Best Gas Range Fittings
Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece
- ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
- USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
- Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
- BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
- Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
- INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
- Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
- To install fittings, pull up lever on ball lock disconn....
Check StockEZ-Fluid 24" Stainless Steel Corrugated Yellow Epoxy Coated 1/2" MIP x 1/2" FIP Gas Flex,Flexible Natural Gas Connector Hose Supply Line For Gas Pipe,Hot Water Heater,Range,Dryer,Stove(1 Pack)
- EZ-Fluid Stainless Steel Corrugated Flexible Natural Gas Hose Connector Suppy Line Has Yellow coated polymer exterior for extra protection and flexibility.
- EZ-Fluid 3/8" FIP or 1/2" MIP x 1/2" FIP Stainless Steel Corrugated Yellow Epoxy Coated Gas Flex,Flexible Natural Gas Connector Hose Supply Line. CSA certified and ideal for indoor and outdoor use.
- Comes with MIP and FIP flare fittings. Fits on 1/2" FIP Gas valve or 1/2" Flare x 1/2" FIP Gas Valve,Male end Flare Fitting come with 1/2" NPT outter Thread and 3/8" NPT inner Thread..
- Application For residential/commercial tank and Gas tankless ,Hot water Gas heater, boiler, fryer, stove,Dryer,Range,Gas Pipe ,Fire pit ,Grill and more.
- The corrosion-resistant yellow coating protects the product from exposure from harsh weather and certain chemicals.
Check StockGASPRO 3/8-Inch Natural Gas Hose with Quick Connect Fittings Natural Gas Line for Grill Pizza Oven Patio Heater and More 12-Foot
- [ Only For Natural Gas ] Used for connecting natural gas appliances..
- [ Multi-Suitability ] Perfect for Weber natural gas grill, patio heater, pizza oven and more NG appliances..
- [ Flexible Hose ] 12 feet 3/8-inch inside diameter hose with 3/8" male quick disconnect plug x 3/8" female flare..
- [ Brass Fittings ] 3/8" quick connect/release fitting, make it easy to attach and remove this gas hose as needed..
- [ Durable & Safe ] This natural gas grill hose features solid brass fittings and long lasting rubber hose to provide safety and no leakage..
Check StockSÜA - Ligth Duty Welding/Brazing Torch Handle Compatible with Victor Series J + Welding Tips
- READ THIS BEFORE YOU BUY: ***This Torch handle fits ONLY Series W-J Acetylene Tips Compatible with Victor - Series W or W-1 Tips WILL NOT FIT THIS....
- READ THIS BEFORE YOU BUY: ***This Torch Handle has 3/8"-24 (Type "A") Hose Fittings - Twin Hoses with 9/16"-18 (Type "B") Hose Fittings WILL NOT FIT....
- READ THIS BEFORE YOU BUY: ***Please note that this outfit WILL NOT FIT disposable oxygen and fuel gas canisters. It will ONLY fit model MC Acetylene....
- This torch has been designed to cover the full range of light-duty welding and brazing needs. Its size and maneuverability makes it ideal for the....
- Welding Torch Handle, Welding torch handle with 3 welding tips and a full Set that includes.
Check StockMSA 10089321 Calibration Assembly for ALTAIR 4X Multi-Gas Detectors, Includes: Cap, Tube, and Connector, Ensure Detector Stays Calibrated for Maximum Accuracy
- PEN Style Combustible Gas Leak Detector with Gooseneck.
- 40ppm methane sensitivity and bearing defects.
- Trace natural gas lines and fittings for leaks frame to failure.
- Test propane tanks, fittings, lines, and heaters for leaks.
Check StockTL TOOLEGIN Brass Hose Barb Fitting Union/Splicer/Mender/Joiner Assortment Kits 3/16 1/4 5/16 3/8 1/2 5/8 Barbed x Barbed 6pcs
- For use with LP and natural gas, refrigeration, and hydraulic applications.
- Temperature control circuits,pneumatic circuits,cacuum and fluid systems test apparatus,lubricant,coolantlines, Temperature range of -40°F to 160°F (-53°C to 121°C).
- CA360 Brass fittings,CA377 Brass for forged fittings.Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
- NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.
Check StockCAMPLUX ENJOY OUTDOOR LIFE 5L 1.32 GPM Outdoor Portable Propane Gas Tankless Water Heater With 1.2 GPM Water Pump
- CSA approved portable tankless water heater for US &Canada markets. Lowest water pressure start up just need 3.0 PSI! Also works great with Camplux 12V 1.2 GPM water pump. You don't need buy extra accessories,you can get 2 pcs extension hose and fittings,complete pump package all in one..
