Categories

Best Gear Ratio For Speed And Torque

Okuma MK-80WII Makaira Two Speed Elite Lever Drag Big Game Reel

  • MACHINE RIGID CONSTRUCTION – Features 6061-T6 machined aluminum frame, side-plate and spool for maximum durability and strength.
  • CORROSION-RESISTANT COATING – Features Okuma’s CRC: Corrosion-resistant coating process which penetrates and bonds to the metal, which helps significantly toward long term protection..
  • DIAL IT IN WITH TWO 2-SPEED GEARING - Okuma's 2-speed technology incorporates two sets of stainless steel main and pinion gears, allowing anglers the option of a high-speed gear ratio or a powerful low-speed gear ratio for maximum power and torque.
  • DUAL FORCE DRAG SYSTEM - Designed to provide a smooth and powerful drag, the drag mounts on the right side of the spool and uses a Pull Bar Drag System to reduce pressure on the frame and keep everything in perfect alignment. Features Cal’s Drag Grease.
  • MAXIMIZE YOUR DRAG SYSTEM - 17-4 grade stainless steel helical cut gearing and multi-disc carbonite drag system with Cal's drag grease.
Check Stock

Boston Gear HLSK103YR Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel with Hardened Teeth

  • Right hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
  • Bore has keyway and setscrew for use with keyed shaft.
Check Stock

Boston Gear HLSK103YL Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel with Hardened Teeth

  • Left hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
  • Bore has keyway and setscrew for use with keyed shaft.
Check Stock

125cc Air-Cooled Engine 4 Stroke Motor, Manual Clutch Engine Motorcycle Motor Starter Carb Complete Kit for CRF50F 00-09 11-15 CRF50 Z50/XR50 /XR70 1P52FMI Engine

  • Single cylinder, 4-stroke with air-cooled, and clutch operated by hand..
  • ➤【Power】: Max Power: 6.5 kW/7500r/min±375r/min, Max Torque: 8.0 Nm/5000r/min±250r/min.
  • Idle Speed: 1500r/min, Min Fuel Consumption: ≤370g/kw.h, Ignition System: CDI..
  • ➤【Gear Ratio】: Gear Ratio:2.833/1.706/1.238/0.958, Compression Ratio: 9.0:1, Primary Reduction.
  • Ratio: 3.722, Carburetor Type:PZ16J,Transmission:4-speed, Manual clutch, 4 Up.
  • ➤【High performance】: A high performance engine, perfect for those comfortable with faster engines and have a desire to get up and go.
  • Wide range of applications, can be applied for bicycles, models, skateboards and so on. Excellent quality, great bike engine motor accessories..
  • ➤【Fits】: HOMDA CRF50 / CRF70 / XR50 / XR70 / Z50 / Z50R / CT70 Mini Trail / Z50 / Minitrail Monkey / XL70 ST70 / QA50 / QR50 / CL70 / SL70 / 70 Passport / ST 90K2 / ST 90K1 / CS 90 / SL 90 / ZB 50..
Check Stock

125cc Engine 4 Stroke Motor Single cylinder with Air-Cooled Motor Engine Pit Dirt Bike For Honda CRF50 CRF70 XR50 XR70 Dirt Pit Bike Motorcycle Spark Plug A7TC

  • ★【Type】: Single cylinder, 4-stroke with air-cooled, and clutch operated by hand..
  • ★【Power】: Max Power: 6.5 kW/7500r/min±375r/min, Max Torque: 8.0 Nm/5000r/min±250r/min.
  • Idle Speed: 1500r/min, Min Fuel Consumption: ≤370g/kw.h, Ignition System: CDI..
  • ★【Gear Ratio】: Gear Ratio:2.833/1.706/1.238/0.958, Compression Ratio: 9.0:1, Primary Reduction.
  • Ratio: 3.722, Carburetor Type:PZ16J,Transmission:4-speed, Manual clutch, 4 Up.
  • ★【High performance】: A high performance engine, perfect for those comfortable with faster engines and have a desire to get up and go.
  • Wide range of applications, can be applied for bicycles, models, skateboards and so on. Excellent quality, great bike engine motor accessories..
  • ★【Fits】: HOMDA CRF50 / CRF70 / XR50 / XR70 / Z50 / Z50R / CT70 Mini Trail / Z50 / Minitrail Monkey / XL70 ST70 / QA50 / QR50 / CL70 / SL70 / 70 Passport / ST 90K2 / ST 90K1 / CS 90 / SL 90 / ZB 50..
Check Stock

GALAX PRO 2-Speed Drill 20V MAX Lithium-Ion Drill/Driver, 3/8'' Electric Drill with 19+1 Torque Setting, 68 Pieces Accessories Ideal for Home Improvement and DIY Project

  • 2-Speed Gearbox: High speed transmission delivers two speeds (0 - 400 / 0 - 1,500 RPM) for a range of fastening and drilling applications. The first gear provides greater torque and control and second gear provides greater speed.
  • 19+1 Torque setting & metal chuck: 20V Cordless Drill with 19+1 torque setting that can provides precise control for drilling into stone, wood, metal, plastic, and all screwdriving tasks. A maximum torque at 265 In-lbs is available for tough jobs. The drill has an all metal chuck that locks securely. 3/8'' keyless chuck for efficient changing of drill or screwdriver accessories.
  • Lightweight & compact drill: This power and incredibly lightweight drill kit is great for hard-to-reach areas and overhead tasks. Best performance-to-size ratio in its class. This lightweight yet high quality drill helps to reduce fatigue when carrying out time consuming tasks.
  • Visibility and forward/reverse functions: The cordless drill driver boasts integrated LED lights for improved visibility, allowing you to work anywhere, anytime, even in dark corners and low-light areas. A forward/reverse control button ....
Check Stock

Makermotor PN00219 - Compact Grease Lubricated Dual Output Shaft Gearbox 20 to 1 Worm Gear Speed Reducer

  • Maximum Output Torque: 7.8 N-m (5.8 ft-lb).
Check Stock

1/2' Torsional Torque with 3 Free Socket Lug Wrenches, Automotive Tire Wheel Tools Multiplier Wrench Lug Nut Remover Type Car Tire Disassembly Labor-Saving Torque 3200N.M Suitable for most vehicles

  • Easy, professional ---Professional Labor Saving Wrench is a newly designed for car wheel wrench for easy loosen truck tires lug nut or car tires by using less labor to reach a sufficient output torque without impact or Compressor needed..
  • Effortless,durable--Constructed of High Complexing Steel, these torque multipliers are designed for maximum strength and longevity.With a 1:16 gear ratio bringing 800 NM, this lug nut wrench produces powerful output torque, which helps easily loosen and remove large rusty nus or bolts to save both time and labor..
  • 3 Free Socket and Portable Storage Case---Torque wrench multiplier set includes 3 sockets: 17mm, 19mm, 21mm. Heavy-duty plastic blow-molded carrying case provides easy transportation, safe storage, and quick organization..
  • Safety output range---The maximum safety output torque ≥ 3200N.M. Torque Output: 800 Nm, Trans-Speed Ratio: 1:16 1/2", Square Drive 3 sockets in each set: 17mm, 19mm, 21mm.Heavy-duty blow-molded plastic carrying case for quick transportation, simple storage, and organization..
  • Scope of application--- Labor Saving Wrench can be used to disassemble various kinds of tires the easy way. Suitable for most vehicles, such as cars, trucks, buses, RVs, semi-trucks and other heavy duty vehicles etc.....
Check Stock

Variable Speed Electric Gear Motor, AC110V 15W 5K High Torque Single-Phase Gear Reduction Motor 270 RPM/min with Speed Controller

  • 【Main Parameters】- Name: Geared ac motor.
  • 15W Gear Motor: 70mm*70mm*134mm, Axis Length 30mm.
  • 【Wide Applications】- This gear reducer motor is widely used in packaging, printing, textile, dyeing, chemical, food, construction industries. Suitable for advertising, office, instrumentation, stage lighting, automatic warehouse, parking access control system and other equipments..
  • 【Note】- Speed ratio 1:5(270 rpm/min), gearbox without gearbox is 1350 rpm/min.【Warm Tips】Based on the industrial standard, to meet different needs of customers, our motor does not include the power cord, you need to purchase the power cord to connect..
  • 【100% Customer Guarantee】- Our products are shipped from US warehouses, we will ship your order asap through logistics such as UPS/USPS/FedEx. If you have any problems, please feel free to contact us. We will try our best to solve your problem..
Check Stock

X-BULL-winch 13000- Traction products and winches-Synthetic rope winches-13000 pounds load capacity-rc winch- (SUV)

  • 1. Integrated control box, built-in 500A relay and wireless receiver, waterproof grade IP65. Removable installation, you can install according to your own needs, very suitable for daily pulling 2-door jeep and SUV.
  • 2. xbull winch 13000-built-in automatic brake function-to maximize the safety of using the winch. It can hold the car even on a steep slope..
  • 3. The use of a true 3-stage planetary gear set can achieve a larger speed ratio and can achieve coaxial deceleration (speed increase). The torque is greater and the pulling force is greater. 265:1 gear reduction ratio..
  • 4. Nylon rope: The 9.5 mm nylon rope made of ultra-high molecular weight polyethylene has better toughness and tensile strength. The length of 26 meters can be suitable for most terrains..
  • 5、X-bull, all winches come with lifetime technical support and a one-year limited warranty.If there is any issue during the purchase, please feel free to contact us, we will provide professional and timely service.
Check Stock

Planetary Gearbox Nema 23 Ratio 10:1 Gear Head Speed Reducer 1/4\ Input fit for 6.35mm Shaft Stepper Motor CNC Router Lathe DIY(10:1)

  • ★Input shaft hole is 1/4" that can match the 6.35mm shaft motor (without key). The output shaft diameter is 14mm.
  • ★The gear head has Nema 23 Input & output flange,suitable for flange 57mm stepper motor and other motors which can completely match the installation size ..
  • ★Rated speed is 3000RPM, 10:1 gear ratio ,the rated holding torque is 15N.m and the Max. holding torque is 25N.m.
  • ★4pcs screws provide for installation , small size gearbox , very convenient for the machine which has limited space for a gearbox..
  • ★Widely used on kinds of machine , lathe ,engraving machine etc..
Check Stock

TFCFL 125cc Engine 4 Stroke Motor Single cylinder with Air-Cooled Motor Engine Pit Dirt Bike For Honda CRF50 CRF70 XR50 XR70 Dirt Pit Bike Motorcycle Spark Plug A7TC (125cc Engine 4 Stroke) (Black)

  • Single cylinder, 4-stroke with air-cooled, and clutch operated by hand..
  • 【Power】: Max Power: 6.5 kW/7500r/min±375r/min, Max Torque: 8.0 Nm/5000r/min±250r/min.
  • Idle Speed: 1500r/min, Min Fuel Consumption: ≤370g/kw.h, Ignition System: CDI..
  • 【High performance】: A high performance engine, perfect for those comfortable with faster engines and have a desire to get up and go.
  • Wide range of applications, can be applied for bicycles, models, skateboards and so on. Excellent quality, great bike engine motor accessories..
  • 【Gear Ratio】: Gear Ratio:2.833/1.706/1.238/0.958, Compression Ratio: 9.0:1, Primary Reduction.
  • Ratio: 3.722, Carburetor Type:PZ16J,Transmission:4-speed, Manual clutch,1-N-2-3-4.
  • 【Fits】: HONDA CRF50 / CRF70 / XR50 / XR70 / Z50 / Z50R / CT70 Mini Trail / Z50 / Minitrail Monkey / XL70 ST70 / QA50 / QR50 / CL70 / SL70 / 70 Passport / ST 90K2 / ST 90K1 / CS 90 / SL 90 / ZB 50..
Check Stock

T159348 Axle Bevel Gear Aftermarket for John Deere Backhoe Sub. No. 4461351022

  • 16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock