Categories

Best Gas For Soldering Copper Pipe

Sewer Skewer Vent Defroster for Sewer Pipes & Roof Vents, Prevents Freezing & Clogging, Copper Tee, Made in USA

  • PREVENTS SEWER PIPES FROM CLOGGING -The original Sewer Skewer prevents sewer vent pipes from freezing and stops methane sewer gas backup.
  • MELTS SNOW & ICE - Made of copper which conducts heat from the sun and sewer gas to the top of sewer vent to melt ice and snow.
  • FITS ANY SIZE PIPE – No measuring required, simply drop it in the sewer vent pipe and it begins to work and is rated for -15 degrees below zero.
  • WORKS FOR FURNACE VENT PIPES – Copper skewer will not melt and can be used in furnace vent pipes to prevent ice and snow clogging pipe.
  • ASSEMBLED IN USA BY ADULTS WITH DISABILITYS WITH PORTIONS SUPPORTING DISABLED VETERANS.
Check Stock

Rapid Repair RP77271 1/8 Inch to 1-5/8 Inch Outside Diameter Pipe and Tubing Reamer, Red (Single Pack)

  • Removes burrs on tubing from 1/8 inch to 1-5/8 inch outside diameter.
  • NOTE FOR USE: Little pressure is needed to deburr smaller pipe and tubing, too much force will cause damage to the pipe or tubing.
Check Stock

Propane Torch ,Mapp Torch Head,MAPP/MAP/PROPANE Gas Torch(Stainless Head)

  • 【wide use】Install the propane cooker cutting torch is capable for various working environments including large diameter soldering,brazing,heat treating, glassblowing, and light welding.For soldering & Brazing application in HVAC and plumbing..
  • 【Powerful and easy to control flame】 The high-quality vortex propane design can make the flame provide the maximum heat output. The knob on the cutting torch can easily control the flame size to meet the needs of different projects..
  • 【Easy to use】Install the propane cooker cutting torch handle on your gas tank, then turn the knob to ignite the flame to start welding..
  • 【Elaborate design】The brass torch is resistant to high temperature, not easy to corrode, and durable. The propane pencil torch tip is a threaded joint with a diameter of 0.6 inches (1.6 cm), which can finely weld copper pipes with a diameter of less than 1 inch (3 cm).The maximum diameter of soldering can reach 3.9 inches (10cm)..
  • 【Product certification】Trigger to start the propane hose cutting torch using SPARC MAPP / propane gas hose cutting torch. Reliable product quality has obtained a number of safety certifications, including CE, ISO9001 certification can be used with confidence..
Check Stock

BLUEFIRE Trigger Start Gas Welding Torch Head with Propane Kit,Extend 1.5" Tube Piezo Self Ignition Nozzle Fuel by MAPP MAP PRO Propane 1lb Handheld Cylinder Soldering Brazing Triple-Point Flame

  • Complete Kit sell with BLUEFIRE 14.1 oz Standard Propane Gas Cylinder, >93% Purity! Ready-to-Work Kit..
  • Caution: Tipping the gas cylinder to more than 60 degrees from its upright position may cause the torch to flare. It is recommended to start working with a disposable handheld cylinder at room temperature and to keep the torch upright as much as possible.
  • 1.5" Extended version of Stainless steel Burner, adds more reliability and safety. Trigger Start Ignition for instant 1-click flame light up, updated version igniter for improved ignition rate, perfect work with Propane, MAPP, MAP-PRO, threading fits CGA600 US standard 1lb fuel gas cylinder.
  • Strong and Stable Triple-point Flame Structure for precision soldering/brazing. Adjustable flame knob for control flame size, solid brass valve constructed for durability.
  • Suitable for Soldering copper pipes up to 3/4″, Soldering electronic circuits, Thawing frozen pipes and locks, Loosening rusted nuts and bolts..
Check Stock

Propane Torch ,BBQ Torch ,MAPP/MAP/PROPANE Gas Torch,Soldering Torch (Basic simple payment)

  • 【wide use】Install the propane cooker cutting torch is capable for various working environments including large diameter soldering,brazing,heat treating, glassblowing, and light welding.For soldering & Brazing application in HVAC and plumbing..
  • 【Powerful and easy to control flame】 The high-quality vortex propane design can make the flame provide the maximum heat output. The knob on the cutting torch can easily control the flame size to meet the needs of different projects..
  • 【Easy to use】Install the propane cooker cutting torch handle on your gas tank, then turn the knob to ignite the flame to start welding..
  • 【Elaborate design】The brass torch is resistant to high temperature, not easy to corrode, and durable. The propane pencil torch tip is a threaded joint with a diameter of 0.6 inches (1.6 cm), which can finely weld copper pipes with a diameter of less than 1 inch (3 cm).The maximum diameter of soldering can reach 3.9 inches (10cm)..
  • 【Product certification】Trigger to start the propane hose cutting torch using SPARC MAPP / propane gas hose cutting torch. Reliable product quality has obtained a number of safety certifications, including CE, ISO9001 certification can be used with confidence..
Check Stock

BLUEFIRE MRS-7014B Trigger Start Gas Welding Torch Head for Propane & MAP PRO Fuel,Extend 1.5' Burning Tube Nozzle Piezo Self Ignition Handhold Cylinder Soldering Brazing Triple-Point Flame