- Wide comfortable water temperature range from 8℃-46℃ (46.4℉-114.8℉), 1.32 gallons per minute of hot water output, you can get instant on-demand hot water easily ..
- Compact and lightweight size tankless water heaterwith folding handle keeps it out of the way, allowing for a convenient set-up outdoors,great for off-grid,road trips,camping trips..
- Flame failure device, anti-freezing protection,over heating protection,oxygen depletion safety shut-off protection always ensures you wonderful and safety outdoor showers.To avoid gas leakage caused by improper sealing of the water heater, DO NOT TWINE TEFLON TAPE between gas regulator and gas inlet pipe. The tankless water heater will "caught on fire "with improper operation. Always check gas leakage before operation..
Check StockHardkits 69 pcs Brass Hose Barb Fittings Assortment Kits 1/8 3/16 1/4 5/16 3/8 1/2 Barb Splicer & Barb To Male Coupler & Tee
- 【PACKAGE INCLUDES】 -----This Barb Fittings Assortment contains Splicer 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5) ,Barb Tee:1/8"(2) 3/16"(2) 1/4"(2) 5/16"(2) 3/8"(2) 1/2"(2).
- 【PACKAGE INCLUDES】 ----- This npt barb kits contains Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2) &304 stainless steel clamp rings 8 pcs.
- 【CREATE A GOOD SEALING】 ----- NPT barb assortmentUse these hose barb fittings and clamp rings to efficiently connect the flexible tubing or hose. This assorted brass barbed fittings set would allow you to maintain a tight seal..
- 【WIDE APPLICATIONS】 ----- This brass crimp fitting are essential component to prevent leakage of oil, gas, fluid and fuel. Great for industrial use, automotive, aquarium, marine and much more..
- 【HIGH QUALITY】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability,Temperatures range from -40 to 260 F..
Check Stock1/8 NPT Female Brass Bulkhead Fitting Bulkhead Coupling,1.5 Length Tank Fitting
- 1/8" NPT female coupling for connecting 1/4 inch NPT fittings through a bulkhead.
- For use with LP and natural gas, refrigeration, and hydraulic applications.
- 1200 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.
Check StockKinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting
- ...Thicker pipe diameter can transmission gas quickly..
- 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
- 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
- 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appliance or at another location. Test for leaks only with leak test solution. Rinse with clean water after leak testing..
Check StockDOZYANT 24 Feet 1/2 ID Natural Gas Hose Propane Gas Grill Quick Connect/Disconnect Hose Assembly with 3/8 Female Flare by 1/2 Male Flare Adapter for Outdoor NG/Propane Appliance
- 1/2" ID natural gas hose with 1/2" Quick Disconnect Plug Kit x 1/2" Female Flare Fittings. Use to convert outdoor appliance to natural gas supply....
- Comes with 1/2" Male Flare to 3/8" Female Flare Brass fittings, to convert your 3/8" connector propane/natural gas grill.
- Perfect for hooking up weber grill, fire pit, patio heater, pizza oven and portable generator.
- 24-foot durable rubber hose, flexible enough to move your gas device as needed. Quick disconnect feature allow to swiftly disconnect hose.
- Supplies up to 100K BTU/Hr, provide adequate gas flow for 30-in and larger grills.
Check StockGas Connector Kit 24 inch Yellow Coated Stainless Steel, 3/8” OD Flexible Gas Hose Connector for Gas Log and Space Heater, 1/2" FIP x 3/8" MIP Stainless Steel Fittings, 24” Gas Appliance Supply Line
- REINFORCED HEAVY-DUTY QUALITY: Our gas supply connectors are quality tested and CSA certified, to serve you faithfully for years to come. Gas hose withstands 30 bends without leakage and 15 applications of 90 degree twists. Works in temperatures up to 800 degrees. Fittings create a leak-free seal within a torque of 1,040 inch-pounds..
- EASY INSTALLMENT: No special tools required to install this gas connector. Includes stainless steel corrosion-resistant fittings with threaded end connections which easily connect to your gas supply line, and create a secure, leak-free seal..
- ONE YEAR WARRANTY: We stand behind our products to ensure only the best quality materials and product performance. We offer a 1 year limited warranty on all Highcraft gas connectors so you can be protected in case of any misfunction..
Check StockLegines Brass Flare Cap 5/8 Tube OD SAE 45 Degree Flare Fitting Pack of 2
- Flare cap, for terminating/closing pipe end.
- Temperature Range: -65°F to +250°F,-53°C to +120°C.
- Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections.
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock