Categories

Best Gas Welding Red Copper

WeldingCity Mild Steel MIG Welding Wire ER70S-6 11-Lb Roll 0.035' (0.9mm) 8'-spool

  • Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas..
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6.
  • spool wrapped in moisture-resistant plastic film..
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm)..
  • Typical element content (wt%) in product: C=0.08.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity 2-pk Mild Steel MIG Welding Wire ER70S-6 11-Lb Spool 0.035\ (0.9mm) 8\-roll | Pack of 2 Rolls

  • Two rolls premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas..
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm)..
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6.
  • wrapped in moisture-resistant plastic film..
  • Typical element content (wt%) in product: C=0.08.
  • Two 11-lb rolls at this price. U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Goplus® 50ft Twin Welding Torch Hose Oxy Acetylene Oxygen Cutting 1/4-Inch 300psi

  • 【Compatible with Both Oxygen and Acetylene】 Our twin gas welding hose is color coded. The green one is for Oxygen and the red one is for Acetylene and fuel gas. What you should note here is that the maximum working pressure of our oxyacetylene twin welding hose is 300psi. Broken pressure up to 900psi..
  • 【High Quality Rubber Material】 Made of high quality rubber material, our rubber welding hose be used on extreme environment. Not only does it have excellent performance in low temperature, even in subzero temperatures, but also has good oil and abrasion resistance, which prolongs the life of the hose in a maximum effect..
  • 【Sufficient Length and Standard Diameter】 The whole length of each welding hose is 50 feet. It is long enough for daily life use or industry and agriculture use. Other than that, with standard diameter, 1/4”, our oxyacetylene twin welding hose has wide application, which meets most people’s needs..
  • 【Multifunctional Twin Welding Hose】 On the one hand, our twin welding hose can be used for welding machine. On the other hand, it has outstanding performance in gas cutting function, as well. Except for that, the twin gas welding hose can also be used for transporting gas, which is a good choice for industry and agriculture....
Check Stock

Weller Mini Butane Torch - WLTBUM2

  • 【Durable】This propane torch hose is made of high-quality brass material, durable, long-distance and high-elastic hose, not easy to wear.Come with automatic ignition device.
  • 【Widely Use】 The propane torch kit can be widely used for precision brazing, pipe welding,processing meat (deburring), thawing pipes, melting ice and snow, barbecues, etc. The maximum temperature can up to 3600℉, suitable for welding 3/4" copper pipes..
  • 【Easy to Use】 Install the end of the welding torch on the gas cylinder, and then turn the bottom knob. It is equipped with Self-lgnition system and a 4.8ft hose to ensure a safe use. The flame output can be easily controlled by rotating the knob to meet the welding needs of different projects..
  • 【Ergonomic Design 】 The hose torch uses a vortex propane design that allows the flame to release maximum heat. The 4.8-feet hose ensures a safe distance between the propane tank and the flame. Ergonomic design, long-term use will not hurt your hands..
  • 【Operation And Tips】Use only MAPP and propane gas.
  • Connection standard: CGA600. Do not use this welding gun for a long time in a closed environment, because it will generate a lot of heat and consume a lot of air during work..
  • Before attaching torch to gas cylinder,check and ma....
Check Stock

Witonics Capacitor Replacement Kit for Hyundai X93W with Soldering Tools

  • Professional contractor grade oxyacetylene welding and brazing outfit.
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Patriot series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

Hose Torch Kit, Propane/MAPP, 5 Ft Hose

  • 【Easy to use】A 3.6ft hose makes it easier to get the map gas torch head into tight places. Hose length of Mapp gas torch provides great reach when the hook is clipped to belts..
  • 【Multipurpose use】Flow control knob near torch head for adjustable flame efficiently.Portable Mapp gas torch suitable for soldering copper pipes, welding, brazing, HVAC, cooking and grill, snow melting, burning steak, heat shrinkage, etc..
  • 【Stable performance】 Auto trigger start igniter makes our hose torch head super fast to light flame for simple one-handed operation.Our Mapp gas torch fuel by Propane, MAPP, MAP-PRO cylinder with CGA600 interface..
  • 【Premium material】The torch head Solid brass regulator is Pressure-regulated, durable Mapp gas torch stainless steel nozzle that withstand high temperature for a hotter, more efficient swirl flame..
  • 【Includes】 Torch head handle | Hose with CGA600 regulator | 2 x o-ring | Instruction Manual | 1 x cylinder clip | 5 x brazing welding rods. Mapp gas torch provides 30-Day full refund and 1-Year Limited Service..
Check Stock

