Categories

Best Generator Spindle

Southwest Wheel R30484X 84 Spindle & 6-5.5\ Bolt Circle Trailer Hub

  • Round R40842X 42 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using 25580 inner and 15123 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 42 Spindle, Spindle width =2" Spindle length=8" Overall length =13" Capacity (pair) 4,000 lbs..
Check Stock

Southwest Wheel R30484X 84 Spindle & 5-5\ Bolt Circle Trailer Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 4-4 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

Coleman Cable 90208802 9ft 12/3 STW Adapter, 9 in, Yellow 5-15P to L5-20R converter

  • PRACTICAL GENERATOR EXTENSION CORD ADAPTER: this generator adapter cord converts a standard 15-amp grounded receptacle to a 20-amp receptacle with a quick twist.
  • RUGGED GENERATOR CORD ADAPTER: the jacket of the generator extension cord adapter protects it from the elements and sun exposure.
  • the molded connectors are made of impact-resistant material, so this generator adapter cord is great for industrial uses.
  • CONTRACTOR GRADE GENERATOR CORD ADAPTER: this generator extension cord adapter is suitable for rugged industrial applications such as operating circular saw, heater and table saw.
  • EASY-TO-USE GENERATOR POWER CORD ADAPTER: simply twist the 15a U-ground plug to lock into the 20a receptacle.
  • the bright yellow jacket of the generator cord adapter increases visibility to minimize tripping incidents.
  • GENERATOR EXTENSION CORD ADAPTER SPECIFICATIONS: 9 in (23 cm) long.
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 5-4.5 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

Superior Steam Shower Generator DeLuxe | Self Draining Steam Shower Kit | 6kW Touch Control in Black | Aromatherapy Steam Head | Programmable temperature & time DeLuxe control for Perfect Steam

  • [ PROVEN RELIABILITY ] Steam Planet’s Superior Steam Generators have been producing high quality Steam Shower kits for over 15 years. The DeLuxe steam shower kit upgraded the user interface, but maintained the same tested steam shower generator. The Superior Steam Generator is ETL certified.
  • [ COMPLETE STEAM SHOWER KIT ] The Superior Steam Generator DeLuxe for showers comes as a complete kit. The steam generator, DeLuxe keypad controller, single aromatherapy steam head in ¾”, temperature probe, and communications are all included. No wasted or unnecessary parts are in the steam shower kit..
  • [ AROMATHERAPY STEAM HEAD ] - Aromatherapy delivery system included with every steam generator. The steam shower generator can warm your essential oils and then infuse them into your steam shower..
  • [ SELF DRAINING ] - To increase the lifetime of your steam generator, the Superior Steam Shower Generator DeLuxe contains an automatic self draining system. The steam generator by automatically draining after each steam shower use flushes the interior of the generator every time..
  • [ SIZING & GENERATOR INFO ] Superior Steam DeLuxe 6kw Generator heats 140-320 nominal cubic feet. To calculate correct cubic feet use to following simple formula: length x height x width ....
Check Stock

ZTTXL Small Inverter Generator Tent Running Cover, Ultra Heavy Duty Tarpaulin Enclosure, for Most 1000~2300 Small Inverter generators, (Small Black)

  • ✔ [Applicable scenarios]: Ensure that you can safely run your generator outdoors regardless of rain, snow, wind or wet weather. Ensure that you can use the generator normally outdoors when there is a power outage due to bad weather, and the power outage Will not affect your life. Let the generator can be used normally outdoors, and will not affect your quality of life due to the noise generated by the generator..
  • ✔ [Unique design]: Patented design, The roof is designed as a sloping roof, which can ensure that the roof can avoid the problem of water accumulation. The surroundings can be sealed and opened to ensure that the sensitive parts of the machine are 100% well protected. The ceiling can be opened in both directions, no need to disassemble, you can refuel, no need to consider the installation direction..
  • ✔ [Super heavy-duty protection]: 100% waterproof tarp, weighing 9 pounds,When the generator is running, it can be used as the running cover of the generator, which can protect the generator to work normally in bad weather outdoors. When the generator is not running, it can be used as the dust cover of the generator without disassembly..
  • ✔[High-strength stainless steel frame]: Each tube has a diameter of 5/8'' (16mm), which is strong and dur....
Check Stock

Generac 0E9371A & Universal Generator Parts Replacement for 070185E AND 070185ES (Filter with Oil)

  • Compatible With Generac 070185B, 070185D, 070185DS, 070185, 70185, 070185BS.
  • Fits Generac 005778-0 (XG4000) Portable Generator, 005798-0 (XG7000E) Portable Generator, 005747-0 (XG8000E) Portable Generator, 0052331 (GH410) Generator, 094441-1 Generator, 0046732 Air-Cooled Automatic Standby Generator, 0042761 GH-220 Generator Engine and More..
Check Stock

Grizzly Industrial G0709-14 x 40 Gunsmithing Gearhead Lathe

  • 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
  • Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
  • Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
  • Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
  • Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".
Check Stock

SOUTHWEST WHEEL 5-Hole, 4.5\ Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) 1\ Spindle

  • Round R30484X 84 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using L68149 inner and L44649 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs..
Check Stock

Rigid Hitch Trailer Hub Kit - for 1-3/8\ Inner / 1-1/16\ Outer Tapered Spindle - 5 Bolt on 4-1/2\ Bolt Circle

  • Round R30484X 84 Spindle & 5-4.5" Bolt Circle Trailer Hub.
  • 5 studs 4.5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock