Aupoko Natural Gas Conversion Kit for Grill 10FT 1/2 ID Natural Gas Quick Connect Hose Natural Gas Regulator 1/2 Quick Connect Disconnect Adapter 3/8 Fitting Convert Propane to Natural Gas

  • 【Natural gas to propane conversion kit】The propane to natural gas conversion kit includes 5.9-inch natural gas regulator hose adapter, 10-foot....
  • 【Two gas regulation modes】5.9" manifold gas regulator hose kit. Note: The original mode of the regulator valve is the propane gas regulator valve....
  • 【CSA certification hose】10 feet 1/2" ID natural gas quick connect hose, Equipped with 1/2" female pipe thread to 1/2" female quick connect....
  • 【Compatible with】Natural gas hose and regulator kit, perfectly suitable for most models of KitchenAid brand gas grills, such as 720-0709,....
  • 【Aupoko service】Customer's satisfaction is our greatest pursuit. If you have any problems during the purchase or use, you can contact us at any....
Check Stock

KitchenAid 710-0003 Natural Gas Hose and Regulator for Gas Grill Conversion

  • This product is a Natural Gas unit and you must have Natural Gas plumbed out to your patio or deck to be able to use this grill.
  • Converts your dual-gas propane grill to natural gas.
  • Converts these KitchenAid grill models to NG: 720-0709, 720-0709B, 720-0709C, 720-0733, 720-0733A, 720-0745, 720-0745A, 720-0745B, 720-0787,....
  • Includes: (1) 10 ft. natural gas hose with quick connector, (1) natural gas regulator, (1) 5.9 in. NG regulator hose, (1) 6 mm wrench, (1) 6 mm nut....
  • Tools needed for installation not included: adjustable wrench, pliers, Phillips screwdriver, pipe wrench, flathead screwdriver, 6 mm socket wrench,....
Check Stock

Camplux 16L Outdoor 4.22 GPM Digital Display Propane Gas Tankless Water Heater

  • Easy To Install -It only takes you 5 minutes to set up and it comes with all necessary accesories.To avoid gas leakage caused by improper sealing of the water heater, DO NOT TWINE TEFLON TAPE between gas regulator and gas inlet pipe. The tankless water heater will "caught on fire "with improper operation. Always check gas leakage before operation..
  • 4.22 Instant Hot Water-It only takes you a few minutes to get 4.22 gallons per minute of instant hot water. The camplux portable water heater lights when water pressure between 4.0-110 PSI, low water pressure is perfect for campings and remote cabins..
  • 6-in-1 Protection Ensure Your Safety-Flame failure device, anti-freezing protection, over heating protection to ensure the family safety. The anti-freezing drain plug discharges the residual water to avoid freezing in cold areas for long-time maintenance. Gas supply automatically shut off when high water temperature protection over 167 °F..
  • Power Efficient & Energey Saving -Maximum power output 11,000btu/hour, you will get instant endless hot water easily wherever you are. Compact and lightweight structure with 11.5% energy saving technology. The propane water heater exchanger and main burner are desinged with advanced combustion technology to decrease ga....
Check Stock

PIILOO Portable Propane Forge Single Burner Furnace for Blacksmith Tong Knife Farrier Tool Forging Making Large Capacity

  • Structure--Internal large capacity (7.5"x10"x6.3") with oval design, provide the largest working space, suitable for various small forging works. Full size thick refractory bricks (4.5" x 9" x 1.25"), placed at the bottom of the forging furnace, serves as a solid base for the metal stock..
  • Rapid Heating--High efficient single forge burner can easily heat metal stocks to 2300+ °F / 1260+ °C. Oval-shaped forging wall can help heat the workpiece uniformly, improve efficiency and save your time..
  • Easy-Regulation--Equipped with gas pressure regulator with a rating of 0-20 PSIG, can provide excellent neutral flame and easily adjust the flame temperature. 55.9 inch hose pipe can keep the gas tank away from the hot temperature to ensure safety..
  • Superior Heat Insulation--Equipped with 1 inch thick high density ceramic fiber blanket, which can withstand temperature up to 2000+ °F, provides excellent heat insulation performance, reduces fuel consumption and increases propane forge’s service life..
  • Package Includes--1X portable propane forge, 1X burner assembly, 1X ceramic fiber blanket, 1X gas pressure regulator & hose pipe, 1X firebrick..
Check Stock

Welding Gas Regulator Valve CO2 Gas Regulator Flowmeter Brass Welding Regulator Valve Brass Flowmeter Gas MIG Welding TIG Welding Equipment

