PROCURU 1/2" OD x 24" Long WeatherProof Stainless Steel Gas Flex Connector Kit with SafeGuard Coating for Dryers, Bbq Grills, Water Heaters
- 1/2" Outer diameter x 24" length (2 ft.) stainless steel gas connector with SafeGuard Coating for anti-corrosion and air-tight protection.
- (3) Brass fittings included: 1/2" MIP (tapped 3/8" FIP) (2 pcs), and 3/4" MIP (tapped 1/2" FIP) (1 pc).
- Also included: 4-Mil high-density PTFE sealant tape 1/2" x 520", gas leak detector, installation instructions.
- Designed for gas dryer, water heater, bbq grills, and other natural and propane gas appliances.
- 100% leak tested and sealed, CSA certified for indoor and outdoor use for natural, LP, and LP-gas air mixtures.
Check StockWhirlpool 20-48KITRC Gas Dryer Connector Kit
- Everything you need to hook up your gas dryer.
- Includes connection line, 3 fittings and sealant.
Check StockEXCELFU Flexible Dryer Gas Hose Dryer Gas Appliance Line Connector with Fittings Compatible with 1/2' OD 1/2' MIP x 1/2' FIP Hose Connection, Stainless Steel(6 Feet)
- Hose Fittings are compatible with 1/2" MIP and 1/2" FIP, it can create a secure metal connection for heavy-duty use.
- Designed for gas dryer: This 72" Flexible Stainless Steel Gas Appliance Line is not universal, it is mainly designed for gas dryers and not for ovens or ranges.
- Product Parameters: Inner dimensions of this line are 3/8", Outside dimensions of this line are 1/2".
- Corrugated design: This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
- Easy to install: No tools need to install the piping. It come with male and female iron pipes for easy connections. Make sure you are in need of 1/2 gas piping otherwise this will not fit.
Check Stock
EZ-Fluid 24" Stainless Steel Corrugated Yellow Epoxy Coated 1/2" MIP x 1/2" FIP Gas Flex,Flexible Natural Gas Connector Hose Supply Line For Gas Pipe,Hot Water Heater,Range,Dryer,Stove(1 Pack)
- EZ-Fluid Stainless Steel Corrugated Flexible Natural Gas Hose Connector Suppy Line Has Yellow coated polymer exterior for extra protection and flexibility.
- EZ-Fluid 3/8" FIP or 1/2" MIP x 1/2" FIP Stainless Steel Corrugated Yellow Epoxy Coated Gas Flex,Flexible Natural Gas Connector Hose Supply Line. CSA certified and ideal for indoor and outdoor use.
- Comes with MIP and FIP flare fittings. Fits on 1/2" FIP Gas valve or 1/2" Flare x 1/2" FIP Gas Valve,Male end Flare Fitting come with 1/2" NPT outter Thread and 3/8" NPT inner Thread..
- Application For residential/commercial tank and Gas tankless ,Hot water Gas heater, boiler, fryer, stove,Dryer,Range,Gas Pipe ,Fire pit ,Grill and more.
- The corrosion-resistant yellow coating protects the product from exposure from harsh weather and certain chemicals.
Check Stock
Replacement for LG Kenmore Dryer LP Gas Conversion Kit 383EEL3002D AP5204371 PS3522300
- Dryer LP conversion kit 383EEL3002D converts a natural gas dryer to operate on liquid propane.
- The LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer.
- Dryer LP conversion kit 383EEL3002D is an part that fits some gas dryers in these series: Kenmore 796.
- LG 383EEL3002D Dryer LP Gas Converter. for use with the following LG Electronics models: DLGX5102V, DLGX5102W, RN1317AS, RN1317TS. LG 383EEL3002D Dryer LP Gas Converter. For use with the following LG Electronics models: DLGX5102V, DLGX5102W, RN1317AS, RN1317TS. Refer to your manual to ensure ordering the correct, compatible part.
- Dryer LP conversion kit 383EEL3002D is an equipment manufacturer part that fits some gas dryers in these series: Kenmore 796.
- and LG DLG and DLGX. Dryer LP conversion kit 383EEL3002D converts a natural gas dryer to operate on liquid propane. The LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer. A qualified technician should install this LP conversion kit because of the risk of explosion or fire if the kit is installed in.
Check StockEXCELFU Safety-Shield Gas Appliance Line Flexible Dryer Gas Hose Connector Kit - 5/8 In. OD (1/2 In. ID) 1/2 In. MIP X 1/2 In. MIP X 3/4 In. MIP X 48 In. Length Yellow Coated
- Adapter Included 2 Pcs 5/8 In.OD Flare x 1/2 In. MIP (Tapped 3/8 In. FIP) and 2 Pcs 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP).
- This gas appliance connector kit are designed for Ranges, Stoves, Furnaces or Boilers.
- 304 Stainless steel flexible tubing with plated steel end fittings capacity 106,000 BTU.
- 48 inch long stainless steel corrugated gas range and dryer connector kit are perfect for indoor or outdoor use.
- This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
Check Stock
279834 Gas Valve Ignition Solenoid Coil Kit by Beaquicy - Replacement Part for Ken-more Whirlpool Samsung Estate Magic Chef Dryer - Replaces ap3094251
- ✅ 【ULTRA DURABLE PRODUCT】: The 279834 Gas Valve Coil Set is suitable for dryers. The 279834 dryer valve ignition solenoid kit has a 3-terminal boost/hold coil and a 2-terminal secondary coil.This is a safety mechanism to ensure that there is no unsafe gas accumulation in your device. When the igniter reaches a sufficiently high temperature, these coils open the gas valve, allowing gas to enter the burner..
