T159348 Axle Bevel Gear Aftermarket for John Deere Backhoe Sub. No. 4461351022
- 16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
- Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
- Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
- Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
- Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check StockMartin HM1230 Miter Gear, 20° Pressure Angle, High Carbon Steel, Inch, 0.540\ Face, 5/8\ Bore Diameter, 2.5\ Pitch Diameter, 2.62\ Outer Diameter, 30 Teeth
- Straight miter gear for transmitting mechanical power between perpendicular shafts.
- High carbon steel for tensile strength and hardness.
- Pressure angle of 20 degrees for a lower contact ratio between gears.
- Hardened teeth for 1:1 gear ratio applications for torque and motion.
Check StockGate Caster Wheel Spring Loaded 4 Inch Swivel Castor 440lbs Capacity with Universal Mount Plate,Fence Gate Wheel
- Left hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
- Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
- Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
- Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion.
Check StockBoston Gear LSA102YR Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.625\ Bore, 12 Pitch, 18 Teeth, Steel
- Right hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
- Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
- Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
- Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion.
Check StockJ.W. Winco 6136015 MC Plastic Cylindrical Handle
- Hand knob: Black phenolic plastic (Duroplast PF).
- Mainly used on threaded shafts such as gear lever arms or as fixed grip handles.
Check StockJ.W. Winco 6136034 MC Plastic Cylindrical Handle
- Hand knob: Black phenolic plastic (Duroplast PF).
- Mainly used on threaded shafts such as gear lever arms or as fixed grip handles.
Check StockFender Pure Vintage 70s Bass Tuning Machines
- Set of four Pure Vintage nickel-plated stamped "clover-leaf" style open-gear tuning machines with mounting screws and bushings Fender stamped onto....
- Tuning machine shafts approximately .55-Inch tall.
- Fits most '70s-era basses will not retrofit to American Standard or American Deluxe basses.
Check StockPoulan PP1000E 7-Inch Pro Lawn Edger Attachment
- Fits most major brand trimmers with detachable shafts.
Check StockHakka Commercial Dough Mixers 10 Quart Stainless Steel Spiral Mixers (DN10)
- Front-mounted controls with 60-minute digital timer and last batch recall.
- Heat-treated hardened steel alloy gears and shafts.
Check StockTamiya 300054114 Crawler Motor CR CR/Tuned 35T
- Radio Control Kit. Durable ladder frame chassis features steel channel and resin crossmembers for high strength.
- Adjustable front and rear leaf spring suspension system equipped with friction dampers.
- 3-speed transmission allows gear changing and realistic low-speed driving.
- Propeller shafts and slipper clutch efficiently transfer power to all wheels.
Check Stock
Complete Tractor 1104-4450 Steering Gear Assembly Compatible with/Replacement for Ford Holland - E0Nn3503Aa E4Nn3503Ca
- Specs: Steering Gear Assembly, Length: 18", Outer Spline: 36, Notes: Manual steering gear w/18" main shaft. Sector shafts use D9NN2N289AA seals, already installed. Steering gear Assembly Compatible With / Replacement Fordiesel and gas applications..
- Compatible with/Replacement forFord/New Holland: 8N3509B, 8N3548B, 8N3575B, X-S.67077.
- Compatible With / Replacement For: Ford/New Holland 2000 Series 3 Cyl 65-74, 2150, 2300, 230A, 2310, 2600V, 2610, 3000 Series 3 Cyl 65-74, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 335, 3400, 3430, 3500, 3550 Indust/Const, 3600V, 3610, 3610NO, 3610V, 3910, 3910R, 3930, 4000 Series 3 Cyl 65-74, 4100, 4110, 4130 3 Cyl 90-99, 4410, 4610, 4630, 4830, 5030, 530A.
- 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement..
- 100% New aftermarket Steering Gear Assembly built to meet OEM specifications for Ford/New Holland.
Check StockStanley Proto J250G Proto 9-Inch Lock Ring Horseshoe Washer Pliers
- For spreading both soft iron horseshoe lock washers used on brakes and tempered steel lock rings used on gear and bearing shafts.
Check StockBoston Gear G485Y-G Bevel Gear, 2:1 Ratio, 0.250\ Bore, 24 Pitch, 36 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Brass
- 36 teeth for use with G485Y-P mating bevel gear in 2:1 gear ratio applications.
- Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
- Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock
