Best Geekworm X835

Geekworm Raspberry Pi 4 Aluminum Case, Raspberry Pi 4 Model B Heavy Duty Passive Cooling Metal Case/Housing with Heatsink Pillar for Raspberry Pi 4B Only-Black (P173)

Geekworm Raspberry Pi 4 passive cooling aluminum case - P173 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
Design with good heat dissipation, passive cooling design, net weight up to 184 grams, don't need to install the cooling fan or heatsink, this is a heatsink case..
Access to all ports of Raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable..
Made of high quality aluminum material. Equipped with a copper heatsink to replace the thermal pad at the CPU part, and attach proper silicone grease (not included) on two sides of copper heatsink to get better heat dissipation.
Reserve the TF Card slot for easy access..
Note: The Raspberry Pi 4 Model B is not included in the packing list. for Raspberry Pi 4 PSU: Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..

Check Stock

Geekworm Raspberry Pi Zero 2 W 18650 UPS Expansion Board X306 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Raspberry Pi Zero..
【One-Cell 18650 UPS HAT】Ideal Uninterruptible Power Supply (UPS) solution for Raspberry Pi Zero W/2W, Max 5.1V 4000mA Power Backup with 18650 single cell battery holder.
【3-Port USB HUB】On-board three USB 2.0 Ports.
Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps).
【How to Power】Power via USB Type-C 5V Power In port of X306.
(Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
【Packing List】1 x X306 V1.1 Expansion Board.
Note: not inlcude Raspberry Pi board,18650 battery, GPIO Header & power adapter..
【User Manual】Installation guide and user manual refer to Geekworm WiKi search X306..

Check Stock

Geekworm Raspberry Pi Zero 2 W Soft Router Dual 100M Ethernet Expansion Board X305 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Pi Zero..
【Dual 100M Ethernet】With dual 10/100M Ethernet ports, ideal for soft router applications, fully compatible with OpenWrt without the need for drivers.
【2-Port USB HUB】On-board two USB 2.0 Ports.
Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps).
【How to Power】Power via USB Type-C 5V Power In port of X305.
(Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
【Packing List】1 x X305 V1.2 Expansion Board.
Note: not inlcude Raspberry Pi board & power adapter..
【User Manual】Installation guide and user manual refer to Geekworm WiKi search X305..

Check Stock

Geekworm NASPi V2.0 2.5 inch SATA HDD/SSD NAS Storage Kit + 20W 5V 4A Power Supply with Safe Shutdown Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)

Geekworm NASPi offering an easy and fast way to create your home media center and building NAS or Web server for your raspberry pi 4 with a 2.5 inch SATA HDD/SSD..
NASPi is composed of three parts: X823 storage shield, X-C1 adapter board, heat dissipation system(include X823-A3 metal fan bracket and 4010 PWM fan), and they will be packed into a ALU-case to get a complete NASPi.
How to Power: 5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1).
Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
SSD Thickness Description: NASPi supports SSD with a thickness not exceeding 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thick..
How to Make the PWM Fan Work: PWM fan needs a PWM signal to start working, so need to install shell script (refer to above wiki), If the fan does not work in third-party OS, only remove the yellow wire of fan to let the fan run immediately..

Check Stock

Geekworm Raspberry Pi Zero 2 W SATA Storage, X301 2.5\ SATA HDD/SSD NAS Expansion Board & USB HUB Compatible with Raspberry Pi Zero 2 W / Zero W / Zero WH (Not Include Raspberry Pi & SSD/HDD)

【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W / WH, not support Raspberry Pi Zero..
【2.5" SATA HDD/SSD Shield & USB HUB】Ideal NAS storage solution for Raspberry Pi Zero 2 W/Zero W/WH to support 2.5" SATA HDD/SSD. With 3-port USB HUB..
【How to Power】Power via USB Type-C 5V Power In port of X301.
(Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
【Packing List】1 x X301 V1.0 Expansion Board.
Note: not inlcude Raspberry Pi board, SSGD/HDD & power adapter..
【User Manual】Installation guide & document refer to Geekworm WiKi search X301..

