Categories

Best Gas Line For Dryer

Appliance Pros Flexible Stainless Steel Gas Line for Dryer Gas Hose Connector Kit Comes with 1/2 OD 1/2 MIP x 1/2 FIP Stainless Steel GASLINE72

  • GAS DRYER INTENDED - A stainless steel gas line hose designed mainly for gas dryers. It measures 72" and has an inner dimension of 3/8". Other....
  • CORRUGATED DESIGN - Achieve full flexibility, because, with this corrugated gas appliance connector, lets you snake it into small spaces including....
  • PREMIUM QUALITY - A corrugated stainless steel gas dryer hose that has compression fitting to create a secure metal connection for heavy-duty use.....
  • CONVENIENT INSTALL - No tools required to install the piping. It features male and female iron pipes for easy connections. Just make sure your sizing....
  • ONE YEAR WARRANTY - With no compromise to quality, we provide premium durable products for the long-term, which is a seal to ultimate safety. This....
Check Stock

F271239 One-Stop Universal Gas-Appliance Hook-Up Kit for Replacement Mr.Heater fits Gas Stoves, Gas Dryer, Garage Heaters, Gas Fireplaces and Wall Mounted Heaters

  • 【Product Features】Replacement Mr.Heater F271239, 22" Universal Appliance Hook-Up Kit. The Brass Gas Shut-Off Valve Shuts Off Flow Directly for Easy Equipment Maintenance or Summer Shutdown..
  • 【Applicable Objects 】Ideal for Use with Gas Logs, Garage Heaters, Gas Stoves, and Wall Heaters. Compatible with: Heaters, Logs, Stoves, Dryers, etc..
  • 【Easy to install】This Gas Dryer Installation Kit is Very Easy to Install. All it Takes is a Wrench and a Bit Of Teflon Tape and You'll Be Set Up in Minutes..
  • 【Quality Assurance】The Gas Dryer Fitting Kit is Made of Highly Durable Steel and Is Designed For Safety and Optimal Flow. It is Gas-Tight, Durable, Rust-Resistant, and Corrosion-Resistant. The Flexible Gas Hose is Designed with Corrugation, Which is Highly Flexible and not Easily Damaged. and The Corrugated Gas Fittings are Staggered Every 2 Inches to Eliminate Noise..
  • 【Product Includes】You will Get a 6-Piece Universal Gas-Appliance Hook-Up Kit. Includes 22" Flexible Gas Line, On/Off Valve, and 3 Different Couplings..
Check Stock

Replacement for LG Kenmore Dryer LP Gas Conversion Kit 383EEL3002D AP5204371 PS3522300

  • Dryer LP conversion kit 383EEL3002D converts a natural gas dryer to operate on liquid propane.
  • The LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer.
  • Dryer LP conversion kit 383EEL3002D is an part that fits some gas dryers in these series: Kenmore 796.
  • LG 383EEL3002D Dryer LP Gas Converter. for use with the following LG Electronics models: DLGX5102V, DLGX5102W, RN1317AS, RN1317TS. LG 383EEL3002D Dryer LP Gas Converter. For use with the following LG Electronics models: DLGX5102V, DLGX5102W, RN1317AS, RN1317TS. Refer to your manual to ensure ordering the correct, compatible part.
  • Dryer LP conversion kit 383EEL3002D is an equipment manufacturer part that fits some gas dryers in these series: Kenmore 796.
  • and LG DLG and DLGX. Dryer LP conversion kit 383EEL3002D converts a natural gas dryer to operate on liquid propane. The LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer. A qualified technician should install this LP conversion kit because of the risk of explosion or fire if the kit is installed in.
Check Stock

EZ-Fluid 24" Stainless Steel Corrugated Yellow Epoxy Coated 1/2" MIP x 1/2" FIP Gas Flex,Flexible Natural Gas Connector Hose Supply Line For Gas Pipe,Hot Water Heater,Range,Dryer,Stove(1 Pack)

  • EZ-Fluid Stainless Steel Corrugated Flexible Natural Gas Hose Connector Suppy Line Has Yellow coated polymer exterior for extra protection and flexibility.
  • EZ-Fluid 3/8" FIP or 1/2" MIP x 1/2" FIP Stainless Steel Corrugated Yellow Epoxy Coated Gas Flex,Flexible Natural Gas Connector Hose Supply Line. CSA certified and ideal for indoor and outdoor use.
  • Comes with MIP and FIP flare fittings. Fits on 1/2" FIP Gas valve or 1/2" Flare x 1/2" FIP Gas Valve,Male end Flare Fitting come with 1/2" NPT outter Thread and 3/8" NPT inner Thread..
  • Application For residential/commercial tank and Gas tankless ,Hot water Gas heater, boiler, fryer, stove,Dryer,Range,Gas Pipe ,Fire pit ,Grill and more.
  • The corrosion-resistant yellow coating protects the product from exposure from harsh weather and certain chemicals.
Check Stock

60 Inch Gas Hose Connector Kit for Stove Dryer Gas Water Heater Pipe Diameter 5/8 in OD（1/2 in ID） Connector Size 1/2 FIP.1/2 MIP.3/4 MIP Stainless Steel Yellow Rind

  • KIT INCLUDE: 1 set bellow with yellow rind. 2 pack threaded connectors 15/16 Inch-16 UNx3/4 Inch MIP(Tapped 1/2Inch FIP ), 2 pack 15/16 Inch-16 UNx....
  • COMPATIBLE WITH: A stainless steel gas line hose designed mainly for gas stove, gas dryer, gas water heater. It has an outside dimension of 5/8 inch,....
  • DESIGNED CORRUGATED: The stainless steel gas line hose is designed with corrugation, for better use in a narrow range. The corrugated pipe has high....
  • EASY TO INSTALL: No need for more connectors. Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more....
  • ONE YEAR WARRANTY: Safe use is always the first goal of the product.Our products have gone through many quality checks and we never compromise on....
Check Stock

279834 Gas Valve Ignition Solenoid Coil Kit by Beaquicy - Replacement Part for Ken-more Whirlpool Samsung Estate Magic Chef Dryer - Replaces ap3094251

  • ✅ 【ULTRA DURABLE PRODUCT】: The 279834 Gas Valve Coil Set is suitable for dryers. The 279834 dryer valve ignition solenoid kit has a 3-terminal boost/hold coil and a 2-terminal secondary coil.This is a safety mechanism to ensure that there is no unsafe gas accumulation in your device. When the igniter reaches a sufficiently high temperature, these coils open the gas valve, allowing gas to enter the burner..
  • ✅ 【PRODUCT PACKAGE】:Includes 1 Pair x 279834 dryer gas valve ignition solenoid coil kit.279834 Gas Valve Ignition Solenoid Coil Kit includes two new gas coils. One coil is the primary coil and the other is the safety coil. No matter which component stops working, it should be replaced in pairs.Because both coils must be operable,then the valve can be opened,and the heating element will work normally.The kit can replace most new style gas coils..
  • ✅【365 DAYS WARRANTY】:279834 Gas Valve Coil Set supports 365 days return and exchange.Our company attaches great importance to the shopping experience of each customer.Risk-free shopping, If you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve the problem. Customer satisfaction is our tireless pursuit..
Check Stock

Meadow Lane 3.25' Plastic Clothespins for Air-Drying Clothing (1 Pack, 24 Count)

  • SPEND LESS: Since they handle the same job as your dryer, save tons of money to put towards other bills or something for yourself..
  • USE AGAIN AND AGAIN: The clothes pins are good for multiple uses without ever rusting. Place your clothing on the line and let it dry naturally..
  • REDUCE SHRINKAGE: Since your clothing wonÕt be subjected to the heat of the dryer, you get to worry less about shrinking by letting it dry off from the heat of the sun..
  • USES LESS ELECTRICITY AND GAS: With no need to use your dryer, this method helps to save money on your utility bills..
  • 24 PINS PER PACKAGE: Hang up each towel securely with these heavy-duty clothes pins..
Check Stock

Beaquicy TDIDVKZW Indoor Dryer Vent Kit with 4 Inch by 10 Feet Flexible Clothes Dryer Duct

  • ✅【CHOICE NOT TO BE MISSED】--- The TDIDVKZW Indoor Dryer Vent Kit is for venting electric dryers indoors to trap lint. Due to potentially harmful fu.mes and exhaust gas.es, this item is not recommended for use in gas dryers. Duct has a 4-in diameter and extends to 10-ft in length. The package includes 1 x 4-inch by 10-feet proflex dryer transition duct,1 x plastic lint reservoir, 2 x plastic adjustable clamps. It includes Installation ring so it can be hung close to a dryer on a wall or wall stud..
  • ✅【USER FRIENDLY】---TDIDVKZW Indoor Dryer Vent Kit is for venting electric dryers indoors to trap lint. It is made of quality materials to prevent crushing or other possible damage to the kit. The pipes are flexible and soft, and can be installed quickly and easily, and it can be used when it is connected to the clothes machine. The indoor dryer vent kit is detachable and can be reused after cleaning. Ideal for apartments, condominiums and R.V.s but should not be used with gas clothes dryers..
  • ✅【MADE OF DURABLE MATERIAL】 --- This TDIDVKZW Indoor Dryer Vent Kit is made from durable high quality material to prevent crushing or other possible damage to the kit. Well-tested by the manufacturer, non OEM but quality equal to OEM requirements. High ....
Check Stock

Whirlpool 20-48KITRC Gas Dryer Connector Kit

  • Everything you need to hook up your gas dryer.
  • Includes connection line, 3 fittings and sealant.
Check Stock

383EEL3002D Dryer LP Gas Conversion Kit Replacement Part for LG Kenmore Dryer by Rayhoor- Replaces 383EEL3002D, B00AMF8ETW

  • 【Perfect Replacement】Our 383EEL3002D Dryer LP Gas Conversion Kit replaces part numbers: 1617105, AH3522300, AP5204371, EA3522300, PS3522300, LP11835..
  • 【Widely Applicable】Compatible with most top name brand dryers: LG, Kenmore, Kenmore Elite and others.
  • Fits these models: DLGX5102V, DLGX5102W, RN1317AS, DLG3181W, RN1317TS, 79679002000, 79671553610, DLGX9501K, 79691393610, etc..
  • 【Function】383EEL3002D Dryer LP Conversion Kit converts a natural gas dryer to operate on liquid propane, and the LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer..
  • 【Premium Quality】High quality material and well-tested by the manufacturer designed to fit your dryer perfectly..
  • 【Money-Back Guarantee】If there is anything you are not satisfied, please feel free to contact us and we will offer you a replacement or full refund. High-quality products and service is our priority..
Check Stock

Side Vent Kit 3911EZ9131X for LG Dryer, Venting Kit Assembly 383EEL9001B Compatible with Kenmore/sears, Replacement Part AP4438852 Exhaust Out Either Side or Bottom

  • ✔ [Compatible with Most Models] This dryer side vent kit number 3911EZ9131X (also called 383EEL9001B) compatible with 408 models of LG dryer, and 144 models of Ken-more / Sears dryer. Please refer to Figure 3 for specific models. For use with LG gas dryer model numbers beginning with the prefixes (CDE, CDG, DLA, DLE, DLEX, DLEY, DLG, DLGX, DLGY). For use with Ken-more / Sears gas dryer model numbers beginning with the prefixes (796.61, 796.69, 796.71, 796.79, 796.80, 796.81, 796.82, 796.88, 796.90, 796.91, 796.92, 796.98). There are so many matching models that you must make sure that your dryer model matches this one before purchasing. This is very important important important..
  • ✔ [Venting Kit Assembly Included] : 2 X Straight Tubes, 1 X 90 Degree Elbow, 1 X Cover Plate, 1X Mounting Screw, 1 X Instruction Sheet, 1 X Adhesive Aluminum Foil Tape. Solving the problem that gas dryers cannot be vented on the right left and bottom side. .
  • ✔ [Simple Install by Yourself] This dryer venting kit installation is so simple. You can replace it by yourself with simple tools and have a perfect solution in just 20 minutes. Restoring the normally use of your drye....
Check Stock

EXCELFU Safety-Shield Gas Appliance Line Flexible Dryer Gas Hose Connector Kit - 5/8 In. OD (1/2 In. ID) 1/2 In. MIP X 1/2 In. MIP X 3/4 In. MIP X 48 In. Length Yellow Coated

  • Adapter Included 2 Pcs 5/8 In.OD Flare x 1/2 In. MIP (Tapped 3/8 In. FIP) and 2 Pcs 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP).
  • This gas appliance connector kit are designed for Ranges, Stoves, Furnaces or Boilers.
  • 304 Stainless steel flexible tubing with plated steel end fittings capacity 106,000 BTU.
  • 48 inch long stainless steel corrugated gas range and dryer connector kit are perfect for indoor or outdoor use.
  • This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
Check Stock

Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit

  • ✅【PRODUCT DESCRIPTION】: The STV-90 dryer duct exhaust connector consists of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
  • ✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
  • ✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve t....
Check Stock