 1.125″ UNF inlet thread..
  • Cylinder with valve, Shipped Empty,Do Not tilt it or lay it on its side..
Check Stock

BLUEFIRE MRS-7014B Trigger Start Gas Welding Torch Head for Propane & MAP PRO Fuel,Extend 1.5' Burning Tube Nozzle Piezo Self Ignition Handhold Cylinder Soldering Brazing Triple-Point Flame

  • OPTIMIZE FOR PROPANE: This torch is specially designed to use on Standard Propane and MAP PRO (Propylene), if you are using Bluefire MAPP, please DO NOT choose this one, switch to the MAPP Torch Special Version listed in the same page, which is optimized for Bluefire MAPP Gas.
  • CAUTION: Tipping the gas cylinder to more than 60 degrees from its upright position may cause the torch to flare. It is recommended to start working with a disposable handheld cylinder at room temperature and to keep the torch upright as much as possible.
  • EASY & SOLID: Trigger Start Ignition for instant 1-click flame light up, upgraded version igniter for improved ignition rate, perfect work with Propane, MAPP, MAP-PRO. Adjustable flame knob for control flame size. Solid Brass constructed regulator valve for durability, threading fits CGA600 US standard fuel gas cylinder.
  • LONGER TUBE: 1.5" Extended version of Stainless steel Burner, adds more reliability and safety. Strong and Stable Triple-Point Flame Structure for precision soldering/brazing.
  • ALL-PURPOSE: Suitable for soldering copper pipes up to 3/4″, Soldering electronic circuits, Thawing frozen pipes and locks, Loosening rusted nuts and bolts. You can even use it for cooking and camping..
Check Stock

Drywall Compound Tube - LEVEL5 MINISHOT | Gas Strut Assisted | Corner Finishing | 4-722

  • The first gas-charged compound applicator tube that is push nozzle activated. Dramatically increases efficiency while being easier on your shoulders, back and wrists than any other corner applicator boxes or compound tubes. The MudShot is an instant money maker!.
  • A strong 82lb gas cylinder allows for a wider range of mud thicknesses while still being easy to fill. A high capacity mud chamber means fewer trips back to the pump..
  • High gauge but lightweight aluminum handle tube that has been hard-coat anodized for extreme durability and easy cleaning. Rubber handle sleeve for added comfort. Precision machined female connection for adding optional handle extensions..
  • BONUS - For a limited time, each MudShot is shipped with a free 18” handle extension ($75 value)..
  • GUARANTEED TOUGH | DEWALT automatic drywall tools are proudly backed by our 10-year limited warranty..
Check Stock

BLUEFIRE BTS-8090 Auto ON/OFF Trigger Start Heavy Duty Gas Welding Torch Head Adjustable Swirl Flame Hand Hold Portable Fuel by MAPP/MAP Pro/Propane 1lb Bottle Tank (Torch Kit with MAPP Cylinder)

  • 【Stable performance】Flow control knob near the handle to adjust the gas of the propane torch head.Pressure regulation allow the flame to burn in any direction, ensure stable performance..
  • 【Easy to use】Trigger start auto Igniter for instant 1-click.3.6Ft mapp gas torch hose comes with a cylinder hook, you can hold the propane torch head in tight places for a long time..
  • 【Multipurpose use】Our propane torch head fule by Propane, MAPP, MAP-PRO cylinder with CGA600 interface.A multi-purpose Mapp gas torch for large diameter soldering pipe,HVAC, welding, brazing, heat shrinkage, snow melting, burning steak, etc.
  • 【Premium material】 High intensity swirl flame,temperature up to 3600℉.Solid brass valve and stainless steel burner tube of Mapp gas torch, for long-term use..
  • 【We are always here】If you are looking for a torch head with hose,choose us.30-Day full refund and 1-Year Limited Service for you..
Check Stock

Gas Lift Hydraulic/Pneumatic Piston for Office Chair Gas Lift Cylinder Replacement Parts,Universal Size Fits Most Executive Chairs,Includes Removal Tool,Gloves,Gas Cylinder(Black)

