OrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel, Internal External Grinding for Lathe Drilling Milling Machine
- Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
- High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
- Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.24" / 6 mm - 9.84" / 250 mm, which is suitable for clamping a variety of industrial parts..
- Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
- High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check StockLUMITECO 1/4 Lock on air Chuck,Mini air Compressor Portable tire inflator tire Chuck Hose end with Barb Connector for Hose repair-3Pack
- 90 degree lock-on tire inflator chuck for portable tire inflator, for bike, motorcycle, car.
- 1/4" ID Hose Barb end makes it the perfect choice for hose repairs.
- open flow with a lock-on clamp make it easy for hands free tire inflation.
- 1 all metal air chuck end,2 metal+reinforced air chuck end ,1 free worm gear hose clamp.
- To use the all metal chuck under 170psi,and use the metal+reinforced chuck under 120psi,heavy truck/vehicle forbidden..
Check Stock
CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)
- 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
- 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
- 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
- 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
- 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
- The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....
Check StockPSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
- Includes: (1) Barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) Allen wrench, (8) screws, (1) storage case.
- Barracuda2 chuck body is 3. 5" Diameter and weighs 2.60 lbs..
- pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter.
- #1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8".
- #2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2".
- With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe.
- including bowls, spindles, pens, other small turning projects, and much more.
- Compatible with all additional C-Series Jaws and accessories: 7-3/4" Jumbo Flat Jaws (CJAWFJ2), 5" Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4" Super Finishing Jaws (CJAWXL), and more!.
Check Stock
Shop Fox M1099 10 by 26" Bench athe, Metal, Large
- ...extra 21 tooth change gear (included) you can create every American Standard Metric thread from 0.3 to 8.0 mm pitch..
- Included contents: 32 full page Mini Lathe Users Guide (complete with operation examples, maintenance guidelines, parts diagram, wiring diagram, etc.), Precision 3" (80 mm) 3-jaw self-centering lathe chuck with two sets of jaws and a chuck wrench, Tailstock (13mm) drill chuck with shank and a 6mm drill bit, 8 mm Brazed Carbide RH Turning Tool, MT2 dead center, An 11-gear change gear set that includes a 21 tooth gear for accurate metric threading, Two open end wrenches, Four hex (Allen) wrenches..
- About Us - LittleMachineShop.com is small U.S. business and the premier source of tooling parts and accessories for bench top machinists. We have a direct relationship with the Manufacturer, and we offer full technical support for the machine plus all replacement parts, upgrades and accessories to keep it running for years of service. The 1014 lathe is manufactured by a world leader in lathes and mills and makes metalworking machines for some of the biggest tool brands in the world..
Check StockZ011 3-Jaw Lathe Chuck, 10-35mm Zinc Alloy Mini Lathe Chuck, Self Centering Wood Turning Chuck with Connecting Rod for Mini Lathe, Power Lathe Accessories
- Material: Made up of zinc alloy material, good corrosion resistance, not easy to rust. High strength and hardness, small size, comfortable to wear..
- Clamping Range: The clamping range of this chuck is between 10-35mm(0.39-1.38inch), which is suitable for clamping a variety of industrial parts..
- Application: Design of three jaws, self-centering, widely used for woodworking lathe..
- Accurate: The high precision design of the chuck-bevel gear guarantees the accuracy of the chuck operation..
- Compact Size(D*H): About48x21mm/1.89x0.83inch. The compact chuck is small in volume, easy to use..
Check StockPORTER-CABLE 20V MAX* Hammer Drill, Tool Only (PCC620B),Black Gray
- High performance DEWALT hammer drill delivers 27,200 BPMs.
- The cordless hammer drill has 2-speed gear box (0-400 RPM) for high torque applications (0-1600 RPM) for high speed applications.
- 1/2-inch metal racheting chuck minimizes bit slipping in chuck.
- Battery fuel gauge, belt hook, LED light, (2) magnets for bit storage.
Check Stock
VINWOX SCR4-4 Wood Lathe Chuck, 4-Jaw Self-Centering Chuck, with 1\x8TPI thread & 3/4\x16TPI Adapter, 3 Years Warranty
- ✅Products include: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI and Free Automatic Spring Loaded Center Punch, MAKE SURE check your wood lathe FIT first..
- ✅Internal jaws tighten around workpieces varying from 1-1/2" to 3" (or 3" Square Block). External jaws spread inside of workpieces with pilot holes ranging from 2" to 3-5/8" Included screw chuck provides even more options for supporting your projects.
- ✅4" sturdy steel body with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground and hardened for long and stable service life. All guideways and bearing surfaces are precisely machined.
- ✅Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines.
- ✅Stable Service and Long Life: VINWOX Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life.
