Categories

Best Gauge Ruler

ADD AN INCH TOOL, Measuring tool for exact measurements in corners, accurate level marking and locks for repeated marks.

  • 【MULTIFUNCTION 3D SADDLE SQUARE 】There are over 10 functions for this woodworking tool: three-dimensional marks, 45°angel and 90°angel limit stop, Dovetail Template, marking gauge for parallel lines, drill gauge, ruler for vertical line and parallel line, T-shaped Scribe, Protractor. 10 in 1 design, this multifunctional 3d carpenters square is more convenient for engineers and carpentar..
  • 【PREMIUM MATERIAL ANGLE RULER】The t square woodworking ruler are made of high-quality aluminum alloy. The real material is non-deformable, anti-drop, anti-corrosion. Compared with other universal angle ruler, 3d square woodworking tools is more durable and longlasting. Even using it for drilling positioning, it still works well and would not break. Also with the fine polishing surface, angle ruler woodworking is comfortable in your hand..
  • 【ACCURATE MEASUREMENT】Laser engraved marking makes the number embedded in aluminum material, so T square ruler will not wear out and never fade.With clear engraving metric scales, Aweohtle t square ruler is accurate and easy to read. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree angles.With 45°& 90°limit stop and 0-90° scale, aluminum angle ruler could allow you t....
Check Stock

StewMac String Action Gauge And Ruler Metric Stainless Steel - Designed by StewMac The Original measuring tool for acoustic and electric guitar and bass setup

  • Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt....
  • Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common....
  • Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
  • String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure....
  • Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20....
Check Stock

Aweohtle Aluminum Alloy Woodworking Square, 3D Mitre Angle Measuring Tool, 45/90 Degree Woodworking Saddle Layout Square for Engineer, Carpenters, Woodworking Gifts

  • 【MULTIFUNCTION 3D SADDLE SQUARE 】There are over 10 functions for this woodworking tool: three-dimensional marks, 45°angel and 90°angel limit stop, Dovetail Template, marking gauge for parallel lines, drill gauge, ruler for vertical line and parallel line, T-shaped Scribe, Protractor. 10 in 1 design, this multifunctional 3d carpenters square is more convenient for engineers and carpentar..
  • 【PREMIUM MATERIAL ANGLE RULER】The t square woodworking ruler are made of high-quality aluminum alloy. The real material is non-deformable, anti-drop, anti-corrosion. Compared with other universal angle ruler, 3d square woodworking tools is more durable and longlasting. Even using it for drilling positioning, it still works well and would not break. Also with the fine polishing surface, angle ruler woodworking is comfortable in your hand..
  • 【ACCURATE MEASUREMENT】Laser engraved marking makes the number embedded in aluminum material, so T square ruler will not wear out and never fade.With clear engraving metric scales, Aweohtle t square ruler is accurate and easy to read. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree angles.With 45°& 90°limit stop and 0-90° scale, aluminum angle ruler could allow you t....
Check Stock

Jiayouy Set of 12 Pieces Luthier Tools Set Guitar Neck Notched Straight Edge 9pcs Guitar Radius Gauge String Action Gauge Ruler Fret Rocker for Guitar and Bass Setup Tool

  • Guitar maintain and repair set: you will get 9 Understring Radius Gauge 1 piece guitar neck notched string measurement ruler 1 piece string action ruler and 1 fret rocker string height gauge, different tools can satisfy your needs easily..
  • The guitar measuring tools are made of stainless steel with smooth edges that have no burrs, anti-rust and scratch-prevent, durable to serve your guitar for a long term..
  • Guitar Neck Notched Straight Edge Designed to check guitar neck straightness of the fretboard and frets, the fret rocker can span over 3 frets and can check if frets are on the same level, works well with most guitar..
  • String action gauge ruler: comes in 8.9 x 5.1 cm/ 3.5 x 2 inch, Pocket-size body, you can take it anywhere. measure string height, bridge height, nut slot depth, bridge slot depth and pickup height..
  • 9 Understring Radius Gauge including: 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius can be applied to measure fret board radius, saddle radius, nut radius from either the top or the bottom radius surface..
Check Stock

Mr. Pen - T Square, T Ruler, 12 inch Metal Ruler, T Square Ruler, Drafting Tools, Architect Ruler, Set Square, Drafting Ruler, Tsquare, Truler, Architectural Triangle, Tee Ruler, L Square, Scale Ruler

  • 【MULTIFUNCTION 3D SADDLE SQUARE 】There are over 10 functions for this woodworking tool: three-dimensional marks, 45°angel and 90°angel limit stop, Dovetail Template, marking gauge for parallel lines, drill gauge, ruler for vertical line and parallel line, T-shaped Scribe, Protractor. 10 in 1 design, this multifunctional 3d carpenters square is more convenient for engineers and carpentar..
  • 【PREMIUM MATERIAL ANGLE RULER】The t square woodworking ruler are made of high-quality aluminum alloy. The real material is non-deformable, anti-drop, anti-corrosion. Compared with other universal angle ruler, 3d square woodworking tools is more durable and longlasting. Even using it for drilling positioning, it still works well and would not break. Also with the fine polishing surface, angle ruler woodworking is comfortable in your hand..
  • 【ACCURATE MEASUREMENT】Laser engraved marking makes the number embedded in aluminum material, so T square ruler will not wear out and never fade.With clear engraving metric scales, Aweohtle t square ruler is accurate and easy to read. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree angles.With 45°& 90°limit stop and 0-90° scale, aluminum angle ruler could allow you t....
Check Stock

VIRTUSALE Contour Gauge 10 Inches Duplicator Tool | Quick and Instant Template Duplications | Profile Marking Gauge | Copy Irregular Shape Wood Marking Tool | Widen Master Outline Plastic Gauge

  • VIRTUSALE PREMIUM CONTOUR DUPLICATIONS GAUGE/ANGLE MEASUREMENT TOOL PACKAGE includes 10inch Contour Gauge x 1, Pencil x 2 and Sharpener x 1..
  • QUICK & INSTANT TEMPLATE TOOL Contour Gauge 2020 comes with Easy-Slide shaped blades that can improve pattern formation of any irregular objects, replicate the shape of mouldings or match cut-outs and also save your time while taking the guesswork out of your cuts..
  • WIDER APPLICATION of Contour Gauge such as corner cutter, measuring irregular objects, tile tools, marking gauge woodworking, wood planking, winding pipes, circular frames, auto metal sheet, ducts or precise tile cut/linoleum installation and duplicates both flat and curved surfaces effectively..
  • INCLUDES INCH & CENTIMETRE RULER marking on profile gauge for perfect measurement. In addition, this quick outline contour gauge duplicator ruler tool is wider than others and can measure counter depth up to 4-inch..
  • HIGH-QUALITY ABS PLASTIC makes this master outline shape duplicator contour gauge/laminate flooring cutter Durable, Great Quality, Tremendous strength, Rustproof. HIGH-QUALITY ASSURANCE - If you have any problem with our contour gauge within a year, please feel free to contact with us..
Check Stock

Intsun 5 Piece Tool Set - Plastic Contour Gauge Duplicator Tools 5/6/10 Premium Aluminum Alloy Multi Angle Measuring Ruler Canvas Tools Bag Quickgauge Master Outline Gauge for Curves & Odd Shapes

  • 5-in-1 Package Includes: 3 x contour gauge duplicators (red: 10in, blue: 6in, green: 5in), 1 x six-sided folding ruler with ceramic tile punch....
  • 5/6/10in Contour Gauge Copy Tools: Made of high quality and durable ABS, its high-density plastic strip (single thickness: 1.5mm) can accurately....
  • Template Tool Ruler: Our newly upgraded six-sided measuring ruler is made of extremely strong and lightweight aluminum alloy. Not only a measuring....
  • Easy to Store & Carry: The messy tools must be annoying to you, so our large carrying bag is just for you. Made of durable 600D polyester (Size: 11.7....
  • Widely Used & Best Gifts: The contour gauge duplicators are designed for winding pipes, circular frames, ducts, and many objects, allows you to easily....
Check Stock

2 Pieces Sewing Gauge Sewing Measuring Tool, 5-in-1 Sliding Gauge Measuring Sewing Ruler Tool Fabric Quilting Ruler for Knitting Crafting Sewing Beginner Supplies

  • T-shaped sliding gauge sewing gauge: the two-side measurement system can be applied to add the seam allowance to the pattern or marking line of the fabric easily and quickly.
  • You can use it for button holes, seam allowance table, DIY process, patchwork, etc..
  • Easy to use and read the numbers and make sewing-life much easier.
  • Measuring ruler: our sewing gauges are marked in inches and centimeters with sliding pointers to meet your different needs, and the surface and edges are smoothed so that you can get accurate measurements without replacement.
  • Multiple usages: our quilting ruler tools are suitable for DIY craft, sewing, patchwork and more, easy to add seam allowances to patterns or mark lines on fabric, can also be applied to mark code spacing and button holes.
  • Practical gift: the 5-in-1 sliding gauge measuring sewing ruler tool is nice sewing supplies, you can send them as gifts for your family members, friends, craft lovers or other people who like DIY crafts, which will bring them a lot of convenience.
  • What you receive: package comes with 2 pieces sliding gauge measuring sewing tools in different styles to meet your sewing needs.
  • The two sliding gauges are made of plastic and metal aluminum, not easy to break or deform, which are light and easy to ....
Check Stock

Sew Tech Premium 5in1 Sliding Sewing Gauge Ruler with Hem Gauge, Seam Gauge, Buttonhole Guage and Circle Function for Accurate Sewing Quilting Measuring and Marking, with a Sewing Seam Ripper

