IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace
- INCLUDES EVERYTHING FOR INSTALLATION - This Gas Appliances Installation Kit Includes 22” flexible gas line (with 1/2" Female Flare on both end) , 3 different adapters (1/2" Male Flare x 1/2" Male Pipe, 1/2" Male Flare x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
- HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
- it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
- CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
- BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
Check StockMRbrew Efficient Adjustable Beer Faucet Kit, Adjust/Control/Regulate Beer Flow Rate, Heavy Duty Commercial Brewing Kegging Stainless Core Adjustable Draft Kegerator Keg Tap Kit for Beer Tower Shanks
- 1.Include: Beer Keg CO2 Regulator CGA320, Red Gas Line, Worm Clamps, 5/16" Swivel Nuts, Ball Lock Gas Disconnect MFL.
- 2.Material: PVC Material for Gas Line, Stainless Steel Material for Clamps, CO2 Regulator and Swivel Nuts, Plastic Material for Ball Lock Disconnect.
- Connect tips: Tighten the Clamps when it Connects the Beer Gas Line will guarantee no Leak.
- 4.Gas Gauge: 0-60 PSI and 0-3000 PSI, Manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator.
- 5.Guarantee: Quality Guarantee, any problem for CO2 Regulator with ball lock and gas line set, Money Back or Replacement free..
Check StockHoneywell VR8215S1503 1-Stage Direct Ignition Gas Valve
- Dante 8-Inch Universal Gas Valve Key in Flat Black.
- Our unique Dante Universal Key design fits both 1/4-Inch and 5/16-Inch gas valve stems on both of our ball or globe gas valves.
Check StockDesign Toscano Route 66 Gas Pump Big Boy Toy Key Cabinet, 19 Inch, full color
- Route 66 - The mother road to the US Highway system, route 66 ran from the Midwest to California and gas stations, motels, and attractions sprung up to serve the steady stream of travelers.
- Gas Pump - Inspired by the historic gas pumps along route 66, our replica will store the keys to all your toys in your garage, home bar, or man cave.
- High Quality Cabinet - This functional work of art does double duty as a hidden key cabinet. This replica gas pump then hand painted in a retro shade of red with faux aged details.
- Design Toscano Gas Pump - Exclusive to the Design Toscano Brand, this this collectable gas pump cabinet is a wonderful addition to any petrol head's man cave and it makes a great gift for car lovers.
- Our Route 66 Gas Pump Big Boy Toy Key Cabinet measures 6½"Wx3"Dx19"H and weighs 4 lbs. Simple assembly required..
Check Stock10504 Locking Fuel Cap Lock Gas Cap 10504 Compatible with Toyota 4Runner,Tacoma,Tundra,FJ Cruiser,Acura,Chevy Camaro Honda CRV,Infiniti,Isuzu,Mazda,Nissan,Buick,Cadillac and more
- 10504 Locking Fuel Cap RPLACES PART # : 10504 locking gas cap.This locking fuel cap can compatible with Honda, toyota tundra tacoma,Acura, Infiniti,....
- 10504 Locking GAS Cap,COMPATIBLE WITH FOLLOWING VEHICLES : 1999-2002, 2010-2019 4Runner |1999-2004, 2007-2014, 2016 Avalon | 1999-2002, 2007-2016....
- Locking Gas cap, Lock Fuel Cap replace 10504- POWERFUL FUNCTION：High quality material of locking fuel cap could meet or exceed all original....
- LOCK : Turn gas cap clockwise 3 clicks. UNLOCK : Turn key 1/4 turn counterclockwise, don't remove key, then unscrew gas cap. 10504 locking gas....
- 10504 Gas Cap SERVICE: 100% Brand New.If you have any problems about the cap lock for gas ,Please feel free to contact us by email..
Check StockBest Brose 3/4 Tubing Pipe KIT 33ft,Corrugated Stainless Steel Tubing with 2 Male Fittings 33
- 【Sturdy material 】-The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch....
- 【SIZE】 -Length 33FT, 3/4" "pipe size: 16mm inner diameter x 20mmOD (0.625" inner diameter x 0.787 "outer diameter)，Underground gas piping....
- 【INSTALLATION POSTIONS】- gas line For use with Natural Gas and Liquid Propane applications，Connects any outdoor NG appliance to the gas supply....
- 【SCOPE APPLICATION】For use with Natural Gas and Liquid Propane applications，propane fire pit，Natural gas fire pit，gas range，water heater.
- 【MEASILY BEND AROUND CORNERS】- Corrugated Stainless Steel Tubing is great for installation of gas appliances. easily snakes into attic and....
Check StockBest Brose 1/2 Tubing Pipe KIT 70ft,Corrugated Stainless Steel Tubing with 2 Male Fittings 70
- 【Sturdy material 】-The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch....
- 【SIZE】 -Length 66FT, ½ "pipe size: 12mm inner diameter x 16mmOD (0.48" inner diameter x 0.63 "outer diameter)，Underground gas piping systems.
- 【INSTALLATION POSTIONS】- gas line For use with Natural Gas and Liquid Propane applications，Connects any outdoor NG appliance to the gas supply....
- 【SCOPE APPLICATION】For use with Natural Gas and Liquid Propane applications，propane fire pit，Natural gas fire pit，gas range，water heater.
- 【MEASILY BEND AROUND CORNERS】- Corrugated Stainless Steel Tubing is great for installation of gas appliances. easily snakes into attic and....
Check Stock
Slime 40069 Inflation Station, Garage Inflator, Pro-Series, Wall Mounted Air on Demand, Flat to Full in 4 Minutes, Cars, Trucks, Bicycles, 120V,Black
- ...e: 12mm inner diameter x 16mmOD (0.48" inner diameter x 0.63 "outer diameter), so Our natural gas hose can provide up to 100,000 BTU/hour of Flow Capacity, and provide sufficient airflow for larger sizes equipment to meet your more needs..
- 【Application 】- Gas line Used to Connects any indoor/outdoor Natural Gas or Liquid propane applications to the gas supply piping, such as fire pit gas tube, gas range pipe, water heater gas hose,Generator gas tube,Compressor gas tube,Grill gas line.etc.
- 【Sturdy material 】- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, Comes with a 1/2" MALE Brass fittings on both end, Standard Male and Female Pipe Threads for easy connections..
- 【Flexible and Safety】- Corrugated Stainless Steel Tubing is flexible and can be cut into any length you need,easily snakes into attic and basements areas, around corners and bends, Using one-piece molding exquisite Craft, There is no interface in the middle of the pipe body, reducing the connection point and preventing gas....
Check StockStanbroil Natural Gas Connection Fire Pit Installation Hose with 1/2\ Chrome Key and Quarter-Turn Shut-Off Valve
- Include: (2) 60” long black hoses, (1) 1/2” chrome key valve (3” long key)and all necessary fittings..
- Heat and scratch resistant, making them extremely durable..
- Easy to assemble and install natural gas fire pit installation kit with chrome key valve..
- The DIY natural gas fire pit installation kit contains everything you will need to hook-up your fire pit..
- Used with outdoor, vented and natural gas fire pits, barbeque islands, fire pit tables and outdoor fireplaces..
Check StockEXCELFU Flexible Dryer Gas Hose Dryer Gas Appliance Line Connector with Fittings Compatible with 1/2' OD 1/2' MIP x 1/2' FIP Hose Connection, Stainless Steel(6 Feet)
- Hose Fittings are compatible with 1/2" MIP and 1/2" FIP, it can create a secure metal connection for heavy-duty use.
- Designed for gas dryer: This 72" Flexible Stainless Steel Gas Appliance Line is not universal, it is mainly designed for gas dryers and not for ovens or ranges.
- Product Parameters: Inner dimensions of this line are 3/8", Outside dimensions of this line are 1/2".
- Corrugated design: This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
- Easy to install: No tools need to install the piping. It come with male and female iron pipes for easy connections. Make sure you are in need of 1/2 gas piping otherwise this will not fit.
Check Stock
Gas Connector Kit 24 inch Yellow Coated Stainless Steel, 3/8” OD Flexible Gas Hose Connector for Gas Log and Space Heater, 1/2" FIP x 3/8" MIP Stainless Steel Fittings, 24” Gas Appliance Supply Line
- FOR SPACE HEATER AND GAS LOG. This stainless steel gas line hose has a 40,000 BTU capacity, designed as a gas connector for space heaters/gas logs. 24 in. long with a 3/8” outer diameter and 1/4” inner diameter. Includes a 1/2" FIP x 3/8" MIP stainless steel fitting..
- CORRUGATED DESIGN FOR FULL FLEXIBILITY. A corrugated gas appliance gas connector offers maximum flexibility, as the corrugated design makes for a flexible gas hose by allowing to bend and snake the yellow coated gas line connector into small spaces, bends, and corners..
- REINFORCED HEAVY-DUTY QUALITY: Our gas supply connectors are quality tested and CSA certified, to serve you faithfully for years to come. Gas hose withstands 30 bends without leakage and 15 applications of 90 degree twists. Works in temperatures up to 800 degrees. Fittings create a leak-free seal within a torque of 1,040 inch-pounds..
- EASY INSTALLMENT: No special tools required to install this gas connector. Includes stainless steel corrosion-resistant fittings with threaded end connections which easily connect to your gas supply line, and create a secure, leak-free seal..
Check Stock
KELCH 7J200880 Vintage Arctic Cat Quarter Turn Gas Cap With Gauge 5 3/4\ Long
- Excellent Quality ( Not Made in China ) New Satin Flat Matte Black Locking Key Lock Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
- Locking Key Lock Without Slide Cover Satin Flat Matte Black Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are Satin Flat Matte Black steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson 2 Keys included.
- Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock
Weed Warrior Autowinder II Universal Fit String Trimmer Replacement Bump Head
- Autowinder II Bump Head: Replace the bump head of your gas-powered or cordless weed trimmer.
- This replacement part lets you easily load string trimmer line without opening the head by inserting the line and cranking the bump knob.
- Universal Fit: Bump head replacement part is equipped for both gas and cordless trimmers.
- Accommodates up to 16 feet of and fits 80/1000-inch to 105/1000-inch diameter line.
- Universal Fit: Compatible with nearly all brands of gas and cordless string trimmers including Echo, Stihl, Husqvarna, Redmax, Ryobi, Cub Cadet, Weed Eater, Poulan, MTD and more.
- Professional Grade: Find the right replacement parts for your trimmer or weed whacker.
- Our brand-compatible trimmer line, fixed line, bump feed, hybrid and bladed heads are built to the high standards and demanding needs of professional landscapers.
- Weed Warrior: We manufacture high quality universal fit weed wacker trimmer line, heads, and accessories built for extreme toughness through years of detailed research and development both in the lab in in the field.
Check Stock
