Categories

Best Glass Drill Bit

K Kwokker 15Pcs Masonry Drill Bit Set 5/8\ to 1/8\

  • ...illing much more easier, less effort and work with a minimum of pressure. Like a hot knife thru butter! WATER IS THE KEY TO GETTING DRILL BITS TO LAST. PLEASE COOLING WITH WATER AND CONTROL THE SPEED WHEN DRILLING..
  • ☺[Widely Used Range, a Good Beginning is Half Done, Carbide Drill Bits Perfect For] masonry, title, glass, wood, plastic, ceramic, terracotta, brick, stucco, brick, cinder block, steel, laminate flooring, garden pot, marble, pickguard, mirrors, windows, etc. PLEASE NOTE THAT FOR DIFFERENT SIZES, IT IS RECOMMENDED TO USE DIFFERENT DRILLING SPEEDS TO PREVENT DRILL BIT DAMAGE CAUSED BY WRONG DRILLING SPEEDS..
  • ☺[1 x K Kwokker Ceramic Drill Bit Replaces Two Drill Bits (1 x Glass & Tile Drill bit + 1 x Masonry drill bit), Higher Efficiency] Custom triangle spear tip solves drill bit wander and slipping. U-shaped groove drill body, the drill body is central ground and anti-rust treatment, so that the drainage is smoother..
  • ☺[15 Years of Industry Experience, Professional Grade Ceramic Drill Bit Used in] General drill, electric drill, hand drill and bench drill, the drill bit can be installed and used. Impact drill is not recommended. High speed spiral can be effective in the removal of debris and it can improve your work efficiency. Here are t....
Check Stock

COMOWARE Masonry Drill Bit Set 10 pcs, Concrete Drill Bit for Ceramic Tile, Glass, Cinderblock, Hard Plastic, Cement, Cr45 Material

  • What you receive: you will get 12 pieces glass concrete drill bit set, with the size of approx. 6 mm, fitting your daily needs.
  • It can be installed in the general electric hand drill, bench drill.
  • The machine drill clamp range is 10 mm and above.
  • Reliable to use: the masonry drill bits are made of quality alloy, sturdy and reliable, anti-rust and wear-resistance.
  • With a reinforced head and nice hardness prevent bit cracking, it can provide a longer life.
  • Easy to use: designed with 1/4 inches hex shank, the carbide tip drill bit can be applied to all power tools more easily and securely, which will drill faster and smoother, saving your time and efforts.
  • Wide applications: the drill bit set can be applied to drilling glass, tile, ceramics, wood, marble, concrete, etc..
  • You should note that you have to remember to add water or coolant when drilling continuously.
  • Fine function: this glass and tile drill bit has a small incision and fine drill edge, the hole is smooth and complete, without leaving burrs, which will give you wonderful experience.
Check Stock

Gunpla 10Pcs Multi-Material Drill Bits Set, Cemented Carbide Masonry Drill Bits for Glass, Plastic, Tile, Concrete, Brick, Wall, Wood and Brick Wall 6mm

  • 【ALLOY STEEL MATERIAL】: Gunpla drill bits set forged from premium ALLOY STEEL quality, glass drill bits provide smooth, accurate drilling in ceramic tile, marble, mirrors, glass, aluminum, concrete and wood. The durable drill bit must be kept well lubricated for the best possible results. This is most commonly done by running water over the drilling surface.
  • 【DIMENSION】: Designed with a 6mm Spear-pointed Tip, the multi material drill bits have a 1/4 inches design that reduces breakout. Length: 70mm, Shank: approx. 3/16 inches. Our spear head drill bits are heavy duty, meant to serve for a very long time..
  • 【APPLICATION】: Ideal for drilling ceramic tiles, glass, marble, and mirrors. When drilling hard materials, please use water for lubrication, good cooling can extend the service life of the drill bit. The glass drill bits are typically used with electric drills to create holes in all these cited material.
  • 【TUNGSTEN CARBIDE TIP】: The ceramic drill bit feature a Tungsten carbide tip for extended bit efficiency and life. During the process of drilling, the coating rubs away the glass, creating a perfect hole in the material being drilled.
  • 【WHAT YOU GET】: The package includes 10pcs 6mm glass and tile drill bits and a plastic storage box, ....
Check Stock

