Categories

Best Gas Hose With Connectors

Karcher Replacement Quick Connect Adapter Kit for Electric & Gas Power Pressure Washers

  • The Karcher Promise: Cleaner. Quicker. Best-in-class cleaning performance..
  • Compatible with Karcher electric and gas pressure washers..
  • Replaces garden hose quick connect adapters on Karcher electric pressure washers..
  • Can also be used to convert threaded connectors on Kärcher gas pressure washers to quick connect..
  • The yellow piece attaches to your garden hose, the black piece to the water inlet on your pressure washer..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ... YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball ....
Check Stock

26FV Series - 200 Amp - Air Cooled - Flexible Head TIG Torch with Valve - 12.5 feet 2-Piece Cable - Dinse 35-70 Connector

  • 200 Amp fully assembled 26V Series TIG Torch, designed for welders with Dinse or Stud Connectors or with separate TIG Module or TIG Box..
  • Choose between 5/16" Terminal, LC-40 cable connectors or Dinse Style Connectors, (Please check Picture #2 for dimensions and characteristics).
  • Available with 12.5 or 25 feet Cable and Straight or Flexible Head. Torch head with valve for a manual closure of argon flow..
  • 2 Pieces, gas hose is separate from power cable for independent connection with welder gas outlet or directly to the argon flowmeter..
  • Accessory Kit and Heavy-Duty Nylon Cable Cover are Included. Other accessories might be needed to connect the argon line to your welder or flowmeter.....
Check Stock

Pressure Washer Hose 100FT X 1/4", Aihand Grade Steel Wire Braided Kink Resistant & Super Flexible Power Washer Extension Hose Hot/Cold Water Rubber hose 3/8" Quick Connect Adapters, 4200 PSI, Blue

  • ...ng. In addition, the replacement and extension pressure washer hose can withstand water with a max temperature of 176 ℉ and a min temperature of - 10 ℉..
  • 【Wear Resistant & Solid Brass】This replacement and extension pressure washer hose is equipped with reliable connectors. It uses durable American Standard solid brass M22-14mm internal thread connectors with high-quality O-rings, which can ensure the safe connection with the gas-powered pressure washer . These can not only reduce wear and prolong the service life of the hose, but also ensure safety and stability during operation..
  • 【Multi-purpose Washing Design】 Aihand 100FT flexible pressure washer hose is suitable for various purposes and can be widely used to clean cars, decks, floors, motorcycles, gardens, houses, etc. It can cope with a variety of pressure demands, providing users with more choices and flexibility. This high quality power washer hose can also be compatible with multiple brands of pressure washers. Please note that adapters are required to install some electric pressure washers..
  • 【What You Get】Aihand offers 100FT pressure washer hose,....
Check Stock

NQN 2-Stage Automatic Changeover LP Propane Gas Regulator with Two 18" RV Pigtail Propane Hoses with Gauge, Stainless Braided QCC1 1/4" Inverted Male Flare

  • ... 【Specification & parameters】RV Propane Regulator: Primary Cylinder Capacity 210,000 BTU/hr, Reserve Cylinder 130,000 BTU/hr. Inlets are 1/4" SAE Inverted Flare, Outlet is 3/8" Female NPT, RV Pigtail Propane Hose: 1/4" Male Inverted Flare and QCC1 Fitting. All Fitting Connectors of Propane Hose, both ends of 2-stage regulator made of 100% Solid Brass. RV propane hose made of durable stainless steel braided. Propane Hose and regulator with CSA Certification ensure air tightness 、stability.
  • 【2 Pack 18''Stainless Braided QCC1 1/4" Inverted Male Flare RV Pigtail Propane Hose with Gauge】1/4" inverted male flare stainless steel braided RV propane pigtail hose to 1/4" inverted male flare. (Not the 1/4" Male NPT. Please check your connector before you order it.) This propane tank hose come with tank gauge level indicator with 3 different colors Dial Gauge can glows in dark, allows you to read and monitor the gas level without necessarily removing the tank, and can detect the leak.
  • 【Application Scenarios】This 2-Stage Auto Changeover LP Propane Gas Regulator for RV , suitable for RV with d....
Check Stock

DuroMax XP650WP 208cc 220-Gpm 3,600-Rpm 3-Inch Gasoline Engine Portable Water Pump, 50 State Approved, XP650WP, Blue

  • Includes intake hose end strainer, threaded hose end connectors, hose clamps, and tool kit with plug wrench.
Check Stock

Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit

  • ✅【PRODUCT DESCRIPTION】: The STV-90 dryer duct exhaust connector consists of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
  • ✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
  • ✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve t....
Check Stock

2-Stage Automatic Changeover LP Propane Gas Regulator with Two 18" RV Pigtail Propane Hoses with Gauge, Stainless Braided QCC1 1/4" Inverted Male Flare, Propane LP Gas Regulator for RV Camper Trailer