  • 【HIGH QUALITY】Durable,and the best quality gas lift cylinder, withstand higher weight and pressure, high safety and explosion-proof. The gas lift cylinder has passed SGS official test and BIFMA certification, and is made of high-quality thickened outer steel to ensure compliance with quality standards..
  • 【WITH COMPLETE REMOVEL TOOLS】Package come with one gas lift cylinder, removal tools --2 shafts(28mm/1.1" dia.), 2 bolts, 1 L wrench and a pair of gloves. You can installed easily without additional screws required, fix your sinking office chair by this standard size replacement chair piston instead of purchasing a new chair..
  • 【UNIVERSAL SIZE THAT FITS MOST CHAIRS】This chair cylinder replacement will fit all office chair bases standard centre hole. Ideal to replace gas lift cylinder on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. It has a better load-bearing capacity. This office chair piston maximum weight it supports is 1000Lbs, which can support much heavier than ordinary gas cylinder for office chair..
  • 【SAVE MONEY】Spending 5 minutes will bring a new life to your old office chair. Fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a b....
Check Stock

Sadlak Industries M14 Aluminum Scope Mount

  • The aluminum edition is machined from CNC from a density of ½ aircraft quality aluminum (6061), treated using heat. The material which is denser as....
  • Extra Big Wrench For gas cylinders created abroad, we provide an edition which is extra big, just in an aluminum thickness of ½ and olive drab color..
  • Drill Set for Cleaning The drill set for cleaning consists of drill 180 dia No. 15 and .323 dia Letter ‘P’ for rubbing off carbon deposits from....
  • Plug Cleaning Drill for Gas Cylinder (Dia .316 Letter ‘O’ Drill) Following extraction of the gas plug by utilizing Gas Cylinder Wrench from Sadlak....
Check Stock

HOSALI Office Chair Cylinder Replacement,Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston, Universal Size

  • UNIVERSAL SIZE THAT FITS MOST CHAIRS: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace gas lift cylinder on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - ANTI-EXPLOSION CYLINDER: Our office chair piston passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail, they built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than other gas lift cylinder you ever use..
  • 5.5’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 285mm to 425mm ( 11.22 - 16.7"), minimum length: 11.22 inches.
  • maximum length when fully extended: 16.7 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair smoot....
Check Stock

BLUEFIRE MRS-7014A Trigger Start Gas Welding Propane Torch Head Specially for MAPP Fuel,Extend 1.5\ Burning Tube Nozzle Piezo Self Ignition Handhold Cylinder Soldering Brazing Triple-Point Flame

  • OPTIMIZE FOR MAPP: This torch is specially designed to use on Bluefire MAPP, if you are using Standard Propane and MAP PRO (Propylene), please DO NOT choose this one, switch to the Propane Torch Special Version listed in the same page, which is optimized for Standard Propane and MAP PRO (Propylene).
  • CAUTION: Tipping the gas cylinder to more than 60 degrees from its upright position may cause the torch to flare. It is recommended to start working with a disposable handheld cylinder at room temperature and to keep the torch upright as much as possible.
  • EASY & SOLID: Trigger Start Ignition for instant 1-click flame light up, upgraded version igniter for improved ignition rate, perfect work with Propane, MAPP, MAP-PRO. Adjustable flame knob for control flame size. Solid Brass constructed regulator valve for durability, threading fits CGA600 US standard fuel gas cylinder.
  • LONGER TUBE: 1.5" Extended version of Stainless steel Burner, adds more reliability and safety. Strong and Stable Triple-Point Flame Structure for precision soldering/brazing.
  • ALL-PURPOSE: Suitable for soldering copper pipes up to 3/4″, Soldering electronic circuits, Thawing frozen pipes and locks, Loosening rusted nuts and bolts. You can even use it for cooking and camping..
Check Stock

Office Chair Gas Lift Cylinder-Office Chair Replacement Parts, Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston,Universal Size