Check StockDEWALT Corded Drill with Keyless Chuck, 7.8-Amp,1/2-Inch (DW246)
- Single-sleeve keyless chuck with spindle lock provides greater bit retention and tool-free convenience of the electric drill.
- Triple gear reduction provides increased torque and reduces gear stress for the corded drill.
- DEWALT corded drill has rubber grip and two-finger trigger for increased comfort and greater control.
- Metal gear housing for jobsite durability and increased reliability.
- Helical-cut steel and heat-treated steel gears for long life and durability.
Check Stock
GALAX PRO 2-Speed Drill 20V MAX Lithium-Ion Drill/Driver, 3/8'' Electric Drill with 19+1 Torque Setting, 68 Pieces Accessories Ideal for Home Improvement and DIY Project
- 2-Speed Gearbox: High speed transmission delivers two speeds (0 - 400 / 0 - 1,500 RPM) for a range of fastening and drilling applications. The first gear provides greater torque and control and second gear provides greater speed.
- 19+1 Torque setting & metal chuck: 20V Cordless Drill with 19+1 torque setting that can provides precise control for drilling into stone, wood, metal, plastic, and all screwdriving tasks. A maximum torque at 265 In-lbs is available for tough jobs. The drill has an all metal chuck that locks securely. 3/8'' keyless chuck for efficient changing of drill or screwdriver accessories.
- Lightweight & compact drill: This power and incredibly lightweight drill kit is great for hard-to-reach areas and overhead tasks. Best performance-to-size ratio in its class. This lightweight yet high quality drill helps to reduce fatigue when carrying out time consuming tasks.
- Visibility and forward/reverse functions: The cordless drill driver boasts integrated LED lights for improved visibility, allowing you to work anywhere, anytime, even in dark corners and low-light areas. A forward/reverse control button ....
Check StockGrizzly Industrial T28011 - Bowl-Turning Tool Rest
- High-Precision Three-Jaw Chuck: Ideal for professionals, this mini metal lathe is equipped with a high-precision chuck with 3 jaws able to handle both....
- Digital Display: This miniature lathe includes a digital screen clearly showing the rotational speed, ensuring precise and smooth operation..
- Metal Gear Set: Especially suitable for threading, this wear-resistant and durable set of metal gears provides strong and efficient power transmission....
- 4-Way Tool Post: The lathe's adjustable 4-way tool post allows you to easily change your cutting tools and angles, permitting easy bevelling..
- Large Swing Range: This lathe has a swing over bed of 8.7″ (220 mm) and a swing over cross slide of 29.5″ (750 mm), so you can handle larger....
Check Stock
Knakasaki 28PCS 2 in 1 Corded Impact Drill and Hammer Drill High Powerful Blue
- ...recise Speeds Control?-Lock button of KNakasaki impact drill enables you to lock the speed without a constant grip on the trigger to reduce fatigue. KNakasaki hammer drill has variable speed switch with 17dials knob allowing free speed adjustment, you can screwed with low gear and drill with high gear..
- ?13 MM Keyed Chuck, 360 degree rotating Handle & Depth Gauge?-Its keyed chuck is suitable for drill bits with diameter (=13mm) to meet your requirements for different drill bits. Anti-skid auxiliary handle can rotate 360 degrees, offering greater control, precision, making drilling comfortable and convenient.
- Thoughtful depth gauge makes your drilling more accurate..
- ?Powerful & High-Performance?-KNakasaki hammer drill has copper powerful motor (820W), providing 30 percent more power to easily drill.
- voltage(90V-120V), 7.5Amp, light weight (2kg), compact size (31 x 25 x 7cm). You can set the required speed between 0 and 2800rpm according to your different jobs, delivering powerful impact and hammer strength to complete heavy duty projects on wood, masonry, solid steel and concrete which means that most of the work needs can be met..
- ?Package Includes?-1 x KNakasaki Hammer Drill.
- 3 x Twist drills for steel plate or wall(4/5/6mm),3 x Construction drills fo....
Check StockMILLING INDEXING 4'/ 100 ROTARY TABLE QUALITY PRECISION HORIZONTAL VERTICAL WITH SUITABLE M6 CLAMP KIT & SMALL CHUCK (WITH 65 MM 3 JAWS SELF CENTERING CHUCK)
- Quality Tool Set of 4" Regular Rotary Table with a 65 mm 3 jaws Self Centering Chuck with Back Plate & fixings T nut Bolts & M6 clamp kit.
- Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground..
- Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table..
- It can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero..
- QUICK FAST DELIVERY THROUGH EXPEDITED SERVICE WITH A TRACKABLE AWB NO. TO USA & WORLWIDE..
Check Stock