  • ... ❤【Specification & Material】RV Propane Regulator: Inlets are 1/4" SAE Inverted Flare, Outlet is 3/8" Female NPT, Primary Cylinder Capacity 210,000 BTU/hr, Reserve Cylinder 130,000 BTU/hr. RV Pigtail Propane Hose: 1/4" Inverted Male Flare and QCC1 Fitting. All Fitting Connectors of Propane Hose, both ends of 2-stage regulator made of 100% Solid Brass. RV propane hose made of durable stainless steel braided. Propane Hose and regulator with CSA Certification, ensure air tightness and stability..
  • ❤【For RV/Camper/Travel Trailer】This 2-Stage Auto Changeover LP Propane Gas Regulator for RV with two 18 inch Pigtails RV Propane Gauge Hoses Set, suitable for RV with dual propane tanks. These 18" RV pigtail propane hoses with 2-stage propane regulator can connect dual 5-40 lb refillable propane tanks or LP gas tanks to your camper's 1/4" inverted male flare. Replace any existing automatic changeover regulator on your current RV, Travel Trailer, Camper, maintains constant an continuous gas..
  • ❤【Package List & 100% Satisfaction Guarantee Promise】Package includes: 1 PC 2 Stage Auto Changeover RV Propan....
Check Stock

Puxyblue 72 Inche Gas Hose Connector Kit for Dryer,Flexible Stainless Steel Gas Line Come with 1/2' OD 1/2' MIP x 1/2' FIP

  • Made for Gas Dryers: Flexible Stainless Steel Gas Line that's mainly designed for gas dryers.It measures 72 inches and come with 1/2" OD 1/2" MIP x 1/2" FIP..
  • Corrugated Design: The stainless steel gas pipeline hose adopts a corrugated design, which can be installed and meandered into small spaces including corners and bends. The bright yellow outer skin also improves the recognition..
  • Premium quality:The product is made of high-quality, sturdy and durable stainless steel material, which is not easy to damage and it can help prolong the life of your dryers..
  • Easy to Install: Fixing it yourself is simple and cost-effective.No need for more connectors. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • Dispel your Concerns: If you are not satisfied with the product for any reason, you may request a replacement or a full refund. If you are not sure if this replacement part is right for your appliance, please feel free to contact us or ask a question through Amazon, it would be our pleasure to serve you!.
Check Stock

SÜA 25' Heavy Duty Straight Cutting Torch 90º Head

  • Die Forged Brass and Stainless Steel Heavy Duty OxyFuel Cutting Torch Compatible with Harris.
  • Uses Series 6290NX Propane and 6290NXP Propylene Cutting Tips - Gas Service: Oxygen and Propane/Propylene with appropriate tips..
  • Can cut up to 3" (76 mm), with included 6290NX-3 (propane), tip and up to 8" (203 mm), with additional tips. See tip chart for reference.
  • Head Angle: 90 ° - Weight of Torch: 3 Lb - Gas Inlets 9/16" - 18 R and L (B-B Connectors for Twin Welding Hose).
Check Stock

DuroMax XP652WP 208cc 158-Gpm 3600-Rpm 2-Inch Gasoline Engine Portable Water Pump, 50 State Approved, XP652WP, Blue

  • Back Flow Check Valve. Maximum overhead lift: 92- feet.
  • Includes intake hose end strainer, threaded hose end connectors, hose clamps, and tool kit with plug wrench.
  • Automatic Low Oil Shut Off.Maximum Flow Rate:158 GPM.
  • EPA Approved. Ease Of Use: Anyone can use it - EZ-Pull Recoil Start System allows for simple startup without multiple pulls.
Check Stock

Ignik Gas Growler Carry Case and Hose Kit for 5-Pound Refillable Propane Tank

  • Insulated protective case and adapter hose kit for Ignik 5-pound (1.2 gallon), refillable propane tanks (sold separately).
  • Molded gas growler carrying case has room to tote the included hose, as well as wrench storage.
  • ideal for transporting tank when camping, boating,....
  • Rugged Molle stitched webbing for easy carry, attaching accessories, and strapping down for transport.
  • Included 4-foot adapter hose fits 1-inch 20UNEF connectors, which includes many popular 2-burner camp stoves, as well as 0.5-inch QCC1/OPD compatible....
Check Stock

Keg Kit with 5 Gallon Ball Lock Keg, 5 lb Aluminum CO2 Cylinder, Regulator, and All Accessories

  • Unique Long 15 Feet Tubing for Multiple Keg Dispensing: compared to other brewing hose kits, MRbrew co2 gas dispensing hose features a great length of 15 feet, you can apply this hose to your sankey keg tap system and cornelius ball lock kegging system simultaneously by cutting this 15 feet hose, this pretty long homebrew gas line can be cut into multiple sections to meet your mutiple kegging needs perfectly..
  • Can be Easily Cut by Cutting Tool: the short length brewing hose kit can not be cut and it can not be applied to your multiple keg dispensing process simultaneously, or the fixed hose fitting kit comes with extra fittings and you need to spend extra money, this 15 feet gas line can be cut into any length to meet your needs, you can can equip it with your own brewing dispensing parts, brings great convenience and creative possibilities for your multi-kegging brewing dispensing system..
  • Powerful No Leaking Pressure Transferring Tubing: the inside diameter of this great long kegging dispensing hose is 7mm, thick enough hose wall prevents the gas tubing kinks and maintains hose shape stability, smoothly transmit gas without leakage with the help of hose clamps. you can attach this kegerator hose to the beer barb fitting connector that has an outside ....
Check Stock