  • STANDARD SIZE OFFICE CHAIR CYLINDERS REPLACeMENT: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace hydraulic piston on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the chair gas cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - STRONGEST ON THE MARKET: Our gas lift cylinder passed the top-level test of BIFMA and TUV certification, the highest End Class 4 chair piston on market, which are known as the most durable, longest lasting, and highest quality gas lift cylinders, they can lift up and down 120,000 times without fail and can be support up to 1000lbs..
  • 4.7’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 264mm to 385mm ( 10.39 - 15.15"), minimum length: 10.39 inches.
  • maximum length when fully extended: 15.15 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair....
Check Stock

DAJAVE 2 Pack 5.5 Inch Office Chair Cylinder Replacement, Office Chair Gas Lift Cylinder, Hydraulic Pneumatic Shock Piston Heavy Duty(1000lbs) Universal Size Fits Most Executive Chairs

  • [2Pcs Gas Lift Cylinders] You will get 2 office chair cylinder replacement to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a new computer chair.
  • This hydraulic piston is suitable for almost all office chairs (salon chairs, work chairs, executive chairs, rolling stools)..
  • [1000lbs Office Chair Cylinder] The office chair piston maximum weight it supports is 1000Lbs, which is much heavier than an ordinary gas cylinder for office chair..
  • [11.8" to 17.4" Long Adjustable Gas Lift Cylinder] Minimum length: 11.8 inches.
  • maximum length when fully extended: 17.4 inches.
  • adjustable range: 5.5 inches, Load capacity: 1000lbs.
  • Office Chair Cylinder Replacement: Full 360 degree rotation, smooth and noiseless movements to all directions. You can use this chair cylinder replacement for your office chair, gaming chair, desk chair and swivel chair etc..
  • Easy To install: This office chair cylinder is relatively simple to install,and can be installed easily with no additional screws required..
Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hond-a Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

  • Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
  • Application Vehicle: 2008 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • Application Vehicle: 2006 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hond-a engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....
Check Stock

Searon Digital Tach Hour Meter Tachometer RPM Counter for Snowmobile Skis Motor Bike Go Kart Lawn Mower

  • Inductive Tach/Hour Meter -- This digital Tach Hour Meter Tachometer will keep track of engine RPMs and running time for RC Toys, PWC, ATV, Motorcycles, Marine Engines, Chain Saws, Tractors, Lawnmowers and Gas Powered Engines..
  • Read RPM -- Read RPM when engine is started. When engine is off, display total run time of engine and remains visible.
  • Accumulate Total Hours -- Accumulate Non-resettable total run time of operation, Total time reads up to 999,99 Hours.
  • Works With -- 4 Stroke 1 Cylinder / 4 Stroke 2 Cylinder / 4 Stroke 4 Cylinder / 4 Stroke 6 Cylinder / 4 Stroke 8 Cylinder / 4 Stroke 12 Cylinder / 4 Stroke 16 Cylinder / 2 Stroke 1 Cylinder / 2 Stroke 2 Cylinder / 2 Stroke 3 Cylinder / 2 Stroke 4 Cylinder/ 2 Stroke 6 Cylinder Gas Powered Engines.
  • 2-Year Warranty -- Searon warrants that for a period of 2 YEARS from time of purchase. within 2 years, any issue with this Generator hour meter Tachometer Inductive, it will be full refund without return, as long as you contact us timely..
Check Stock

Texinpress Carbon Dioxide Gas Column Gun Bar RGB Co2 Jet Machine Effect Smoke Fog Machine Handheld 3 Colors LED Party Gun for Nightclub Stage Gun Shoot Distance 6-8M Christmas

  • Texinpress carbon dioxide gas column gun uses LED light emitting tube which can make the gun barrel changing to 3 colors from red, green and blue..
  • There is a built-in rechargeable lithium battery. It can continuous use for half an hour after fully charged（Depends on your gas capacity)..
  • It is very simple to operate as a smoke fog machine, it equipped with a 3m length soft tube to connect with the gun and CO2 cylinder..
  • This co2 jet machine can create strong smoke and fog jet effects, which can spray up to 6-8 meters..
  • This LED CO2 gun can be used in all kinds of different occasions like party, nightclub, music concert, stage. If you have any problem please contact....
Check Stock