  • 5 Functions in 1 Gauge - Sew Tech sliding sewing gauge is adjustable and super functional, can be used as hem gauge, seam allowance gauge, buttonholes gauge, "T" gauge, and circle compass.
  • Upgraded Locking System - Sew Tech sewing gauge ruler’s sliding part always lock in place securly and keep your desired measurement through our improved locking system, helping to prevent accidental movement of the sliding part and wrong measurement.
  • Accurate Measurements - Sew Tech sliding guage ruler features a clear scale, allowing you to mark even lines easily. The 1/8’, 1/4’, 5/8’ marked in black lines at the end of the sewing rulers helps you to measure and mark precisely.
  • Premium Quality - Sew Tech measuring gauge is made of selected high-quaility plastic, durable and capable for a long time use.
  • An Extra Sewing Seam Ripper Included - Sew Tech sliding gauge is a versatile tool suitable for sewing, quilting, waving, measuring, stitch work. It is a perfect gift set that comes with a sewing seam ripper for your family and friends who love sewing, card-making, paper artworks, or DIY crafts.
Check Stock

TableRe Measure Optical Vernier PD Ruler Pupil Distance Meter Eye Ophthalmic Tool (1 Pack)

  • My PD Ruler is a mm ruler for accurate PD measurements. Just Wear, Slide & Record your PD. Each pack has 2 PD Rulers: for an adult and a child..
  • PD measurement tool adults kids plastic square flexible level distance glasses folding eye care leveler radius gauge millimeter scanner measuring tester centimeter eyeglasses pupillary visual tools pupil optical tracker pd ruler meter vernier home use.
Check Stock

15 Pieces Guitar Luthier Tools Set Including Guitar Radius Gauge, String Action Ruler Gauge, 32 Blades Feeler Gauge, Guitar Notched Radius Gauges for Guitar and Bass Setup

  • Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt your hands, durable for long-term use.
  • Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common distance measuring tool for guitar spacing , the chrome plated main shaft makes it easy to clean up.
  • Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
  • String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure string height, bridge saddle height, saddle slot depth, pickup polepiece height, fret slot depth and nut height.
  • Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20 inch radius, stays parallel to the fingerboard, quickly and accurately find the curvature of a fingerboard or bridge with these radius gauges without taking the strings off.
Check Stock

2 Pieces Sewing Gauge Metal Sliding Gauge Sewing Measuring Tool Quilting Gauge Ruler for Knitting Crafting Sewing Hemming Measuring Beginner Supplies

  • sewing gauge seam quilting measuring knitting sliding ruler sewing diy crafting tool.
  • Package content: there are 2 pieces sewing gauges in 2 different colors in our package, which can meet your various sewing and knitting requirements, or you can prepare them as backup, share with your friends or family members.
  • Reliable to use: this metal sliding gauge is made of stainless steel material, durable and not easy to break or deform, you can use for a long time, the smooth surface and edge will also not scratch your fabric and other materials.
  • Nice functional tool: the sewing measuring tool can keep your work accurately, and the sliding measure sets distance for marking hems, tucks, plates and button holes.
  • This sewing gauge with a sliding marker that will stay in place for repeated marking.
  • Suitable occasions: our quilting gauge ruler is suitable for kinds of sewing crafts, you can use the gauge for sewing, patchwork, quilting, knitting, crochet, embroidery, measuring and checking, help you to get correct information, and bring much convenience for you.
Check Stock

Guitar Neck Notched Straight Edge Luthiers Tool with String Action Ruler Gauge for Gibson 24.75' and Fender 25.5' Electric Guitars

  • The package includes 1 Guitar Neck Notched String Measurement Ruler and 1 String Action Ruler. Perfect accurate action measurements for string instruments such as guitar, bass, mandolin, banjo, etc..
  • Guitar Neck Notched Straight Ruler - Made of stainless steel, rustproof, sturdy enough for your long-term use. Size: 16.5 x 1.45 x 0.13 inch, Weight: 230g. Dual scale design, works well with most guitar, specially suits for Gibson(24.75") and for Fender(25.5") electric guitars.
  • Fritz Ruler - Made of high quality plastic, The ruler is double-sided, there is fraction, decimal, metric conversion chart on back.This guitar string action gauge ruler can measure string height, bridge saddle height, saddle slot depth, fret slot depth and nut height and accurately measure other setup adjustments..
  • The Neck Notched String Measurement Ruler is designed to check guitar neck straightness of the fretboard and frets. Fritz Ruler Use To Measure: Nut / String / Bridge / Pickup Pole Piece / Saddle Height Plus Saddle Slot/ Fret Slot Depths.
  • Excellent Luthier tool and essential for any guitar technician, or guitarist who wants to look after, maintain and repair their instrument themselves..
Check Stock