Check Stock

Geekworm NASPi V2.0 2.5 inch SATA HDD/SSD NAS Storage Kit with Safe Shutdown & Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)

Geekworm NASPi offering an easy and fast way to create your home media center and building NAS or Web server for your raspberry pi 4 with a single 2.5 inch SATA HDD/SSD. For the Simplified version with full size HDMI, refer to NASPi-Lite(ASIN:B09J8B7G3W).
Dual SATA refer to NASPi-Gemini(ASIN:B07VXF2HJG).
NASPi is composed of three parts: X823 storage shield, X-C1 adapter board, heat dissipation system(include X823-A3 metal fan bracket and 4010 PWM fan), and they will be packed into a ALU-case(Raspberry Pi 4 Case) to get a complete NASPi.
(X-C1 V2.0 support auto power on function, X-C1 V1.3 doesn't).
How to Power NASPi: 5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1).
Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
SSD thickness description: NASPi supports SSD with a thickness not exceeding 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thickness..
Button switch operation: Press button 1~2 seconds to reboot, 3 seconds to safe shutdown, 8 seconds to force shutdown (need to install shell script firstly).

Check Stock

Factory Original SONY RMT-TX300P Universal Replacement TV Remote Control Substitute RMF-TX200U RMF-TX300U RMF-TX201U RMF-TX310U RMF-TX220U (Renewed)

...855D XBR-75X855D XBR75X857D XBR-75X857D XBR75X900C XBR-75X900C XBR75X900E XBR-75X900E XBR75X910C XBR-75X910C XBR75X930C XBR-75X930C XBR75X930D XBR-75X930D XBR75X940C XBR-75X940C XBR75X940D XBR-75X940D XBR75X940E XBR-75X940E XBR75X945C XBR-75X945C XBR75Z9D XBR-75Z9D XBR85X850D XBR-85X850D XBR85X855D XBR-85X855D XBR49X835D XBR-49X835D.
XBR43X800D XBR-43X800D XBR43X800E XBR-43X800E XBR43X830C XBR-43X830C XBR48X800C XBR49X700D XBR-49X700D XBR49X705D XBR-49X705D XBR49X707D XBR-49X707D XBR49X750D XBR-49X750D XBR49X800C XBR-49X800C XBR49X800D XBR-49X800D XBR49X800E XBR-49X800E XBR49X830C XBR-49X830C XBR49X835C XBR-49X835C XBR49X835D KDL75W800C KDL-75W800C KDL75W850C KDL-75W850C KDL75W855C KDL-75W855C NP3151W PVGS19P PVGS31P PVGS32P PVGS35P KDL65W858C KDL-65W858C KDL65W859 KDL-65W859 KDL65W859C KDL-65W859C.

Check Stock

Geekworm Raspberry Pi 4 mSATA SSD Adapter X857 V2.0, Raspberry Pi 4 Model B X857 V2.0 mSATA SSD Expansion Board USB3.0 Module for Raspberry Pi 4B UASP Supported ONLY

...s up to 1TB mSATA interface SSD hard disk..
√ How to power RPi 4&X857 V2.0: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port.
√ How to power RPi 4&X857 V2.0& X735: 5Vdc +/-5% , Powered by X735 Type-C or DC5525 Jack Power In port.
Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
√ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..
√ Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, refer to Geekworm WiKi search(Does_the_X825/X855_support_USB_boot).

Check Stock

Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD

√ Supports M.2 NGFF 2280 SSD lengths ONLY.
√ UASP supported only, not support TRIM.
√ How to power RPi 4&X862: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port.
√ How to power RPi 4&X862 V2.0& X735: 5Vdc +/-5% , Powered by X735 Type-C or DC Jack Power In port.
Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
√ Matching metal case for RPi 4&X862 V2.0&X735/X708, refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X862 V2.0..
√ Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, refer to Geekworm WiKi search(Does_the_X825/X855_support_USB_boot).
If the SSD is not recoginzed or other issue, refer to X862 FAQ of WiKi..

Check Stock

Factory Original SONY RMT-TX300P Universal Replacement TV Remote Control Substitute RMF-TX200U RMF-TX300U RMF-TX201U RMF-TX310U RMF-TX220U RMF-TX300B RMF-TX310B RMF-TX200B RMT-TX102U RMT-TX100U

...855D XBR-75X855D XBR75X857D XBR-75X857D XBR75X900C XBR-75X900C XBR75X900E XBR-75X900E XBR75X910C XBR-75X910C XBR75X930C XBR-75X930C XBR75X930D XBR-75X930D XBR75X940C XBR-75X940C XBR75X940D XBR-75X940D XBR75X940E XBR-75X940E XBR75X945C XBR-75X945C XBR75Z9D XBR-75Z9D XBR85X850D XBR-85X850D XBR85X855D XBR-85X855D XBR49X835D XBR-49X835D.
XBR43X800D XBR-43X800D XBR43X800E XBR-43X800E XBR43X830C XBR-43X830C XBR48X800C XBR49X700D XBR-49X700D XBR49X705D XBR-49X705D XBR49X707D XBR-49X707D XBR49X750D XBR-49X750D XBR49X800C XBR-49X800C XBR49X800D XBR-49X800D XBR49X800E XBR-49X800E XBR49X830C XBR-49X830C XBR49X835C XBR-49X835C XBR49X835D KDL75W800C KDL-75W800C KDL75W850C KDL-75W850C KDL75W855C KDL-75W855C NP3151W PVGS19P PVGS31P PVGS32P PVGS35P KDL65W858C KDL-65W858C KDL65W859 KDL-65W859 KDL65W859C KDL-65W859C.

Check Stock

Geekworm X820 V3.0 2.5“ SATA HDD/SSD Storage Expansion Board, USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 B+/3B/ROCK64/Tinker Board&2.5 Inch SATA HDD/SSD

...TA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
User manual, pls refer to Geekworm WiKi search(X820)..
✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices, such as smartphone, tablet... WARNING:Do not power your Raspberry Pi via the Pi's 40-pin header and micro-USB socket at the same time..
✔ X820 can be used as a USB3.0 Mobile Hard Disk when connecting a 2.5 inch SATA interface HDD/SSD do not need extra power and free driver installation. Quick file transfer with high-speed USB 3.0 connectivity from a PC or a Mac..

Check Stock

Geekworm UNO R3 Case | Protective Enclosure ABS Computer Box for Arduino UNO R3/UNO WiFi REV2/UNO REV3- Transparent

This Geekworm design ABS tranparent case is perfect compatible with Arduino UNO R3 development board, UNO WiFi REV2 or UNO REV3. (Arduino UNO Case).
Case Size: 7.5cm x 6cm x 2cm (2.95inch x 2.36inch x 0.78inch).
It is design with two nice "+" holes and 10 "-" holes for cooling system..
It is very easy to install and Mini & attractive body to carry everywhere..
Note: The UNO R3 board is not included in the packing list..
Packing List: 1x UNO R3 ABS Case-Transparent.

Check Stock

Geekworm Raspberry Pi 4 Case, Raspberry Pi 4 Heatsink Aluminum Alloy Passive Cooling Case (P330)

【Passive Cooling Aluminum Alloy Case】Geekworm Raspberry Pi 4 Case - P330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
Cool your Raspberry Pi 4 without fans and noise..
【Add Copper Heatsink for Better Cooling】Equipped with a CPU copper heatsink(to replace the thermal pad) to attach with CPU grease on CPU of Pi4 for better heat dissaption (Not include CPU grease).
【High Quality Aluminum Material】Sturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage..
【Easy Access to Raspberry Pi 4 Ports】Easy installation. Easy access to all Raspberry Pi 4 ports, such as GPIO, Micro HDMI, TF Card, USB-C Power Supply ".
【Packing List】1 x Raspberry Pi 4 Aluminum Alloy Case, 1 x Copper Heatsink, 1 x Screws Pack 【Note】NOT include raspberry pi board.

Check Stock