Best Gas Dryer Connection Kit

Grehitk Flexible Gas Line Connector for Dryer(3/4 24inch), Gas Hose Connector Kit for Stove, Water Heater, Gas Log, Pipe Diameter 1 in. OD(3/4 in. ID), Connector Size 3/4" FIP.3/4"MIP, Stainless Steel

...or hose, flexible gas hose supply gas line connector adapter:2 pack 3/4 Inch FIP, 2 pack 3/4 Inch MIP(Tapped 3/8In FIP ), and 1set threaded tape..
HIGHLY DURABLE- High quality corrugated stainless steel gas hose with multiple types of threaded joints to create a safe metal connection.Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
It has good air tightness, durability, rust and corrosion resistance..
COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..
EASY TO INSTALL- Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more than 2 minutes. Note: The one side of joint connected to the yellow corrugated pipe cannot be wrapped with raw tape! Otherwise it will cause air leakage!But the other side of the joint should be wrapped..
GUARANTEE AND SERVICE- Safe use is always the first goal of the p....

Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

... 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appliance or at another location. Test for leaks only with leak test solution. Rinse with clean water after leak testing..

Check Stock

Beaquicy TDIDVKZW Indoor Dryer Vent Kit with 4 Inch by 10 Feet Flexible Clothes Dryer Duct

✅【CHOICE NOT TO BE MISSED】--- The TDIDVKZW Indoor Dryer Vent Kit is for venting electric dryers indoors to trap lint. Due to potentially harmful fu.mes and exhaust gas.es, this item is not recommended for use in gas dryers. Duct has a 4-in diameter and extends to 10-ft in length. The package includes 1 x 4-inch by 10-feet proflex dryer transition duct,1 x plastic lint reservoir, 2 x plastic adjustable clamps. It includes Installation ring so it can be hung close to a dryer on a wall or wall stud..
✅【USER FRIENDLY】---TDIDVKZW Indoor Dryer Vent Kit is for venting electric dryers indoors to trap lint. It is made of quality materials to prevent crushing or other possible damage to the kit. The pipes are flexible and soft, and can be installed quickly and easily, and it can be used when it is connected to the clothes machine. The indoor dryer vent kit is detachable and can be reused after cleaning. Ideal for apartments, condominiums and R.V.s but should not be used with gas clothes dryers..
✅【MADE OF DURABLE MATERIAL】 --- This TDIDVKZW Indoor Dryer Vent Kit is made from durable high quality material to prevent crushing or other possible damage to the kit. Well-tested by the manufacturer, non OEM but quality equal to OEM requirements. High ....

Check Stock

383EEL3002D Dryer LP Gas Conversion Kit Replacement Part for LG Kenmore Dryer by Rayhoor- Replaces 383EEL3002D, B00AMF8ETW

【Perfect Replacement】Our 383EEL3002D Dryer LP Gas Conversion Kit replaces part numbers: 1617105, AH3522300, AP5204371, EA3522300, PS3522300, LP11835..
【Widely Applicable】Compatible with most top name brand dryers: LG, Kenmore, Kenmore Elite and others.
Fits these models: DLGX5102V, DLGX5102W, RN1317AS, DLG3181W, RN1317TS, 79679002000, 79671553610, DLGX9501K, 79691393610, etc..
【Function】383EEL3002D Dryer LP Conversion Kit converts a natural gas dryer to operate on liquid propane, and the LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer..
【Premium Quality】High quality material and well-tested by the manufacturer designed to fit your dryer perfectly..
【Money-Back Guarantee】If there is anything you are not satisfied, please feel free to contact us and we will offer you a replacement or full refund. High-quality products and service is our priority..

Check Stock

Side Vent Kit 3911EZ9131X for LG Dryer, Venting Kit Assembly 383EEL9001B Compatible with Kenmore/sears, Replacement Part AP4438852 Exhaust Out Either Side or Bottom

✔ [Compatible with Most Models] This dryer side vent kit number 3911EZ9131X (also called 383EEL9001B) compatible with 408 models of LG dryer, and 144 models of Ken-more / Sears dryer. Please refer to Figure 3 for specific models. For use with LG gas dryer model numbers beginning with the prefixes (CDE, CDG, DLA, DLE, DLEX, DLEY, DLG, DLGX, DLGY). For use with Ken-more / Sears gas dryer model numbers beginning with the prefixes (796.61, 796.69, 796.71, 796.79, 796.80, 796.81, 796.82, 796.88, 796.90, 796.91, 796.92, 796.98). There are so many matching models that you must make sure that your dryer model matches this one before purchasing. This is very important important important..
✔ [Venting Kit Assembly Included] : 2 X Straight Tubes, 1 X 90 Degree Elbow, 1 X Cover Plate, 1X Mounting Screw, 1 X Instruction Sheet, 1 X Adhesive Aluminum Foil Tape. Solving the problem that gas dryers cannot be vented on the right left and bottom side. .
✔ [Simple Install by Yourself] This dryer venting kit installation is so simple. You can replace it by yourself with simple tools and have a perfect solution in just 20 minutes. Restoring the normally use of your drye....

