Categories

Best Glass Block Tile

Fannie May Harry London Gourmet Chocolates S'mores Snack Mix Crunchy Cereal & Fluffy Chocolate-Covered Marshmallows - 18 oz.

  • Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product..
  • Fully cures in temperatures as low as 35 °F..
  • Coverage: 300 - 400 square feet per gallon..
  • Low VOC and easy soap and water cleanup..
  • Excellent enamel holdout, providing a great base for an even topcoat finish..
  • Before painting, review the INSL-X STIX label for proper preparation and application tips..
Check Stock

Microblend Interior Paint and Primer - Blue/Azuresque, Satin Sheen, Quart, Premium Quality, High Hide, Low VOC, Washable, Microblend Cabo Collection

  • Premium-quality, acrylic-urethane primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Use on Drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product.
  • Apply when air and surface temperatures are above 35 °F. Do not apply in direct sunlight or on a hot surface. Avoid rain, moisture or high humidity for the first 24 hours of curing. Not intended for immersion service or continuous water contact.
  • Not for below grade applications. Not recommended for use over polyethylene or polypropylene. Stix must be top coated for exterior use. Not recommended over Kynar (and similar finishes) unless tested and approved by the buyer. Set of 2..
Check Stock

Keadic Glass Tile Cutter Tool Kit, Glass Breaking Pliers, Tile Cutter Hand Tools Set with 6mm Alloy Steel Blades, Spacers, Special Oil Bottles Tape Measure & Cut-resistant Gloves

  • Complete Glass & Tile Cutter Tools Set --- In this easy glide glass & tile cutter hand tools kit, you can get 1 glass tile cutter & 2 pieces 6mm premium alloy steel blades, 1 glass breaking plier & 3 spare spacers, 2 special oil bottles, 1 meassuring tape (1m/3 FT) and 1 pair of cutting-resistant gloves. Everything you need to cut glass, tile, mosaic, mirrors, diamond & minerals are included!.
  • Warm Tips --- The glass tile cutter tools can be used for cutting glass, mirrors, wall tiles, facing tiles, ordinary whole tiles, glazed tiles within 0.47 inches, but not for cutting whole body tiles, vitrified tiles, marble tiles and polished tiles. Please make sure that our cutter is suitable for your own tile type, to avoid affect your use..
  • Premium Glass Breaking Pliers --- Made of high grade steel, more durable and better rust-resistance, can be used to achieve a controlled break in the glass, tiles, resulting in a clean, right-angled cut edge. The extended swivel handle makes it easier for the user to release the force..
  • Steps of Cutting Glass/Tile --- Firstly, mark the cutting position with the meassure tape, then align the top of the glass or tile, use the glass cutter to cut a straight line with even force. Nextly, align the cut section of breaking plier ....
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • Tungsten Carbide Drill Bit For Ceramic Tile Bits For Drill Holes In Clay Plant Pots For Drainage 3/16″ And 1/4″ Ceramic Drill Bits For Tile . Tungsten Carbide Drill Bits have Self Centering Point for Drilling Holes in Ceramic Tile Marble Travertine and Slate..
  • Diamond Drill Bits For Glass 3/16 In 1/4″ In 1/2 Inch Drill Bit For Glass Drill Set. glass Drill Bit For Bottles Half Inch Glass Drill Bit With Guide For Drilling Hole In Glass Bottles And Glass Blocks For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To ....
Check Stock

Tile Cutter Hand Tool Cut Floor Tile Glass Tile Cut Tiles Straight or Quarter Curve Manual Tile Cutter Tool for Cutting Wall Tile Porcelain Tile and Glass Tile Faster and Cleaner than a Wet Tile saw

  • ...le Curve The Tile Cutter Is Great, For Semi Circles Inside Corner Cut Outs Around Outlets Doorways And Toilets You Will Want Kit 1 With Tile Hack Saw Blade For Wall Tile And 4 1/2" Grinder Diamond Tile Blade For Porcelain And Floor Tile, Kit 2 Has Tile Drill Bits For Ceramic And Diamond Drill Bits For Porcelain And Glass To Drill Holes For Grab Bars Shower Doors And Towel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling. Score Tile at Waist Height Not on a Floor. Must Use 2 Hands to Score Hard Tile Never Hold Cutter by The Grips When Scoring as You Canno....
Check Stock

Tile Cutters Tile Tools for Cutting Ceramic Tile Glass Tile Cut Straight Lines and Curved Lines Cleanly No Wet Saw No Mess Cut Faster and Cleaner than a Wet Tile saw Replaceable Blade Cuts 1000 Feet

  • ...rve The Tile Cutter Is Great, For Semi Circles Inside Corner Cut Outs Around Outlets Doorways And Toilets You Will Want Kit 1 With Tile Hack Saw Blade For Wall Tile And 4 1/2" Grinder Diamond Tile Blade For Porcelain And Floor Tile, Kit 2 Has Tile Drill Bits For Ceramic And Diamond Drill Bits For Porcelain And Glass To Drill Holes For Grab Bars Shower Doors And Towel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling. Score Tile at Waist Height Not on a Floor. Must....
Check Stock

Blujellyfish Glass Metal Tile Iridescent White Glass Silver Mirror Stainless Steel Blends Interlocking Strip Wall Tiles TSTNB01 (10 Square Feet)

  • What's in the box: 10 sheets crystal glass metal tiles with cushioning foam around. Very well packed. Safe guarantee. 10 sheets tiles covering 10 sq.feet..
  • Tile colors: This glass tile chips are basicly in white with iridescent colors on surface. It may look cyan, green, pink, yellow in different angles. The steel tile chips are like mirrors..
  • Tile size: The glass metal tile is mounted on 12''x12'' mesh. Thickness 8 mm. Interlocking patterns. It's like mosaic sheets. Very easy for cut and installation..
  • REAL Glass Tile: Blujellyfish provides genuine real glass mosaic tiles. Each sheet is weighted around 3 lbs. The glass metal tile is durable and last forever, not like peel and stick fake tiles..
  • Assured Tile: High grade crystal glass and stainless steel metal materials. No air pollution. Good for health. No worries for pregnant women and children..
Check Stock

Mosaic Tile Cutter Glass Tile Cutter Hand Tool Mosaic Tile Nipper Manual Mirror Cutter Plier for Home DIY Cutting Mosaic Glass Ceramic Mirror

  • ➤【Mosaic Tile Cutter 】The cutting wheel of mosaic tile nipper adopts high hardness tungsten carbide, with the characteristics of rust resistance and wear resistance..
  • ➤【Glass Tile Cutter Hand Tool】The TPR rubber handle allows you to hold and use it effortlessly, very suitable for DIY mosaic glass crafts, used for home improvement, kitchen and bathroom..
  • ➤【Wide Applications】Our tile cutter can cut and break glass or ceramic tiles with a max thickness of 9.5mm (0.37"), used for cutting mosaic, mirror, ceramic, porcelain, glass tile and stained glass quickly..
  • ➤【Easy to Use】1. Use the scoring wheel to draw scratches on glass or tiles. 2. Aligned the scratch with the middle part of glass cutting tool. 3. Break the tile or glass into two pieces..
  • ➤【What You Get】You will get 1pc manual tile cutter and 1 pair of gloves..
Check Stock

DrillGlass 7/16" Diamond Core Drill Bit (3 Pack) for Glass and Tile | Free Beginner's Glass Drilling Guide | 100% Money Back Guartantee

  • 7/16" Diamond Core Bit for Glass and Tile.
  • FREE 4 page drilling instruction guide. FREE 5 page decorating ideas guide.
  • FREE shipping in the US. No risk - 100% money back guarantee.
  • EASY - Use your kitchen scrubbing sponge to hold the glass and cool the bit. We’ll show you how.
  • You’ll make wine bottle lamps, lighted glass block, bird feeders and more.
Check Stock

1 qt XIM Products 11022 White XIM, 400 White Solvent-Based Primer Bonder/Sealer

  • Solvent base White Bonding Primer/Sealer.
  • For Tough-To-Paint surfaces: Glass, Tile, Formica, Metals, Many Plastics, glazed block, Fiberglass.
Check Stock

Glass & Ceramic Tile Nippers - 8 Inch Heavy-Duty Wheeled Glass Tile Nippers Tool With Pro-Grip Handle, Ceramic Tile Cutting Shapping Plier, Tile & Mosaic Nippers

  • High Quality ----- Our Glass Mosaic Cutter is made of 55 steel, and the cutting wheel is made of YG8 cemented carbide material, robust and durable to use.The sharp, carbide wheels measure .875” in diameter and open to accommodate glass tile up to 3/8“ in thickness.
  • Easy To Use And Carry ----- Unique Handle Design is for easy and comfortable to grip while cutting the glass or tile, helping you save much efforts.Reasonable size and delicate appearance, easy to use and carry , so it is a great tool for cutting and shaping with your craft product.
  • Wide Applications ------ Glass Tile Nippers, Use on glass tile: two opposed, carbide scoring wheels easily score and cut glass tile, ideal for trim work on flooring, walls, mosaics and more. Can be perfectly used for cutting glass, tile, ceramic and various other materials.
  • With 2Pcs Replace Blade and 2Pcs Allen Wrench ------ The Glass Mosaic Cutter Nippers come with 2PCS allen wrench and 2Pcs Replace Blade to assist in making uniform cuts when the tile work requires measured consistency. The soft, rubber coated handle grips give you the best control prevent slips while in use wit....
Check Stock

Manual Tile Cutter, 2 in 1 Glass Tile Cutter Hand Tool with Glass Breaking Pliers, Mirror Cutting Kit with 3 Tungsten Steel Blade for Home DIY Cutting Glass, Mirror, Ceramic Tile, Glazed Tiles

  • ★【Multifunction】2-in-1 hand tool put the glass cutter and tile breaking plier together, can cut and break the glass or ceramic tiles with the thickness of 3-15mm/0.12-0.59 inch..
  • ★【Fast Cutting】The blade adopts high hardness tungsten steel alloy, with the characteristics of rust resistance and wears resistance. The non-slip T-shaped handle allows you to hold and rotate effortlessly..
  • ★【Scope of Application】The glass cutter can effectively cut glass, ceramic tiles, mirror and glazed tiles, but not for cutting high-density tiles, such as marble tile, unglazed tile, polished tile, vitrified tile, tempered glass..
  • ★【Operation Method】1. Marking a scratch line on the tile. 2. Aligned the guideline on the tile breaking plier body and the marked scratch line. 3. Rotate the handle until the tile is divided..
  • ★【What You Get】You will get 1pc tile and glass cutter, 3pcs cutting blade, 10pcs feet..
Check Stock

Poster Putty Wht 2oz(2 Pack)

  • 2 Packs - Eack Pack is 2 ounces - Total of 4 ounces.
  • Safe, easy alternative to nails, glues or staples. Removable and reusable.
  • Ideal for temporary hanging and mounting photos, posters, notes, drawings and decorations up to 1 lb..
  • Adheres to most clean, dry porous and non-porous surfaces like: wood, tile, linoleum, cinder block, brick, metal, plastic, porcelain, mirrors or glass.
  • Not recommended for use on flocked or loose wallpaper and on peeling or fresh paint.
Check Stock