- ✅ 【PRODUCT PACKAGE】:Includes 1 Pair x 279834 dryer gas valve ignition solenoid coil kit.279834 Gas Valve Ignition Solenoid Coil Kit includes two new gas coils. One coil is the primary coil and the other is the safety coil. No matter which component stops working, it should be replaced in pairs.Because both coils must be operable,then the valve can be opened,and the heating element will work normally.The kit can replace most new style gas coils..
- ✅【365 DAYS WARRANTY】:279834 Gas Valve Coil Set supports 365 days return and exchange.Our company attaches great importance to the shopping experience of each customer.Risk-free shopping, If you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve the problem. Customer satisfaction is our tireless pursuit..
Check Stock
Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece
- ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
- USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
- Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
- BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
- Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
- INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
- Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
- To install fittings, pull up lever on ball lock disconn....
Check StockGASPRO 3/8-Inch Natural Gas Hose with Quick Connect Fittings Natural Gas Line for Grill Pizza Oven Patio Heater and More 12-Foot
- [ Only For Natural Gas ] Used for connecting natural gas appliances..
- [ Multi-Suitability ] Perfect for Weber natural gas grill, patio heater, pizza oven and more NG appliances..
- [ Flexible Hose ] 12 feet 3/8-inch inside diameter hose with 3/8" male quick disconnect plug x 3/8" female flare..
- [ Brass Fittings ] 3/8" quick connect/release fitting, make it easy to attach and remove this gas hose as needed..
- [ Durable & Safe ] This natural gas grill hose features solid brass fittings and long lasting rubber hose to provide safety and no leakage..
Check StockTechecook STV-90 Dryer Duct Connector fit 4in Vent Ducting - Dryer Snap to Vent 90 Elbow, Indoor Hook-up Dryer Vent Kit
- ✅【DIY INSTALLATION】The installation needs to use screwdriver. Wear gloves to protect your hands and cut off power and water before you start. You can find the repair video on YouTube and follow it to install the duct for dryer. You can quickly install, snap and insert your dryer hose vent fittings and fittings in a fraction of the time. Rugged material extends dryer vent connector life.
Check StockMSA 10089321 Calibration Assembly for ALTAIR 4X Multi-Gas Detectors, Includes: Cap, Tube, and Connector, Ensure Detector Stays Calibrated for Maximum Accuracy
- PEN Style Combustible Gas Leak Detector with Gooseneck.
- 40ppm methane sensitivity and bearing defects.
- Trace natural gas lines and fittings for leaks frame to failure.
- Test propane tanks, fittings, lines, and heaters for leaks.
Check Stock
Beaquicy TDIDVKZW Indoor Dryer Vent Kit with 4 Inch by 10 Feet Flexible Clothes Dryer Duct
- ✅【CHOICE NOT TO BE MISSED】--- The TDIDVKZW Indoor Dryer Vent Kit is for venting electric dryers indoors to trap lint. Due to potentially harmful fu.mes and exhaust gas.es, this item is not recommended for use in gas dryers. Duct has a 4-in diameter and extends to 10-ft in length. The package includes 1 x 4-inch by 10-feet proflex dryer transition duct,1 x plastic lint reservoir, 2 x plastic adjustable clamps. It includes Installation ring so it can be hung close to a dryer on a wall or wall stud..
- ✅【USER FRIENDLY】---TDIDVKZW Indoor Dryer Vent Kit is for venting electric dryers indoors to trap lint. It is made of quality materials to prevent crushing or other possible damage to the kit. The pipes are flexible and soft, and can be installed quickly and easily, and it can be used when it is connected to the clothes machine. The indoor dryer vent kit is detachable and can be reused after cleaning. Ideal for apartments, condominiums and R.V.s but should not be used with gas clothes dryers..
- ✅【MADE OF DURABLE MATERIAL】 --- This TDIDVKZW Indoor Dryer Vent Kit is made from durable high quality material to prevent crushing or other possible damage to the kit. Well-tested by the manufacturer, non OEM but quality equal to OEM requirements. High ....
Check Stock
DRELD Male 5042 QCC1 Nut Propane Gas Fitting Adapter with 1/4 Inch Male Pipe Thread, Propane Quick Connect Hose Adapters Fittings, Solid Brass Outdoor Cooking Propane Adapter
- >[PREMIUM MATERIAL]: High quality solid brass construction makes it corrosion resistant. 100 percent machined and all fits and seals. Works well, no leaks, high quality, no wrench required. Stamping fittings are available (hose and thread sides must be replaced)..
- >[CONNECTION]: Converts QCC1/Type 1 Male and POL Female Connection to 1/4'' Inch male pipe thread. makes changing propane tanks so much easier, solved propane flow issues. can hand screwed it to the gas tank easily without using any tool. No gas leak on either side. It is well-made, seems to last for a long time..
- >[THREAD]: One End Outer QCC1/Type Male Thread, Inner POL Female Thread. Other End 1/4 Inch Male Pipe Thread. The device is very useful, but be very careful not to overfill a disposable cylinder. Suitable for 2 - pound cylinder filling. Connectors have no built-in adjusters. There is a through hole..
- >[EASY INSTALLATION]: Adapter shape and Easy to connect attachment and long-lasting durability.Don't use it around open flame or cigarettes or anything stupid like that. It's very safe. A good camper's tool. Be sure to keep the Coleman bottle in the refrigerator, cold spring, freezer, or freezer. Over time, the gas in the supplier's bottle will flow faster and the liquid will turn into g....
Check Stock