6PCS Ceramic Tile Drill Bits, Mgtgbao Masonry Drill Bits Set for Glass, Brick, Tile, Concrete, Plastic and Wood Tungsten Carbide Tip for Wall Mirror and Ceramic Tile with Size (6mm-12mm).

  • _6 pieces fine grade high durable drill bits in 4 different sizes: that is 2 x 6 mm(1/4"), 1 x 8 mm(5/16"), 1 x 10 mm(3/8"), 1 x 12 mm(1/2") fit your different needs.
  • _ High Quality Multi-purpose Drill Bit Set: Tungsten Carbide Tipped for prolonged life and heavy-duty use.
  • _Special Design: U type slot design with fast drilling dust remove, 3-flats shank allows drill bit to be held tightly and stably in power drill..
  • _Cut Perfect Circles Holes: Suitable for glass, ceramic tile, wood, ceramic, stone, concrete, brick, etc. When drilling hard material (glass, porcelain floor tile, marble or granite), please use water for lubrication.
  • _ One drill bit replaces two drill bits (1x glass & tile drill bit + 1x Mansonry drill bit). Ideal for drilling fastner holes in bathroom tiles, or wall mirrors. Once it drills through the tile or mirror this drill bit will cope easily with any masonry behind it.
Check Stock

12 Pcs Diamond Drill Bits for Ceramic, Diamond Hole Saw Drill Bit Set Kit, Premium Glass Drill Bit for Bottles, Pots, Marble, Granite Stone, Tile Cutting 0.16 Inch - 1.18 Inch（4 mm - 30 mm）YLYL

  • 12 PCS DIAMOND HOLE SAW DRILL BIT SET INCLUDES: 0.16“/4mm(2pcs), 0.23“/6mm, 0.31“/8mm, 0.39“/10mm, 0.47”/12mm, 0.55“/14mm, 0.62”/16mm, 0.7“/18mm, 0.78”/20mm, 0.86”/22mm, 1.18“/30mm. The different sizes glass cutting drill bit to meet you various demands!.
  • SUPER MATERIAL: Glass drill bit for bottles are made of industrial grade carbon steel, sharp, fine workmanship and super wear-resistant, extended service life. Glass cutting drill bit are high quality and good performance that excellent for making clean and accurate hole..
  • WIDE USAGE: Diamond hole saw drill bit set kit removes a complete circle from glass, marble, tiles, granite, ceramic or other. Perfect for drilling glass, porcelain tile, granite, bottles, wood, blocks jars, ceramic marble and and other hard surfaces etc..
  • DIAMOND DRILL BITS FOR CERAMIC TIP: When you using the diamond hole saw, please use iubrication (water), iubrication will extend drill bits life..
  • SATISFACTION GUARANTEED: Our team is committed to providing every customer with good products and satisfactory service. If there are any probl....
Check Stock

Diamonds (Marble Vinyl)

  • 【Glass Drill Bit】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. Fine workmanship and super wear-resistant, sharp.
  • 【High Quality Drill】Each hole is treated with smooth and accurate surface treatment,and the top oh the hole is thickened to achieve excellent cutting strength.
  • 【Tile Hole Saw 15 Sizes】 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm，to meet various demands.
  • 【Wide Usage】Used on Drill Glass,Wood,Tile Bottles,Blocks Jars, Ceramic,Slate Mable, Granite Light Stone, and other hard surfaces.
  • 【Attention】Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life..
Check Stock

wesleydrill Masonry Drill Bit Set 5 pcs 1/4"-1/2" Concrete Drill Bit Set Fit for Home DIY Building and Engineering Suitable for Electric Drill or Professional Drill