  • 0 to 25LPM Output Flow: The output flow of CO2 gas regulator is adjustable from 0 to 25lpm. and represented by a ball moving up and down in flow tube..
  • Reliable Flowmeter: This flowmeter does not use a diaphragm and therefore more reliable than a flowmeter style regulator..
  • Application: Welding gas regulator valve is a kind of TIG welding accessory which is perfect for most welders..
  • Material: The body material is brass that brass flowmeter has excellent ductility. Can be used with peace of mind.
  • Parameter: Welding regulator valve output flow range is 0-25LPM, pressure gauge range is 0-3500psi,threaded connection is 5/8in x 18 male connector and the air pipe interface is 1/4in..
Check Stock

Lab Bunsen Burner, Air & Gas Adjustment with Flame Stabilizer for Natural Gas & Propane & Lab Heating

  • Bunsen burner is one of the high temperature heating tools commonly used in scientific laboratories. The Bunsen burner can safely burn gaseous fuel, and the flame does not flow back into the gas supply pipe. Gas or natural gas, propane gas, etc. are usually used for fuel..
  • Bunsen burners can be used to heat non-combustible objects or solutions. It can be used to heat objects to very high temperatures. The maximum temperature can be close to 1200 °C. Because the operating temperature is higher than the alcohol lamp, the material of the lamp must use a heat-resistant metal..
  • To connect to the burner, please use a gas hose with inner diameter of 8-9 mm (5/16" or 3/8")..
  • With gas regulator, air intake regulator, and flame stabilizer.Can be used with natural gas and liquid propane.Flame Adjustable: Needle valve fitted above the base can realize easily control the flame, Multiple flames for multiple purpose..
  • Base diameter - 7.8cm/3.07in, height - 17.5cm/6.89in Materail: Zinc alloy base & copper tube, Weight: Approx. 224g.
Check Stock

H.A.K. PNEUMATIC Air Filter Regulator – ½” NPT Poly Bowl Compressed Air, Water Filter Lubricator Combo | Water/Oil Trap Separator | 0-140PSI | 2 Micron Brass Element

  • PRESSURE REGULATOR: The speed and precision of air flow are controlled by a Regulator, while the air that passes from the Compressor is cleaned by an Air Filter. The Two Brass pipe fitting available..
  • EFFECTIVE AIR FILTER: H.A.K. PNEUMATIC Air Compressor Regulator Filters the moisture and tiny particles from the air to preserve air tools including spray guns, nailers, airbrushes, tyre compressors, inflators, and pneumatic equipment. The air flow direction has mentioned in the images. Air in from Left side and get out from right side..
  • EASY TO INSTALL This Pressure gauge comes with Good Impact Locking Composite Knob Inlet Outlet Port to Indicate Position Circulation. Compressed Air Gas Water Filter also have Two 1/2" Brass Pipe Fitting Straight Connector Adapters and Tread seal Teflon tape..
  • AUTO LUBRICATION & PRESSURE RANGE: The lubricator plate allows atomized oil to be delivered to lubricant air tools to improve durability and work efficiency. The Pressure range of our Pressure Regulator is 0~140PSI & Rated flow is 500L/MIN. There is an option of adjusting the air pressure..
  • CUSTOMER'S SATISFACTION: We guarantee everything we make. Our Primary Priority here at H.A.K. PNEUMATIC is your happiness &100% Satisfaction, which means we stand by our Air Filter....
Check Stock

MEANLIN MEASURE 1/4 Inch Air Compressor Regulator with Gauge 0-180 PSI Air Gauge Regulator Inline for Air Compressor and Pneumatic Tools Four-way valve

  • 【Easy to Read】This regulator comes with a 0~180Psi dial gauge, Makes adjusting your pressure values a piece of cake..
  • 【Port Size】The air regulator has 4 holes,Three holes of 1/4" and one Gauge Port 1/8"..
  • 【Adjustment Knob】The air pressure regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings..
  • 【Accurate Measurement】The air compressor pressure regulator Provides accurate gas flow regulation and Accurately measures gases..
  • 【Package included】1 x Air Pressure Regulator (Four-way valve), 1x Dial gauge for the 1/8" ,1 x Valve Shut Off Switch, 1 × 1/4" × 1/4" Male Pipe,....
Check Stock

MEANLIN MEASURE 1/4 Inch NPT Air Compressor Regulator with Gauge, 0-150 PSI AR2000 Air Gauge Regulator Inline for Air Compressor and Pneumatic Tools