Uniweld KC100P Centurion Weld Braze Outfit with 511 Plastic Carrying Stand brass copper blue

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Centurion series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

Devardi Glass Lampworking, Blowing, Beadmaking COE 104 Beginner Starter Kit - Intermediate

  • 【SPECIFICATION】The highest welding temperature can reach over 1700 degrees. Rugged braided dual line hoses is fit for any standard pressure regulator.The hose has special domestic oxygen and butane (liquefied gas) connectors, which can be directly connected to the torch connector..
  • 【MEET DIFFERENT NEEDS】It is equipped with 5 tips. The size of each tips is different, you can choose different tips according to your needs. Tips provide a wide range of flame lengths and heat output for various metals and thickness..
  • 【WELDING TORCH KIT】This jewelry welding torch is easily maneuvered in areas impossible to reach with conventional torches. Used with acetylene, hydrogen, propane, propylene, map, and natural gas. Great tools for the welding of gold, silver, copper, etc..
  • 【WIDELY APPLICATION】Suitable for welding all kinds of precision products such as goldsilverK goldplatinumpalladium pperlead tin alloy and some other crafts such as welding, jewelry repair and construction, hobbyists, crafts, metal sculpture, glass blowing, and electronics repair and manufacturing..
Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • ...perature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0620FMPOP brazing rods, with more affordable price!.
Check Stock

Miller Electric Gas Welding Outfit,Propane,CC509P,WH100 (MB54A-510LP)

  • This gas welding cutting torch kit is good tool for metalworker doing cutting, welding, heating work..
  • This oxygen & acetylene cutting torch kit are mainly made of heavy duty metal and brass, with high strength, durability features..
  • The cutting torch and handle is constructed with high strength alloy,heavy duty stainless steel and durable brass..
  • The cutting torch and welding kit is great tools for many occasions, such as welding,soldering,brazing,rivet cutting,hard-facing and metal heating process..
  • You will get Cutting Nozzle & Attachment, Cutting Torch, Torch Handle, Tip Cleaner, Spark Lighter, Welding Goggles, Spanner, Copper Joint and English Manual in one storage box..
Check Stock

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection 4-Pack

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Patriot series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

ABN Oxygen & Acetylene Torch Kit – 10 Pc Welding Kit Metal Cutting Torch Kit, Portable Cutting Torch Set Welder Tools

  • OXY ACETYLENE TORCH KIT: The ABN Oxygen Acetylene Torch Kit for Welding and Cutting is a 10 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
  • Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • EASY TO USE: To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
  • CREATING A NEUTRAL FLAME: A neutral flame creates carbon dioxide that purges air from the heated metal for easier cutting and welding.
  • To create a neutral flame, you must find the correct relationship of oxygen to acetylene.
  • After adjusting the pressure and connecting the oxygen and acetylene tank systems to the brazing torch kit, open the acetylene gauge and light the torch.
  • Begin opening the oxygen valve and continue adding oxygen until sharp cones are created at the tip of the portable torch.
Check Stock

bestarc TIG Welding Tungsten Electrode 2% Thoriated 3/32' x 7' (3/32'', Red)

  • 2% Thoriated Tungsten Electrodes for TIG Welding (Red WT20).
  • Good effect of welding stainless steel, adequate for DC welding.
  • Wide application range, suitable for welding stainless steel / carbon steel / copper / iron / nickel and other metals.
  • Longer storage time, sealed vacuum packaging to avoid oxidation.
Check Stock