  • ...nry Drill Bit 5/16"(8mm), 1xMasonry Drill Bit 3/8"(10mm), 1xMasonry Drill Bit 1/2"(12mm), all in storage case..
  • [Fitment]: Carbide drill bits ideal for drilling faster holes in bathroom tiles, or wall mirrors, can easily drill holes on tile, concrete, brick, glass, ceramic, wood, and reduces breakout, please cooling with water and control the speed when drilling.Suitable for Home DIY, and Building/Engineering Use.Suitable for electric drill or professional drill..
  • [Material]: Concrete drill bit set industrial strength carbide drill bit tip, excellent abrasion resistance, make the drilling much more easier..
  • [Advantage]: Masonry drill bit set have 4 differenct concrete drill bit sizes that will help in drilling by starting with the smallest bit and continuing to the size needed..
  • [Easy To Drill, Fast And Clean]: Tungsten drill bits strong tungsten carbide drill bit tip and longer service life of masonry drill bit, the double U-type groove slot design brings fast drilling dust remove, and 3-flats shank allows drill bit easy plug and to be held tightly..
Check Stock

15 Pcs Diamond Drill Bits for Ceramic, Diamond Hole Saw Drill Bit Set Kit, Premium Glass Drill Bit for Bottles,Pots, Marble, Granite Stone, Tile Cutting 0.23 Inch - 2 Inch（6mm - 50mm）YLYL

  • 【15 Sizes】Diamond drill bits for ceramic, 6mm/0.23“，8mm/0.31“，10mm/0.39“，12mm/0.47”，14mm/0.55“，16mm/0.62”，18mm/0.7“，20mm/0.78” , 22mm/0.86”，25mm/0.98”， 26mm/1.02“，28mm/1.1“， 30mm/1.18“, 40mm/1.57in, 50mm/2“. Glass cutting drill bit to meet various demands!.
  • 【Wide Usage】Diamond hole saw drill bit set kit removes a complete circle from glass, marble, tiles,granite, ceramic or other., Perfect for drilling glass, porcelain tile, granite, bottles, Wood, Blocks Jars, ceramic marble and and other hard surfaces etc..
  • 【Super Material】Glass drill bit for bottles, are made of industrial grade carbon steel, sharp, fine workmanship and super wear-resistant, Extended service life. Glass cutting drill bit are high quality and good performance that excellent for making clean and accurate hole..
  • 【Tip】Diamond drill bits for ceramic, When you using the diamond hole saw, please use lubrication (water), lubrication will extend drill bits life..
  • SATISFACTION GUARANTEE: Our team is committed to providing every customer with good products a....
Check Stock

Masonry Drill Bit Set & Cement Drill Bit, Professional Drill Bit Set (10PCS) for Glass/Brick/Plastic/Cement/Wood/Tile/Etc, Industrial Strength Carbide Drill Bit Tip, 1/8\-1/2\ by TITGGI

  • TITGGI Masonry drill bit set, industrial strength carbide drill bit tip, excellent abrasion resistance, make the drilling much more easier. this cement drill bits can easily penetrate various material (glass, ceramic, cement, wood, brick, travertine, hard plastic, etc.).
  • This masonry bit is suitable for most general drill, electric drill, hand drill and bench drill, the double U-type groove slot design brings fast drilling dust remove, and 3-flats shank allows drill bit easy plug and to be held tightly, strong tungsten carbide drill bit tip and longer service life of TITGGI masonry drill bit..
  • Package includes 10 Pcs drill bit set: 1/8.
Check Stock

3/4 Inch Diamond Drill Bit Ceramic Pot Porcelain Tile Glass Bottle Granite Hole Saw 0.75 inches by Drilax