  • 【Easy to Read】This regulator comes with a 0~150Psi dial gauge, Makes adjusting your pressure values a piece of cake..
  • 【Port Size】The air regulator has 3 holes,Two holes of 1/4" NPT and one Gauge Port 1/8" NPT..
  • 【Adjustment Knob】The air pressure regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings, knob with a lock function, and cannot be turned when the knob is pressed..
  • 【Accurate Measurement】The air compressor pressure regulator Provides accurate gas flow regulation and Accurately measures gases..
  • 【Package included】1 x AR2000(Air Pressure Regulator), 1x Dial gauge for the 1/8" NPT,1 x Valve Shut Off Switch, 2 × 1/4" × 1/4" NPT Male Pipe, 1 × Nickel-plated Iron Air Plug, 1 × Nickel-plated Iron Air Coupler, 1 × Teflon tape..
Check Stock

CGA580 Argon CO2 Regulators Argon Gauges Gas Welding Regulator Compatible with Mig Tig Miller Lincoln Weld 0-4500PSI / 0-10BAR - CO2 Argon Regulator with 6.6Ft Hose

  • Universal Gas Welding Regulator - This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). Argon gauge 0 to 4500 PSI, argon gauge regulator provides accurate regulation of gas flow. This Gas Hose Is Ideal For Fitting Mig And Tig Welding. Ideal for commercial, industrial and laboratory applications.
  • 100% Brand New Argon Regulator with Hose - The CO2 regulator body is made of brass, Single-stage regulator, built-in pressure overload automatic degassing device. Large T-shaped adjustment handle, easy to adjust the pressure by hand. The flow tube is made of polycarbonate.
  • Accurate Argon Regulator with Pressure Gauge - CGA580 fitting (15/16" Male Thread), 9/16" male thread, 5/8" female thread. Argon gas meter measuring range: 0 to 4500 PSI. Argon CO2 Regulators Gauges Gas Welding Regulator With 6.6Ft Gas Hose. 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
  • Reliable CGA580 Argon CO2 Regulator - The Argon CO2 flowmeter regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings and has an internal safety relief design, Provides a safe environment for car driving. CO2 regulator with 2" dual gauges that will be easy to read.
Check Stock

AJinTeby Gas Grill 5430 Regulator Replacement for Coleman Propane Stove Not Fit for Coleman Roadtrip LXE Grills

  • Regulator only fit for Coleman Triton Portable Propane Gas Camp Stove, Classic Camp Stove with 2 Burners, Fold N Go Stoves Coleman Classic Propane....
  • Propane Grill Connector: Premium low-pressure propane grill regulator. Gas Grill 5430 Regulator Replacement for Coleman Propane Stove.
  • Easy Installation - The stove regulator replacement is easy to install and operate. This replacement propane gas regulator keep your stoves running....
  • Great Replacement - Made of stainless steel and solid brass, it is sturdy, long-lasting. This propane gas regulator maintains steady propane gas....
  • Check the user manual of your Coleman stove to see if it is compatible with this gas stove regulator. Note: NOT fit for Coleman Roadtrip LXE Grills..
Check Stock

Marey GA5PORT Portable Propane Gas Tankless Water Heater, Small, White

  • Naturally vented outdoors: you don't need to buy a extra venting.
  • Serves to a variety of applications, since washing your car, windows cleaning, wash your horse or your dog and take a hot shower.
  • Perfect for campsites, cabins, remote areas or just around the house. BTU/h - 35000 BTU/h. Fuel Type - LPG(liquid propane gas). pipe fittings - 1/2 inch NPT, incoming/outgoing water and gas.
  • Provide endless hot water on demand only as needed.
  • Includes a gas hose with csa approved regulator for attaching to a standard liquid propane tank.
  • Portable water heater by Marey has a compact design and light weight saves space and is easy to carry anywhere.
Check Stock

WindMax HS5701B 30 Inchs Black Titanium Stainless Steel 5 Burners Built-In Stoves NG/LPG Cooktop Cookware, 30L20W, 50 Pound

  • -This cooktops is Default NG gas ,Built-In.
  • Bunner Cap: Iron. With 1.8m Power Cable,No. of Gas Burner: 5.
  • Panel Dimention: 30 X 19.69 inch (76*50)CM (L*W).
  • -The Gas Cooktops Gas Type: LPG/NG. (Default NG ,if you want to connect with LPG gas, please remove the NG gas kit).
  • -This gas stove's Cast iron burner grates provides durability and long lasting easy to clean finish.
  • -Note:We have the LPG Conversion screws kit Except Gas pipe and LPG REGULATOR ..
  • -Pls note: All the steel stainless items can not be cleaned with corrosive chemicals, such as strong acids,strong alkalies etc.
  • And in case of scratches, frictional cleaning materials like steel wool shall not be used..
  • -The gas cooktop stove delivers the maximum 34969BTU power to propane and natural gas (Default Natural gas). Capable for multi-purpose such as RVs, big kitchen, cooking lover family, etc. (Both LPG/NG Nozzles Included)..
Check Stock