Categories

Best Gas Pipe Joint

Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit

  • ... ✅【WIDE COMPATIBILITY】:STV-90 dryer duct exhaust connector 5.5 inches. L x 6 inches. H x 4.25 inches. Suitable for most brand dryers. This dryer hose connector is easy to clean, and the sturdy construction prevents breakage, tearing or other possible damage to the connector. In the air duct joint of the dryer, the silicone seal has strong viscosity and is not easy to fall off, which can form a good seal between the pipe and the joint..
  • ✅【EASY INSTALLATION】:Installation is very simple and requires no additional tools, snap the hose to the STV-90 dryer exhaust connector, place the seal ring on the wall or dryer pipe, and push the connector onto the pipe for quick, gas-tight and easy dryer installation..
Check Stock

Timsec 2Packs AC Copper Pipe Extension Joint Connectors Air Conditioning Pipe Coupling Adapters with Flare Nuts and Connectors Free Welding For Butt Copper Tube Diameter 1/4 6.35mm

  • [100% BRASS ADAPTER] - The AC pipe joint connectors are all made by heavy duty brass, sturdy, durable, corrosion resistant and anti-rust..
  • [SPECIFICATION] - Fit for copper pipe Diameter 1/4" (6.35mm)..
  • [APPLICATION] - The AC pipe jointers are designed to connect two copper pipes without welding. The connection can be tightened with a wrench, sturdy and durable. This flare fittings can also be applied in fuel and gas systems, plumbing, refrigeration, and vacuum applications..
  • [EASY TO INSTALL] - The joint is used to lengthen the AC copper tubes. The DIY projects can be finished by household tools without a special welding machine..
  • [PACKAGE INCLUDES] – The package includes 2pcs solid brass connectors and 4pcs Flare Nuts..
Check Stock

Grehitk Flexible Gas Line Connector for Dryer(3/4 24inch), Gas Hose Connector Kit for Stove, Water Heater, Gas Log, Pipe Diameter 1 in. OD(3/4 in. ID), Connector Size 3/4" FIP.3/4"MIP, Stainless Steel

  • ...04 stainless steel gas connector hose, flexible gas hose supply gas line connector adapter:2 pack 3/4 Inch FIP, 2 pack 3/4 Inch MIP(Tapped 3/8In FIP ), and 1set threaded tape..
  • HIGHLY DURABLE- High quality corrugated stainless steel gas hose with multiple types of threaded joints to create a safe metal connection.Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • It has good air tightness, durability, rust and corrosion resistance..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..
  • EASY TO INSTALL- Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more than 2 minutes. Note: The one side of joint connected to the yellow corrugated pipe cannot be wrapped with raw tape! Otherwise it will cause air leakage!But the other side of the joint should be wrapped..
Check Stock

SoloWilder Fireproof Chimney Webbing Outdoor Camping Stove Flue Protector with 2 Clamps

  • Fiberglass Material: Fiberglass is a new type of synthetic fiber with fire retardant ability. It will only carbonize when the temperature around the fireproof webbing reaches 968F/520℃. It does not burn or melt of its excellent fire-retardant properties. While protecting your tent, it will not leave any dirt on the stovepipe..
  • High-Temperature Resistance: This heat-resistant webbing can be used on the stovepipe for a long time at 752F/400℃ and will not ignite when the instant temperature reaches 1085F/538℃. It has very little heat loss and can be used for a long time..
  • Retractable Clamps: The two clamps we offer can help you fix the fireproof webbing to the stove pipe. The diameter of these 2 clamps is adjustable for stovepipes with a diameter between 2.4-3.5inch. By twisting the nuts, you can easily attach and remove the webbing..
  • Multiple Uses: By using this webbing at the joint between the stove pipe and the tent, you can protect your tent from overheating and catching fire. In addition, it can also be used on the stove pipe above the stove to protect you from burns, and be used in the exhaust pipe, indoor gas pipe, etc..
  • Dimensions: Length 16.4ft/5m, width 2inch/5cm. Weight 13oz..
Check Stock

316 Stainless Steel Compression Tube Fitting Union Straight Adapter Tube Double Ferrule Pipe Fitting Adapter for Pipe 2Pcs Ф1/2

  • 【316 Stainless Steel】 The double ferrule pipe fitting adapter adopt high-quality stainless steel 316 material,the inspection indicators are in line with the standard guaranteed spectrometer..
  • 【Good peformance without welding】The product has simple and firm connection, good sealing, no need for welding, high pressure resistance and vibration resistance..
  • 【Easy to clean】The surface of the joint is finely polished by a special process, the hand feels good and delicate, and the interior is clean and bright..
  • 【Suitable for complicated pipeline connections】Suitable for some complicated pipeline connections that cannot be welded, and can pass through gas, liquid, oil and general corrosion pipeline systems..
  • 【Comply with national standard】 The double ferrule straight‑through joint is a relatively common national standard joint, which serves as a connection between steel pipes..
Check Stock

Shok Blok SB-FPV-40 Water Filter Pressure Regulator Protection Valve for RO & Filter Systems - 1/4\ QC Ports, 40 PSI

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
  • PIPE THREAD SIZE - 3/4" Inlet & 3/4" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1-1/16 inch as shown in the picture’s table..
  • CAUTION - This regulator has 1-1/16" openings for 3/4" gas pipes. The 3/4" gas pipe means interior diameter 3/4" but outside diameter is 1-1/16.
Check Stock

Toolitin Foot Bike Pump Double Cylinder with Electronic Digital Display, High Pressure 160 PSI Floor Bike Pump Fits Presta and Schrader Valve,Floor Air Pump for Ball,Bike,Motorcycle,car

  • ... and effortless when pumping Foot double cylinder High pressure speed rushing, up to 160PSI,accurate to below 150PSI.Inflatable speed of foot pumps almost double the speed of traditional,Which ensures efficient & fast inflation..
  • 【SAFE ANTI-SLIP PEDAL+THREAD AIR PIPE JOINT】: Toolitin foot air pump's pedal adopts anti-slip design to prevent slipping during pumping. The air pipe joint adopts thread design, the pipe can be fixed well, it can be took apart easily, and it can also prevent frostbite which can be used in the cold winter...
  • 【COMPACT & FOLDABLE】: TOOLITIN bike floor pump is designed with folding switch, simple to open and close, and it can be storage easily and small package.This Portable Pump will be easy for carry..
  • 【WIDE RANGE OF APPLICATIONS】:TOOLITIN bicycle air pump is durable and versatile use: suitable for baby carriages gas-filled, wheelchairs, bicycles , mountain bikes,road bikes, motorcycles , electric vehicles , ball inflatable toys, inflatable bathtubs, swimming pool buoys, car，etc., Suitable for indoor and outdoor use..
Check Stock

iSpring 14702 APR40 Pressure Regulator Filter Protection Valve with 1/4\ Quick Connect, 40 Psi, white

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 4" - 8" Water Column.
  • PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as 13/16 inch..
  • CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16"..
  • MARKING - Model: RV47L, Marking: 1/2 PSIG, Po 4" - 8". Inlet pressure 1/2 PSI. Adjustable outlet pressure 4" - 8" Water Column..
  • OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Overall Dimension: 2-7/8” W x 2-1/4” D x 2-1/2” H. This is a small size regulator. Refer to pictures for detailed dimensions..
Check Stock

5/16" Universal Fuel Filters Industrial Tractors Cars Trucks Motorcycles Gas Powered Engine Inline Gas Fuel Line 5 Pack

  • 5/16 " IN-LINE FUEL FILTER— Fuel Filter Fits 5/16 "Oil Pipe-5/16" Joint Or Connector At Each End, Transparent Plastic Shell, Orange Inner Filter, With Metal Brass End Caps On The Top And Bottom Of The Filter, Filter Out Impurities And Precipitation In Gasoline, Reduce Parts Wear And Protect The Engine, Direct Installation, Simple And Convenient..
  • SIZE & APPLICATION—Filter Size: 97mm x 53mm.
  • Diameter Size Of Inlet And Outlet Pipe: 9.3mm. Both Ends Are Connected With 8mm Inner Diameter Fuel Pipe. If The Gas Flows Through The Filter, please Check Through The Design..
  • BROAD COMPATIBILITY—General Fuel Filters Can Be Used For Tractors, Cars, Trucks, Motorcycles, RVs & Any Gasoline Powered Engines.
  • PACKAGE MATCHING— You Will Get 5 PCS 5/16-Inch Fuel Filter.
  • AFTER-SALES SERVICE— If You Are Not Satisfied With Our Fuel Filter, Please Return Them Within 30 Days For A Full Refund. Truly Hassle-Free Shopping Experience!.
Check Stock

Roadformer 5 inch Exhaust Clamp - Lap Joint Exhaust Band Clamps Preformed Stainless Steel (2 Pack)

  • 5" exhaust clamp is to joint 5" OD overlapping into 5" ID. Stainless Steel Band in the width of 3 inch/76 mm, using 12.9 degree high-strength fasteners.
  • Lap joint exhaust clamp is fast, easy and accurate installation, and minimize noise and exhaust gas leak, protect exhaust ends from damaged when fastening.
  • The stepped band stainless steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Exhaust clamp will come with plastic sticker to protect the band.
  • you can use with it or you can remove the protection sticker off before using.
Check Stock

Maxitrol RV48L Natural Gas Pressure Regulator 1/2 FPT Thread 13/16 In and Out Opening 1/2 PSIG In 3 -6 WC Out

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
  • PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 13/16 inches as shown in....
  • CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16", refer....
  • MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column..
  • OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment.....
Check Stock

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

2.5" Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • Universal fitment, Joins 2.5" OD Pipe to 2.5" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. reducing costs and time Significantly..
  • The lap joint clamps 2.5" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.5" lap joint band clamp, you can feel free to conta....
Check Stock