  • OPTIMIZE FOR PROPANE: This torch is specially designed to use on Standard Propane and MAP PRO (Propylene), if you are using Bluefire MAPP, please DO NOT choose this one, switch to the MAPP Torch Special Version listed in the same page, which is optimized for Bluefire MAPP Gas.
  • CAUTION: Tipping the gas cylinder to more than 60 degrees from its upright position may cause the torch to flare. It is recommended to start working with a disposable handheld cylinder at room temperature and to keep the torch upright as much as possible.
  • EASY & SOLID: Trigger Start Ignition for instant 1-click flame light up, upgraded version igniter for improved ignition rate, perfect work with Propane, MAPP, MAP-PRO. Adjustable flame knob for control flame size. Solid Brass constructed regulator valve for durability, threading fits CGA600 US standard fuel gas cylinder.
  • LONGER TUBE: 1.5" Extended version of Stainless steel Burner, adds more reliability and safety. Strong and Stable Triple-Point Flame Structure for precision soldering/brazing.
  • ALL-PURPOSE: Suitable for soldering copper pipes up to 3/4″, Soldering electronic circuits, Thawing frozen pipes and locks, Loosening rusted nuts and bolts. You can even use it for cooking and camping..
Check Stock

IWISS Angle Head F1807 PEX Pipe Crimping Tool for Copper Rings - 1/2&3/4&1-inch Three Crimper Set with Cutter

  • 【Features】For 1/2”, 3/4”, 1” copper tubing pressing..
  • Automatic locking of pressing tongs. 360-degree rotating head.
  • Forging craft promises jaws to give pipe fittings an accurate press without scratches..
  • 【Ergonomic Design】Extendable handles for improved leverage. Creates leak-free connections, No more brazing, soldering or flaring. Ergonomic handle design and comfortable handle can minimize user fatigue..
  • 【Cutter & Deburring Tool】The cutter can quickly and easily obtain clean rounded cuts on pipes with outer diameter of 1/8" -1 1/4".
  • Deburring tool with high-quality speed steel 360 degree rotary mounting head.
  • Practical tools to make your project easier..
  • 【Wide Application】Compatible with Viega Copper, Pro-Press, Elkhart, Conex Pipe Fittings..
Check Stock

DuraChoice 2-1/2\ Oil Filled Vacuum Pressure Gauge, Water Oil Gas - Stainless Steel Case, Brass, 1/4\ NPT, Lower Mount Connection -30HG/30PSI

  • [MATERIAL]: Housing Material: Stainless Steel.
  • [APPLICATION]: Brass wetted parts for measuring non corrosive liquid and gas pressure. It is widely used in heating pipe network, oil and gas transmission, water supply and gas supply system, vehicle maintenance shop, etc..
  • [HIGH PERFORMANCE]: Shock resistant,can be used in vibration places.
Check Stock

Hose Torch Kit, Propane/MAPP, 5 Ft Hose

  • 【Easy to use】A 3.6ft hose makes it easier to get the map gas torch head into tight places. Hose length of Mapp gas torch provides great reach when the hook is clipped to belts..
  • 【Multipurpose use】Flow control knob near torch head for adjustable flame efficiently.Portable Mapp gas torch suitable for soldering copper pipes, welding, brazing, HVAC, cooking and grill, snow melting, burning steak, heat shrinkage, etc..
  • 【Stable performance】 Auto trigger start igniter makes our hose torch head super fast to light flame for simple one-handed operation.Our Mapp gas torch fuel by Propane, MAPP, MAP-PRO cylinder with CGA600 interface..
  • 【Premium material】The torch head Solid brass regulator is Pressure-regulated, durable Mapp gas torch stainless steel nozzle that withstand high temperature for a hotter, more efficient swirl flame..
  • 【Includes】 Torch head handle | Hose with CGA600 regulator | 2 x o-ring | Instruction Manual | 1 x cylinder clip | 5 x brazing welding rods. Mapp gas torch provides 30-Day full refund and 1-Year Limited Service..
Check Stock

Rectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant

  • RECTORSEAL 5 pipe thread sealant multi-purpose, 1/4 pint – R514.
  • Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings.
  • Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only.
  • Ideal for application with a wide variety of fluids and gases including potable water applications.
  • Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Check Stock

EASTMAN Sterling Lead Free Solder, Silver, 85325 EASX1, 1 Count (Pack of 1)

  • PLUMBING SOLDER: Pipe soldering is ideal for sealing, joining, coating, and filling metals.
  • COMPATIBILITY: Solder wire is perfect for use on brass, bronze, copper, galvanized iron, monel, steel, stainless steel and all other solderable alloys that require maximum reliability of solder joints.
  • VERSATILITY: Designed for safe use in potable water applications for plumbing, heating, and industrial applications.
  • DURABLE: The Flo Safe lead free solder metal is alloyed from pure virgin metals.
  • meets all state and federal specifications for Safe Drinking Water Act, and meets ASTM B-32 alloy TC specification.
  • MELTING POINT: Pipe solder features a maximim temperature before melting of 410 degrees.
Check Stock

SharkBite 3/4-Inch Tee, Push-to-Connect, PEX, Copper, CPVC

  • INSTALLS IN SECONDS: 3/4-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
  • VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
  • COMPATABILITY: Same as part numbers U370LFZ and U370LF.
  • QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

SharkBite 22187-0000LFA Ball Valve 1 Inch x 1 Inch, Water Valve Shut Off, Female, FNPT, Push-to-Connect, PEX, Copper, CPVC, PE-RT

  • INSTALLS IN SECONDS: 1 inch ball water valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating Applications..
  • COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX pipe tubing meets the same standards for commercial and residential plumbing applications.
Check Stock