  • DRILL HOLES in glass bottles, porcelain ceramic tiles, plant pots, fish tanks, granite, marble with diamond coated drill bit hole saw..
  • GREAT for making wine bottles with light strings. Can also drill through glass blocks. You can drill through bath tub tile, and put on a handle bars. Aquarium drill bit for overflow installation..
  • WORKS with STANDARD electric, cordless or upright drill presses. Shank size is 3/8 inch..
  • EASY TO USE Diamond Drill Bits. Start at an angle, go vertical, do not apply too much pressure. Keep the tool wet for cooling..
  • DIAMOND TIPPED DRILL BIT for drain holes, bottles, quartz, shower, faucet, kitchen and bathroom upgrades..
Check Stock

Mgtgbao 6MM Masonry Drill Bits, 10PC 1/4” Concrete Drill Bit Set for Tile,Brick, Plastic and Wood,Tungsten Carbide Tip Best for Wall Mirror and Ceramic Tile. …

  • ➊Exquisite Craftsmanship: The surface of the drill bit is treated by fine polishing, and the new electroplating process can prevent the drill bit from rusting and prolong the life of the drill bit..
  • ❷ Special Design: U type slot design with fast drilling dust remove, 3-flats shank allows drill bit to be held tightly and stably in power drill..
  • ❸High Quality Multi-purpose Drill Bit Set: Tungsten Carbide Tipped for prolonged life and heavy-duty use..
  • ❹Cut Perfect Circles Holes: Suitable for glass, ceramic tile, wood, ceramic, stone, concrete, brick, etc. When drilling hard material (glass, porcelain floor tile, marble or granite), please use water for lubrication.
  • ➎10 Pcs pack of 6mm (1/4” )drill bits. Set comes with durable plastic case for safe keeping..
Check Stock

AuSL 10PCS Masonry Drill Bits Set, Professional Drill Bits Set Concrete for Tile, Brick, Cement, Concrete, Glass, Plastic, Cinder block, Wood Chrome Plated With Industrial Strength Carbide Tips

  • ...s triangle grooves spear tip and solves drill bit wander and slipping. U groove drill bit design, surface rust treatment, drilling and chip removal more smoothly. It can improve your work efficiency..
  • [Multipurpose]: Masonry drill bits set is widely used, it can easily penetrate various material, like ceramic tile, glass, hard plastic, cement concrete, mirror travertine, brick wall, wood, and can reduce breakout.Multi-Material Drill Bits – Easily Drills through Ceramic Tile, Glass, Cinderblock, Hard Plastic, Cement, Concrete, Mirrors, Windows, Travertine, Brick, Wood, and So Much More!.
  • [Drill Bit Set]: 1/8″ (3 inch length – 2 included), 1/4″ (4″ length – 2 included), 1/4″ (6″ length – 2 included), 5/16 (6″ length), 3/8″ (6″ length – 2 included), and 1/2″ (6″ length)..
  • [Convenient Storage Case]: Keeps Your Masonry Drill Bits Safe & Organized in a Rust-Free Hard Plastic Container..
Check Stock

Rannb 10pcs Masonry Drill Bit Set 1/8\ Drilling Dia Carbide Drill Bit for Glass, Tile and Ceramic

  • 【Solid Tip】Excellent tungsten carbide drill bit tip make drilling much more easier, which save effort and work with a minimum of pressure..
  • 【Package Content】10pcs x Glass Drill Bit.
  • 【Improve Your Work Efficiency】General drill, electric drill, hand drill and bench drill, the drill bit can be installed and used. Impact drill is not recommended. High speed spiral can be effective in the removal of debris and it can improve your work efficiency..
  • 【Suitable for Multiple Materials】Good for drilling fastner holes in bathroom tiles, or wall mirrors, It can easily drill holes on cement, concrete, tile, glass, ceramic, and stable drilling, no boundary damage, please cooling with water and control the speed when drilling..
Check Stock