C16-08053 20 inch Force 80 Lbs/356 N Per Shock Gas Prop Struts 20' for Tonneau Cover Boat Engine Cover RV Basement Door Bed Cover Large TV Cabinet Lid Camper Kitchen Door Qty(2) by Motion18

  • 【SET OF 2 Gas Spring Struts】Extended Length (Center-to-Center): 19.7in (500mm).Compressed Length (Center-to-Center): 11.8in (300mm), Force 80 Lbs (356 N). Per Strut. End fitting: 10MM Ball Stud Mounting Bracket..
  • 【FREE YOUR HANDS】 Gas Prop Shocks for Small Compartment RV Bed with Lightweight Mattress, Truck Tonneau Cover, Outdoor TV Cabinet, Shed Window, and other DIY applications such as Trap door, Heavy Duty Box lid, Wooden hatch door, Large TV cabinet..
  • 【EASY TO INSTALL】After installation, these lid/cover will lift safely and smoothly using ONLY ONE finger. If you purchase this shock as a direct replacement for Tonneau Cover or RV Bed, please measure the length from the center of the socket to the center of the socket before purchasing..
  • 【Warm Tips】 You couldn’t compress it by your hand! Suitable for lids or doors weighing between 64lb and 88lb.Most suitable LID SIDE LENGTH IS MORE THAN 45 INCH..
  • 【SATISFACTORY SERVICE】When you buy gas struts, we will provide you with professional customer service both before and after your purchase and you could also get our 36-MONTHS guarantee. And don’t forget our lifetime customer support!.
Check Stock

Olsa Tools 1/2-Inch, 3/8-Inch & 1/4-Inch Drive Aluminum Socket Organizer | Professional Quality Socket Holder (Blue)

  • ... you wish (they fit on both sides of the rail) then mount your sockets on the locking clips and take your rail wherever you need it..
  • ★ QUICK AND EASY SOCKET ORGANIZATION - Take your rails with you no matter where your next job is! The socket clips on these rails are built with strong ABS clips that have spring-loaded ball bearings to hold your sockets firmly and securely..
  • ★ SPRING LOADED CLIPS - Enjoy the peace of mind knowing that your sockets will be held securely in place. The socket clips on these rails are built with spring loaded ball bearings to hold your sockets firmly and securely..
Check Stock

Whitecap Industries G-3460SSC Stainless Steel Gas Spring - 12\ to 20\

  • 【Material】 - M8 thread is made of PA66A5,simple design, good quality, durable..
  • 【Feature】 - Gas spring strut joint connector end fitting..
  • 【Advantage】 - Gas spring end fitting connector can be used over and over again,easy removal..
  • 【Application】 - Gas spring end fitting connector is a good replacement of gas springs ball strut, and the gas springs are ideal motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies..
Check Stock

Olsa Tools 3/8-Inch Drive Aluminum Socket Organizer | Professional Quality Socket Holder RED

  • ★ PREMIUM SOCKET ORGANIZER - The Olsa Tools 3/8 inch drive socket holder is at the forefront of socket storage innovation. Easily organize all your....
  • ★ HIGH CAPACITY - This organizer for sockets is equipped with 18 3/8" drive ball bearing clips that will hold and secure your sockets under heavy....
  • ★ HEAVY DUTY - Engineered with high grade annodized aluminum rails and impact resistant ABS clips with steel ball bearings. The Olsa Tools socket....
  • ★ QUICK AND EASY SOCKET ORGANIZATION - Organize your sockets quickly and easily with this hassle-free holder for sockets..
  • ★ SPRING LOADED CLIPS - Enjoy your peace of mind knowing that your sockets will be held securely in place. The socket clips on these rails are built....
Check Stock

SUSPA C16-04270 Gas Spring (set of 2)

  • Package Content: 5Pcs x Gas Spring End Fitting.
  • Gas Spring Strut Joint connector End Fitting..
  • It is a good replacement of gas springs Ball Strut, and the gas springs are motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies..
Check Stock

2 Truck Upfitters 17 Gas Props 17.1 Extended 9.9 Compressed 45 pounds of Pressure ea for are ATC Snugtop Leer Camper Shell/Truck Cap Rear Door Measurement Required! Incl 4 Ball mounts!

  • CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL....
  • Truck Upfitters Pair of 45 pound (each) gas struts. 17.1" extended length and 9.9" compressed length. This size of door shock absorber is for tall....
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened &....
  • Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and....
  • Equivalent to Suspa # C16-04270 or Stabilus # 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap....
Check Stock

2 Truck Upfitters 20

  • CHECK YOUR LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL ARE TONNEAU COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!.
  • Truck Upfitters Pair (2 total) of 110 pound (each) gas struts. 19.7″ extended length and 11.8″ compressed length. Most commonly used for ARE brand and ARE style Tonneau covers with lift assist arms. Fits other similar brand of fiberglass tonneau covers /truck lids, but measurement is required to ensure fit..
  • These do not fit all fiberglass tonneau models. Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement..
  • Comes with four threaded 10mm ball mounts and nuts for alternate ‘other than tonneau cover’ applications. Equivalent to Suspa #C16-17796. Prime! Free Shipping! In Stock!.
  • Fits most ARE Shortbed and Longbed (5.5-8.0′) Truck Tonneau Covers with Lift Assist Arms..
Check Stock

JR Products GSNI-5300-10 Gas Spring

  • AN ALL IN ONE KIT: Our Bansbach Easylift Gas Spring Kit includes ball sockets and brackets for tonneau covers, hatches, lid support, and other projects.
  • HEAVY DUTY AND ULTRA SHOCK ABSORBANT: Our gas springs offer protection against unwanted vibration and light side forces with minimal friction for smooth movement.
  • BUILT TO LAST: Precision crafted from durable materials, our powder coated cylinders and CeramPro piston rods make our professional grade gas springs resistant to corrosion caused by rust, water, heat, and moisture.
  • ENDLESS VARIATIONS: We offer a wide range of styles, and our gas spring kits are available with fast, normal, and slow extension speeds and accessories for every project including automotive, industrial, and other applications.
  • THE BEST IN THE BUSINESS: With over 100 years of experience in production we have evolved into a worldwide premium supplier of gas springs, electric linear actuators, special pneumatics, hydraulic pumps and accessories, and dampers.
Check Stock

JR Products BR-1020 10mm Flat Gas Spring Mounting Bracket

  • AN ALL IN ONE KIT: Our Bansbach Easylift Gas Spring Kit includes ball sockets and brackets for tonneau covers, hatches, lid support, and other projects.
  • HEAVY DUTY AND ULTRA SHOCK ABSORBANT: Our gas springs offer protection against unwanted vibration and light side forces with minimal friction for smooth movement.
  • BUILT TO LAST: Precision crafted from durable materials, our powder coated cylinders and CeramPro piston rods make our professional grade gas springs resistant to corrosion caused by rust, water, heat, and moisture.
  • ENDLESS VARIATIONS: We offer a wide range of styles, and our gas spring kits are available with fast, normal, and slow extension speeds and accessories for every project including automotive, industrial, and other applications.
  • THE BEST IN THE BUSINESS: With over 100 years of experience in production we have evolved into a worldwide premium supplier of gas springs, electric linear actuators, special pneumatics, hydraulic pumps and accessories, and dampers.
Check Stock

Drixet 3/8 & 1/2-Inch Drive Impact Universal Swivel Joint Set | 2Pc Cr-Mo Ball Type Flexible Wobble U-Joint Socket Adapters for Hard to Reach Nuts/Bolts

  • ...me-Moly - Length: (3/8") 2" (1/2")-2.5" - Weight: 10 oz..
  • QUALITY: Heavy Duty Rust-Free Rotating Impact Swivels are Made in Taiwan From Drop Forged Heat-Treated Chrome Molybdenum Cr-Mo Steel ensuring a long lasting life without breaking or shattering - Meets and exceeds ANSI/ASME standards..
  • DESIGN: Innovative Ball Spring Design enables 360 Degree Rotation to reach into the hardest spots easily - Finished with Black Phosphate for Ultimate Durability - Spring Ball Bearings holds Sockets Securely on male end - Drive Hole on Female side Locks onto Drive Tang..
  • USES: Useful Wobble Socket Adapters for the Professional Mechanic Workshop, Handyman & Builder to use it with any Cordless/Electric Impact, Torque, & Ratcheting Wrench or Breaker Bar - Useful on Bikes, Automotive Engines, Spark Plugs, O2 Sensor Shields, Exhaust Manifolds, Ball Joints, Stubborn Tire Lug Nuts, Rusty Brake/Suspension Bolts.DescriptionAbout The Drixet Universal Impact Socket Flexible Joint Extender Set with Dr. Sizes 3-8" & 1-2".
Check Stock

HORUSDY 3-Piece Flexible Socket Extension Bar Set 1/2 1/4 3/8 Shaft Drive 10 8 6

  • Durable Chrome-Vanadium anvil and anvil-receiver with mirror chrome finish.
  • Easily solve the repair the car engine stricture uninstall screw, professional deal with ordinary screwdriver can not reach the corners and stenosis..
  • Spring-loaded ball detents lock in to prevent parts from slipping into machinery.
  • Square drive radius corners reduce tool and socket wear.
  • Maintains excellent rotational torque-transfer from ratchet to socket.
  • Heavy-duty wound spring-steel provides flexibility to 45-degrees.
  • Can be connected to an electric drill, rechargeable electric drill or manual wrench,stricture, reaches to them unable to arrive at the twist the....
Check Stock

Charchendo Tablet Holder for Spin Bike, Universal Handlebar Phone Mount with Gooseneck for Stationary Exercise Bike, Elliptical, Compatible with iPad Pro/Air/Mini, Smartphones More Devices 4-13''

  • ...ommercial applications, where downtime is not an option. The all metal clamp, metal arms, & metal ball and socket connections couple with a lightweight engineered polymer tablet cradle is the optimal solution for commercial applications..
  • TABLET COMPATIBLITY - Our spring loaded cradle coupled with 1.25" deep grips accommodates most all tablets on the market even with thick protective cases. Compatible with iPad Mini, iPad 10.2, iPad Pro 12.9, Surface Pro, Surface Go, Samsung Galaxies and everything in between..
  • CLAMP COMPATIBLITY - Tackform's Mega Clamp Tablet Mount will securely hold round bars up to 2" in diameter or table up to 2" thick..
  • 4.75" METAL ARM W/ DUAL METAL BALL AND SOCKET CONNECTIONS - Not all ball and sockets are created equal. Metal ball and socket connections can securely lock into place for a slip free hold while riding. With a simple half turn of the adjustment knob you can loosen, reposition, and relock into place. Dual ball and socket joints allow for a huge range of motion for the perfect viewing angle regardless of your application..
Check Stock

NINGHE 2X Rear Back LIFTGATE LIFT SUPPORT Compatible With JEEP GRAND CHEROKEE 10-05 Type With Ball Socket Ends Gas Strut Cylinder Spring Prop Rod Shock trunk hatch tailgate Lid, NINGHE-4B-846816

  • 2X Rear Back LIFTGATE LIFT SUPPORT Compatible With JEEP GRAND CHEROKEE 10 - 05 Type With Ball Socket Ends Gas Strut Cylinder Spring Prop Rod Shock trunk hatch tailgate Lid.
  • Ext Length (IN) 20-Comp Length (IN) 12.03.
  • High quality standards,Widest coverage in the industry.
  • NOTICE - We provide one YEAR WARRANTY for all our lift supports. Replaced with these in just a couple of minutes,your vehicle fully opens by itself like it used to do when new.
  • Easy to install,No special tools required.
Check Stock