Check Stock

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

...Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..

Check Stock

F271239 One-Stop Universal Gas-Appliance Hook-Up Kit for Replacement Mr.Heater fits Gas Stoves, Gas Dryer, Garage Heaters, Gas Fireplaces and Wall Mounted Heaters

【Product Features】Replacement Mr.Heater F271239, 22" Universal Appliance Hook-Up Kit. The Brass Gas Shut-Off Valve Shuts Off Flow Directly for Easy Equipment Maintenance or Summer Shutdown..
【Applicable Objects 】Ideal for Use with Gas Logs, Garage Heaters, Gas Stoves, and Wall Heaters. Compatible with: Heaters, Logs, Stoves, Dryers, etc..
【Easy to install】This Gas Dryer Installation Kit is Very Easy to Install. All it Takes is a Wrench and a Bit Of Teflon Tape and You'll Be Set Up in Minutes..
【Quality Assurance】The Gas Dryer Fitting Kit is Made of Highly Durable Steel and Is Designed For Safety and Optimal Flow. It is Gas-Tight, Durable, Rust-Resistant, and Corrosion-Resistant. The Flexible Gas Hose is Designed with Corrugation, Which is Highly Flexible and not Easily Damaged. and The Corrugated Gas Fittings are Staggered Every 2 Inches to Eliminate Noise..
【Product Includes】You will Get a 6-Piece Universal Gas-Appliance Hook-Up Kit. Includes 22" Flexible Gas Line, On/Off Valve, and 3 Different Couplings..

Check Stock

338906 Dryer Flame Sensor & 279834 Gas Valve Ignition Solenoid Coil Kit & 3392519 Thermal Fuse by BlueStars – Exact Fit For Whirlpool Maytag Kenmore Dryers - Replaces WP338906 303377 DC32-00008A

✅ FULL KIT SET: 1 x 338906 Dryer Flame Sensor, 1 x 279834 Dryer Gas Valve Ignition Solenoid Coil Kit, 1 x 3392519 Dryer Thermal Fuse.
✅ PREMIUM QUALITY: The replacement parts are made from durable high quality material and well-tested by the manufacturer - Meets OEM standards - Ensure long-lasting and effective performance. The 338906 Dryer Flame Sensor senses heat from the igniter to monitor if it is hot enough to ignite gas to light the burner. Once the igniter is hot enough it will open the valve and allow gas to flow. This is a safety mechanism to prevent dangerous levels of gas from building up.
✅ HIGH COMPATIBILITY: It is made exactly fit for most top name brands (Kenmore, Whirlpool, Maytag, Amana, Roper). This kit fixes the following symptoms: No heat or not enough heat | Takes too long to dry | Shuts off too soon | Will not start | Timer will not advance.
✅ REPLACEMENT PART NUMBER: ► 338906 replaces: 14205529, 14210083, 14218928, 303377, WP338906, 35001096, 56231, 63-5013, AP6008294, DC32-00008A, WP338906VP, Y303377, Y56231, PS11741429, etc. ► 279834 replaces: 12001349, 14201336, 14201452, 14202750, 14205025, 14210032, 14210725, 14210908, 279834VP, 306105, 306106, 58804A, 58804B, 63-6614, 63-6615, 694539, 694540, AP3094251, etc.....

Check Stock

Beaquicy TDIDVKZW Indoor Dryer Vent Kit with 4-Inch by 5-Foot Proflex Duct, 4 Inch

✅【PRODUCT SPECIFICATIONS】---This TDIDVKZW Indoor Dryer Vent Kit is for venting electric dryers indoors to trap lint. Due to potentially harmful fu.mes and exhaust gas.es, this item is not recommended for use in gas dryers.Re-circulates heat back into the home. Duct has a 4-in diameter and extends to 5-ft in length..
✅【PACKAGE INCLUDES】---Includes 1 x 4-inch by 5-foot proflex dryer transition duct,1 x plastic lint reservoir, 2 x plastic adjustable clamps. It's ideal to use for indoor venting of electric clothes dryers. It includes Installation ring so it can be hung close to a dryer on a wall or wall stud..
✅【180 DAYS WARRANTY】---The product TDIDVKZW Indoor Dryer Vent Kit supports 180 days return and exchange. Our company attaches great importance to the shopping experience of each customer. Risk-free shopping, If you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve the problem. Customer satisfaction is our tireless pursuit..
✅【QUICK AND EASY TO INSTALL】--- ①Fill the bottom half of the water tank with water, and then close the lid. ②Slide one end of the ProFlex Indoor Dryer Vent onto the top collar of the reservoir and secure it with an adjustable clamp.③....

Check Stock

Quick Yoga Training - Nintendo DS

...eating wire coils.The dryer heating element has a nickel-chromium content of 90%. And the length of the heating wire is 25% longer than other common dryer replacement parts.More uniform heating & no damage to clothes.279838 dryer heating element is rated at 5400 Watts 240 Volts and it has 2- 5/16 inch male connection terminals..
✅【COST-EFFECTIVE 279838 HEATING ELEMENT KIT】---Includes 1 x 279838 Dryer Heating Element,1 x 3392519 Thermal Fuse,1 x 3977393 Thermal Cut-off,1 x 3977767 Dryer Thermostat,1 x 3387134 cycling thermostat with screws and wiring kit.▶3392519 Dryer thermal fuse, has two 3/16" wire terminals.▶279816 Thermal Fuse & Thermostat Kit includes thermal fuse, thermostat, screws, wiring kit.▶3977767 Dryer high limit thermostat has one 1/4" male terminal, 1/4" female terminal, and one 3/16" male terminal. L221..
✅【WIDE COMPATIBILITY】--- 279838 Dryer Heating Element Kit replacement for Whirlpool, Ken-more, Crosley, Roper, Estate, Amana, Admiral and more brand dryer. Replaces 279837, 279838A, 279838VP, 3398063, 3398064, 3403585, 8565582, W10724237, WP279837, 2438, AP3094254, PS334313, EAP334313,etc.►279838 ....

Check Stock

VIWINVELA 3 IN 1 Indoor Dryer Vent Kit Filter Bucket for Electric Dryer - No Duct Included

Safety for indoor dryer venting, ideal for apartments, condominiums and RVs.
③high temperature resistant lint filter.
Multiple Package for you to choose from: ①dryer vent kit without duct.
②dryer vent kit with 5-feet DOUBLE LAYER WHITE duct.
③dryer vent kit with 5-feet SLIVER duct.
Quick and easy to install, please note that when you snap the hose to the filter bucket and the dryer it may be a little laborious, this design makes the connection more stronger.
This dryer vent filter is detachable and can be reused after cleaning.

Check Stock

MCAMPAS 10 Feet 1/2 ID Natural Gas Quick Connect Hose and Regulator Replacement for Kitchen-Aid 710-0003 Gas Grill Conversion Kit,Convert 4-Burner Cabinet Style Gas Grill to Natural Gas

Natural gas hose and regulator for Kitchenaid gas grill conversion connection kit includes 10-foot length 1/2 inch ID natural gas hose with quick....
10 feet 1/2" ID gas quick connect hose with 1/2" male quick plug, 3/4-16 UNF female flare fitting on the other side.
5.9" manifold gas regulator hose kit - 1/2 PSI（3.5 Kpa) natural gas regulator valve. Can be switched manually natural Gas Or Propane gas regulator....
Compatible with converts these kitchenaid grill models to natural Gas: 720-0709, 720-0709B, 720-0709C, 720-0733, 720-0733A, 720-0745, 720-0745A,....
Used to convert the home's natural gas pipeline or large LP gas Gas tank cylinder quick connection to existing low pressure supply gas grill....

Check Stock

Appliance Pros Flexible Stainless Steel Gas Line for Dryer Gas Hose Connector Kit Comes with 1/2 OD 1/2 MIP x 1/2 FIP Stainless Steel GASLINE72

GAS DRYER INTENDED - A stainless steel gas line hose designed mainly for gas dryers. It measures 72" and has an inner dimension of 3/8". Other....
CORRUGATED DESIGN - Achieve full flexibility, because, with this corrugated gas appliance connector, lets you snake it into small spaces including....
PREMIUM QUALITY - A corrugated stainless steel gas dryer hose that has compression fitting to create a secure metal connection for heavy-duty use.....
CONVENIENT INSTALL - No tools required to install the piping. It features male and female iron pipes for easy connections. Just make sure your sizing....
ONE YEAR WARRANTY - With no compromise to quality, we provide premium durable products for the long-term, which is a seal to ultimate safety. This....

Check Stock