Best Geekworm X820

Geekworm T300 2.5 inch SATA SSD/HDD Shield Storage Expansion Board+T300 Metal Case Compatible with NVIDIA Jetson Nano Developer Kit(A02&B01)

Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
T300 Metal Case with Power & Reset Switch & Camera Holder Compatible with NVIDIA Jetson Nano Developer Kit (A02 & B01) and T300 2.5 inch SATA SSD/HDD Shield.
WiKi for reference: wiki.geekworm.com/T300.
A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
Equipped with power switch and reset switch, and it's reserve the GPIO hole and the installation space of the fan, recommend to use this Noctua NF-A4x20 5V PWM fan, refer to ASIN: B071FNHVXN, you can also use this 5V 4007 cooling fan (ASIN: B07WNH6Y8Y ).

Check Stock

Geekworm LattePanda Alpha/Delta Aluminum Alloy Passive Cooling Armor Case with 4007 5V Cooling Fan Kit for LattePanda Alpha & LattePanda Delta Edition

This is an aluminum alloy armor case with cooling fan designed for LattePanda Alpha and Delta board by Geekworm.
All ports and slots of the case can match with LattePanda Alpha and Delta board perfectly.
The silicone grease is Shin-Etsu Shin-tsu X-23-7921-5, after our test it has excellent thermal conductivity.
Equipped with a 4007 dc 5v cooling fan for installing above the case, the fan dimensions is 40 x 40mm with 32±0.3mm hole. Use the M3 Nylon Screws....
Please pay attention to the fan connections. Installation video and user manual refer to Geekworm WiKi search LP2 Case..

Check Stock

Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard

✔Geekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4.
User manual, refer to Geekworm WiKi search C235..
✔Heatsink dimensions: 54x39x12mm/2.12x1.53x0.47inch.
✔Support install 30mm (3007 or 3010) cooling fan above the heatsink for better heat dissaption.
✔With one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4.
✔The C235 heatsink reserve the space to connect the extermal antenna for CM4. ✔The inclcuded PM2.5x16mm screws length is just for install CM4 module and C235 heatsink, no support CM4 IO board..

Check Stock

Geekworm T300 V1.1 2.5 inch SATA SSD/HDD Shield Storage Expansion Board Compatible with Jetson Nano A02/B01/2GB/4GB Developer Kit

Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
Ideal storage solution for Jetson Nano- 2.5" SATA HDD/SSD Shield.
for the T300 metal case, refer to ASIN: B07W7CNSR8.
for the T130 mSATA SSD shield, refer to ASIN: B088N6VZL8..
A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
Specially-made USB3.1 bridge to connect with Jetson Nano - no additional cables needed.
Intelligent power management - Automatic powering off when system shutdown.

Check Stock

Geekworm Raspberry Pi 4 Aluminum Case, Raspberry Pi 4 Model B Heavy Duty Passive Cooling Metal Case/Housing with Heatsink Pillar for Raspberry Pi 4B Only-Black (P173)

Geekworm Raspberry Pi 4 passive cooling aluminum case - P173 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
Design with good heat dissipation, passive cooling design, net weight up to 184 grams, don't need to install the cooling fan or heatsink, this is a heatsink case..
Access to all ports of Raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable..
Made of high quality aluminum material. Equipped with a copper heatsink to replace the thermal pad at the CPU part, and attach proper silicone grease (not included) on two sides of copper heatsink to get better heat dissipation.
Reserve the TF Card slot for easy access..
Note: The Raspberry Pi 4 Model B is not included in the packing list. for Raspberry Pi 4 PSU: Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..

Check Stock

Geekworm Raspberry Pi Zero 2 W 18650 UPS Expansion Board X306 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Raspberry Pi Zero..
【One-Cell 18650 UPS HAT】Ideal Uninterruptible Power Supply (UPS) solution for Raspberry Pi Zero W/2W, Max 5.1V 4000mA Power Backup with 18650 single cell battery holder.
【3-Port USB HUB】On-board three USB 2.0 Ports.
Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps).
【How to Power】Power via USB Type-C 5V Power In port of X306.
(Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
【Packing List】1 x X306 V1.1 Expansion Board.
Note: not inlcude Raspberry Pi board,18650 battery, GPIO Header & power adapter..
【User Manual】Installation guide and user manual refer to Geekworm WiKi search X306..

Check Stock

Geekworm Raspberry Pi Zero 2 W Soft Router Dual 100M Ethernet Expansion Board X305 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Pi Zero..
【Dual 100M Ethernet】With dual 10/100M Ethernet ports, ideal for soft router applications, fully compatible with OpenWrt without the need for drivers.
【2-Port USB HUB】On-board two USB 2.0 Ports.
Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps).
【How to Power】Power via USB Type-C 5V Power In port of X305.
(Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
【Packing List】1 x X305 V1.2 Expansion Board.
Note: not inlcude Raspberry Pi board & power adapter..
【User Manual】Installation guide and user manual refer to Geekworm WiKi search X305..

Check Stock

Geekworm NASPi V2.0 2.5 inch SATA HDD/SSD NAS Storage Kit + 20W 5V 4A Power Supply with Safe Shutdown Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)

Geekworm NASPi offering an easy and fast way to create your home media center and building NAS or Web server for your raspberry pi 4 with a 2.5 inch SATA HDD/SSD..
NASPi is composed of three parts: X823 storage shield, X-C1 adapter board, heat dissipation system(include X823-A3 metal fan bracket and 4010 PWM fan), and they will be packed into a ALU-case to get a complete NASPi.
How to Power: 5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1).
Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
SSD Thickness Description: NASPi supports SSD with a thickness not exceeding 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thick..
How to Make the PWM Fan Work: PWM fan needs a PWM signal to start working, so need to install shell script (refer to above wiki), If the fan does not work in third-party OS, only remove the yellow wire of fan to let the fan run immediately..

Check Stock

Geekworm Raspberry Pi Zero 2 W SATA Storage, X301 2.5\ SATA HDD/SSD NAS Expansion Board & USB HUB Compatible with Raspberry Pi Zero 2 W / Zero W / Zero WH (Not Include Raspberry Pi & SSD/HDD)

【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W / WH, not support Raspberry Pi Zero..
【2.5" SATA HDD/SSD Shield & USB HUB】Ideal NAS storage solution for Raspberry Pi Zero 2 W/Zero W/WH to support 2.5" SATA HDD/SSD. With 3-port USB HUB..
【How to Power】Power via USB Type-C 5V Power In port of X301.
(Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
【Packing List】1 x X301 V1.0 Expansion Board.
Note: not inlcude Raspberry Pi board, SSGD/HDD & power adapter..
【User Manual】Installation guide & document refer to Geekworm WiKi search X301..

Check Stock

Geekworm NASPi V2.0 2.5 inch SATA HDD/SSD NAS Storage Kit with Safe Shutdown & Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)

Geekworm NASPi offering an easy and fast way to create your home media center and building NAS or Web server for your raspberry pi 4 with a single 2.5 inch SATA HDD/SSD. For the Simplified version with full size HDMI, refer to NASPi-Lite(ASIN:B09J8B7G3W).
Dual SATA refer to NASPi-Gemini(ASIN:B07VXF2HJG).
NASPi is composed of three parts: X823 storage shield, X-C1 adapter board, heat dissipation system(include X823-A3 metal fan bracket and 4010 PWM fan), and they will be packed into a ALU-case(Raspberry Pi 4 Case) to get a complete NASPi.
(X-C1 V2.0 support auto power on function, X-C1 V1.3 doesn't).
How to Power NASPi: 5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1).
Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
SSD thickness description: NASPi supports SSD with a thickness not exceeding 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thickness..
Button switch operation: Press button 1~2 seconds to reboot, 3 seconds to safe shutdown, 8 seconds to force shutdown (need to install shell script firstly).

Check Stock

Geekworm Raspberry Pi 4 mSATA SSD Adapter X857 V2.0, Raspberry Pi 4 Model B X857 V2.0 mSATA SSD Expansion Board USB3.0 Module for Raspberry Pi 4B UASP Supported ONLY

...s up to 1TB mSATA interface SSD hard disk..
√ How to power RPi 4&X857 V2.0: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port.
√ How to power RPi 4&X857 V2.0& X735: 5Vdc +/-5% , Powered by X735 Type-C or DC5525 Jack Power In port.
Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
√ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..
√ Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, refer to Geekworm WiKi search(Does_the_X825/X855_support_USB_boot).

Check Stock

Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD

√ Supports M.2 NGFF 2280 SSD lengths ONLY.
√ UASP supported only, not support TRIM.
√ How to power RPi 4&X862: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port.
√ How to power RPi 4&X862 V2.0& X735: 5Vdc +/-5% , Powered by X735 Type-C or DC Jack Power In port.
Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
√ Matching metal case for RPi 4&X862 V2.0&X735/X708, refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X862 V2.0..
√ Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, refer to Geekworm WiKi search(Does_the_X825/X855_support_USB_boot).
If the SSD is not recoginzed or other issue, refer to X862 FAQ of WiKi..

Check Stock

Geekworm UNO R3 Case | Protective Enclosure ABS Computer Box for Arduino UNO R3/UNO WiFi REV2/UNO REV3- Transparent

This Geekworm design ABS tranparent case is perfect compatible with Arduino UNO R3 development board, UNO WiFi REV2 or UNO REV3. (Arduino UNO Case).
Case Size: 7.5cm x 6cm x 2cm (2.95inch x 2.36inch x 0.78inch).
It is design with two nice "+" holes and 10 "-" holes for cooling system..
It is very easy to install and Mini & attractive body to carry everywhere..
Note: The UNO R3 board is not included in the packing list..
Packing List: 1x UNO R3 ABS Case-Transparent.

Check Stock