Categories

Best Gas Pressure Spring

M18x1.5 DIN Valve Scuba Adapter with Gauge, Scuba Tank Valve 4500PSI with 22inch Hose for Air Tank PCP Air Rifle Paintball HPA Tank

  • 【High Pressure Resistance】Working pressure up to 20-30 Mpa / 200-300 Bar / 3000-4500 PSI with a gauge to indicate the pressure.
  • 【Two Types of Threads】One-piece DIN valve with two types of external threads, M18x1.5 & 5/8-18UNF.
  • 【Dual Gauge Design】One gauge indicating tank pressure and the other gauge indicating the inline pressure.
  • 【Easy Installation & Quick Release】WIth a 57cm long stainless steel spring protection hose and an 8mm female quick-release coupling plug, to be connected and released from other male fittings within seconds.
  • 【High Compatibility】Mainly used for high-pressure gas cylinders, SCBA gas cylinders, SCUBA diving cylinders or PCP gas cylinders, for air/carbon dioxide filling.
Check Stock

Whitecap G-3120SSC Stainless Steel Gas Spring - 5.5\ to 7.5\

  • PREMIUM GRADE GAS SPRINGS: Made of medical grade 316L stainless steel, our extended length gas springs are built to last and are corrosion and water resistant, and can be installed and stored in any position.
  • SHOCK ABSORBANT: Protection against vibration and light side forces.
  • Minimal friction for the production of lowest extension forces and low breakaway forces.
  • ADJUSTABLE PRESSURE: Each gas spring features a valve inside the cylinder, and pressure can be adjusted by using the depressurizing screw.
  • CERAMPRO offers maximum rust and corrosion resistance of the piston rod which provides the best life cycles. (for standard gas springs) WARRANTY: One year manufacturer warranty..
  • THE BEST IN THE BUSINESS: Since 1919 and over 100 years of experience in production we have evolved into a worldwide premium supplier of gas springs, electric linear actuators, special pneumatics, hydraulic pumps and accessories, dampers, and more.
Check Stock

2 Truck Upfitters 16' Gas Props (15.7' ext, 9.4' Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!

  • CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation..
  • Truck Upfitters Pair of 55 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys..
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must....
Check Stock

Oatey 39012 ABS In-Line Vent 2X2 13/16 Sold as 3 Pack

  • Helps prevent sewer gas from entering your home.
  • Spring-loaded to open with negative pressure and close with positive pressure.
  • Mechanical vent installs on the drain line and vents the line without allowing sewer gas to enter the home.
Check Stock

Gas Struts,Gas Springs,Lift Support,Gas Shocks,Lid Stay,Lid Support,Gas Strut Lid Stay Support Kitchen Cabinet Door Hinge,Soft Close Lid Hinge,Gas Shocks,Toy Box Hinges,150N/33lb/15KG[2 Pack]

  • ...vy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors, Display Table, Cabinets, Toy Box or Storage Box etc..
  • ★Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors, Display Table, Cabinets, Toy Box or Storage Box etc..
  • ★ Pressure:150N / 33lb / 15KG (Per Strut).
  • Length ( hole center to hole center) :9-11/16”.
  • Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″. Please select the correct model strictly according to the data sheet of the detailed picture. The installation must be installed in strict accordance with the size of the installation picture, and the wrong installation size will bend the mountain-shaped hinge fittings on the cabinet door..
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping quality and cushioning performance. 2.The gas spring piston rod is strictly prohibited from rotating to the left. If you need to adjust the direction of the joint, you can only turn it to the right. (Avoid the loss of gas in the cavity) 3.The connection point should be installed flexibly without jamming..
Check Stock

12 Inch 135lb/600N Adjustable Heavy-Duty Gas Shock Strut Spring for Tool Box RV Bed Cabinet Boat Cover Door Lid and Custom Projects Without Mount Bracket.

  • 【PRODUCT FEATURE】The 12in gas spring is PRESSURE-ADJUSTABLE. You can use the wrench included with the package to release the gas inside the gas....
  • 【PLACEMENT】Most used for Heavy-Duty equipment such as bed with a small compartment, outdoor TV Cabinet, marine projects, heavy toolbox lid, camper....
  • 【PARAMETER】Extended Length: 12IN(300mm).Maximum Pressure: 600 N/135Lbs Per Strut.Super Strong and stiff, you couldn't compress them by your hand!!....
  • 【ADJUSTMENT TIPS】 Only release the gas in one-second bursts to avoid releasing too much gas. Repeat the process until the gas strut is behaving as....
  • 【12+1 MONTH REPLACEMENT】Welcome to Click "Ask Seller" BESIDE YOUR ORDER for In-time Assistance if any problem occurs..
Check Stock

Gas Spring Gas Strut Gas Shocks Soft Close Hinges Toy Box Hinges Lift Supports Lid Support Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring Pressure 120N/26lb/12KG[2 Pack]

  • ★ Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one....
  • ★Stable & No Rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.If there is....
  • ★Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors,....
  • Length ( hole center to hole center) :9-11/16''.
  • Travel:3-14/25'' ,Distance between ball mounts compressed:....
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping....
Check Stock

Owfeel M18x1.5 DIN Valve Scuba Adapter with Gauge, Pcp Scuba Tank Valve 4500psi Working Pressure with 22-inch-Long Black Hose for Air Tank, PCP Air Rifle, Paintball, and HPA Tank (M18x1.5 Threads)

  • High Pressure Resistance - It could resist working pressure up to 20-30 Mpa / 200-300 Bar / 3000-4500 PSI, with a gauge to indicate the pressure..
  • Two Types of Threads - One-piece DIN valve has two types of external thread. Sizes: M18x1.5 & 5/8-18UNF. Please check your tank thread before purchasingif you do not know,please contact us..
  • Dual Gauge Design - one gauge indicate tank pressure,the other gauge indicate the inline pressure. WIth 57 cm long stainless steel spring protection hose..
  • Easy Installation and Quick Release - It comes with an 8mm female quick-release coupling plug, and it could be connected and released from other male fittings within seconds..
  • Strong Compatibility - Mainly used for high-pressure gas cylinders, SCBA gas cylinders, SCUBA diving cylinders or PCP gas cylinders, easy to assemble and install, for air/carbon dioxide filling..
Check Stock

Te Deum: Church and Music

  • 【KEEP PRESSURE STEADILY WITHOUT LEAK】MRbrew quality keg party pump works on spring lock principle, durable fully lubricated gas spring washer in pump is not easy to stick and keeps air pressure smoothly, get your beer constantly, hose clamp guarantees no leaks at connection end!.
  • 【NO PAIN OF COMPLEX OPERATIONS】This picnic pump is in a simple construction, easy to use, requires no power, no gas cylinder and no regulator, just put the keg in a bucket of ice and pump the beer out by piston rod handle at your own leisure!.
  • 【LONG-LASTING USE & SAVE YOUR DEPOSIT】MRbrew heavy duty chrome-plated party pump is rock solid, not easy to get rust, easy to clean or lube for next use, good hose length and sturdy. Party was lit, cold beer flowed and much rejoicing to you, benefit parties over and over!.
  • 【MEET YOUR NEEDS OF WIDE USE】MRbrew 4 inch draft beer picnic pump works well for USA domestic beer kegs like Budweiser, Miller, Coors, Molson, Busch, Sam Adams, etc, adds more fun to you at picnic party,welcome party, wedding events, family gatherings, etc!.
  • 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew Keg Party Pump is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!.
Check Stock

DAN SPEED S316 Stainless Steel Vertical Check Valve,Spring Loaded In-line Low Cracking Pressure 2 inch

  • Body Material:Stainless Steel SUS/SS316,Cracking Pressure:4.5 psi.
  • Working Temperature:-51°C to 232°C (-60°F to 450°F),Seals:NBR.
  • Max Pressure:1000 Psi For Water,Oil,Gas (WOG1000),Port Types:BSPP Female x BSPP Female.
  • Vertical check valves may be used for any application. They utilize a spring system which shuts the Disc closed when there is not enough pressure to hold it open by the operating fluid. Fluid pressure in the backwards direction will cause the valve to close to prevent backflow.
  • Check valves are used to help direct flow in one direction.The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols.
Check Stock

20 inch 200 LB Gas Prop Struts Shocks with L Mounting Brackets 20 889 N Lift-Support Gas Spring for Heavy-duty Floor Hatch Trap Door Murphy Bed Suitable Lid Weight 185 - 220lbs 2Pcs Set

  • ✅ Qty (2) 20 Inch 200 lb Gas Struts --Extended Length: 20.04"(510mm), Compressed Length: 12.13"(308mm), Package include: 2× Shocks, 4× L Mounting....
  • ✅20" 200 lb Gas Shocks --Most suitable support weight is between 185 pounds and 220 pounds, if out of this range, we suggest you buy other-pressure....
  • ✅ 20 inch Gas Spring -- Super strong gas shocks can be used on heavy duty travel trailer bed, tonneau cover, Murphy bed, large heavy-duty floor....
  • ✅20 inch 200 Pound Gas Prop Spring -- includes 4* L type mounting brackets so you needn't buy additionally, there are several ways to install these....
  • ✅18 Months Replacement Support -- If you unluckily encounter with missing parts, broken ball connectors or unfit problem, just click "Ask Seller"....
Check Stock

BLACKHORSE-RACING 5 Gallon 20L Metal Gas Tank Can, 2 Pack, Gas Gasoline Fuel Power Emergency Backup Tank with Flexible Spout Metal Steel Tank, Green

  • Each metal gas can is made of 24-gauge hot dip galvanized steel using deep drawn construction so there is no top or side seam and has a double interlock no-weld bottom seam.
  • The gas container has 2 openings: a pressure-relief spring-closing lid for filling, and an actuated pour valve with a flexible 12 inch metal spout for safe, controlled dispensing.
  • The gasoline can has a leakproof, self-closing lid with a nitrile gasket that vents at 5 PSI internal pressure and a baked-on high gloss powder coat finish with trilingual labels.
  • The filler spout and flame arrestors in both openings of the metal safety can have a non-sparking design for flashback protection and a pressure relief cap that allows the container to automatically vent to prevent rupture or explosion in a fire.
  • Each Eagle Type II gas can is leak tested and made in the USA.
Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock