Categories

Best Glass Print Bed Option

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

FlashForge Creator 3 Pro Independent Dual Extruder 3D Printer

  • 【Independent Dual Extruder Design】The TL-D3 Pro dual-extruder 3D printer has independent dual-nozzle function, which can not only perform....
  • 【Upgrade borosilicate glass bed】：TENLOG's upgraded borosilicate glass bed allows the printed product to adhere better without warping. Even the....
  • 【Print recovery】：The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print....
  • 【High-quality accessories】：Multi-language interface (7 languages) color touch screen, built-in self-developed mute motherboard tmc2209 driver,....
  • 【Metal scraper】 when using dual-material mode, the metal scraper is afraid that it will wipe the remaining filament on the nozzle, so there is no....
Check Stock

HICTOP CR-10 Glass Bed Double Sided Upgraded Tempered Glass Bed 310x310mm for CR-10 CR-10S CR-10S pro V2 3D Printer

  • HICTOP CR-10s pro glass bed is coated on both sides and both sides can be used. Buying one plate gets you two usable sides, doubling your value.
  • Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or....
  • It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if....
  • The size of HICTOP glass bed is 310*310mm（12.2*12.2 inch）, it can work with Creality 3D printers such as the CR-10, CR-10S, CR-10S pro, CR-10 V2,....
  • The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a....
Check Stock

HICTOP Ender 3 pro Upgrades Glass Bed Double Sided Upgraded Tempered Glass Bed 235x235 for Ender 3 Ender 3 Pro Ender 5 CR-20 Pro 3D Printer (235 * 235)

  • HICTOP Ender 3 pro glass bed is coated on both sides and both sides can be used. Buying one plate gets you two usable sides, doubling your value.
  • Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or other tools to help the model to stick on to the bed. You do not need to worry about the prints curling if the temperature of the hot bed is no less than 50℃.
  • It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if you are printing big model on our HICTOP glass bed. Please do not try to remove the model before the plate cools to room temperature.
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it can work with Creality 3D printers such as the Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and other similarly sized printers.
  • The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a superplate surface.
Check Stock

U-Shaped Cedar Raised Bed 6'x6'

  • Large Efficient U-Shaped Planting Area.U-shaped design offers more growing space and requires less lumber, for a more efficient and cost-effective raised bed..
  • Two Different Configurations with the Same Product. The product comes with enough lumbers and hardware to choose between the option that better fits your needs. Option 1 has a longer middle aisle for better access and offers 28 sq ft of planting area and Option 2 has a shorter middle aisle for a larger planting area and offers 35 sq ft of planting area..
  • Strong, Quality Build: 1″ thick premium quality deck boards combined with strong joint design will not bow under the weight of wet soil and will last for years. Proudly Made in the USA, 5 Year Warranty. Assembles in minutes and can be easily disassembled as needed..
  • 100% Natural: 1” Thick Rot Resistant Cedar Deck Board Construction (no composites!). Environmentally Friendly Design: No harmful chemicals or residues to worry about!.
  • Soil Capacity: 26 cu. ft. for Option 1 and 29 cu. ft. for Option 2. Product Overall Foot Print is: 74”x74”11" deep and opened bottom to accommodate large, deep-rooted plants.
Check Stock

HICTOP Upgraded New Version Ender 3 pro Glass Bed One Side Tempered Glass Bed 235x235 for Ender 3 Ender 3 Pro Ender 5 CR-20 Pro 3D Printer (235 * 235)

  • HICTOP Ender 3 pro glass bed is coated on one side and the coat material is better than the both sides one, it is much more stable and not easy to remove. We can send you new one for free if it peels off in 3 monthes.
  • Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or other tools to help the model to stick on to the bed. You do not need to worry about the prints curling if the temperature of the hot bed is no less than 50℃.
  • It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if you are printing big model on our HICTOP glass bed. Please do not try to remove the model before the plate cools to room temperature..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it can work with Creality 3D printers such as the Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and other similarly sized printers..
  • The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a super plate surface..
Check Stock

XYZPrinting Super Wireless 3D Printer Fully Open Source 3D Printers Large Printing Size 11.8“ x 11.8” x 11.8“ upgradable to Print Metallic/Carbon PLA

  • Bigger is Better - With a print bed of 11.81" x 11.81" x 11.81"(300 x 300 x 300 mm) the da Vinci Super offers a large platform with even larger....
  • Wide Material Selection - With an extruder nozzle that can print up to 260℃ (500°F), and a heated print bed that can reach 100℃ (212°F), print....
  • Upgraded Hardware - With automatic platform calibration, heat-resistant glass printing platform, intelligent quick-release nozzle and intuitive....
  • Open Filament System - The da Vinci Supers open filament system allows users to print with 3rd party materials. You can also choose from....
  • NFC Chip for Optimized Material Profiles - Our 2nd generation chip that’s attached to the filament spool ring, which transfers data regarding the....
Check Stock

Creality 3D Open Source CR-10 3D Printer All Metal Frame 12x12x15.5 Inch Build Volume and Heated Bed Includes Glass Bed (Blue and Orange Decorative Strips are Given Randomly)

  • HIGH QUALITY: This all aluminum frame provides a sturdy base meant to last for years. The POM engineering thermo-plastic "Triangle-Slot" wheels provide excellent dimensional stability even during extended use. Elimination of metal-on-metal steel rods cuts noise down dramatically..
  • GLASS BED: This printer comes stock with a reliable and flat glass bed. Forget about other printers with uneven printing surfaces and warped beds. This glass bed ensures a 100% usable and flat surface for any print from the smallest test file to the largest model. An absolute necessity when dealing with such a large build space, print from corner to corner and get perfect layer lines every time..
  • WARRANTY: Our experienced 3D printing engineers are available 24/7 to offer you lifetime technical support as well as our 1-Year limited manufacturers replacement part. If you are not satisfied with the results of your prints, contact us and we will work with you to provide assistance until you are printing like a pro!.
  • MORE CHOICE: Supports multiple 3D printing filaments: ABS / PLA / TPU and so on.
  • EASY TO ASSEMBLE: Further simplified structure means fast assembly and easy adjustment, which saves you both time and energy and simple and suitable for ....
Check Stock

Inland Glass PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Transparent Glass Filaments, Yellow Glass

  • GLASS PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • GLASS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 190°C - 210°C (374°F - 410°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND GLASS PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Glass PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland Glass PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY GLASS PLA: Glass PLA filament is non-toxic, the mater....
Check Stock

HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D Printers

  • The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied..
  • The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed..
  • Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
  • Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines..
Check Stock

LulzBot Mini 2 Desktop 3D Printer

  • Maximum print size: 160 mm x 160 mm x 180 mm (6. 3 inches x 6. 3 inches x 7. 08 inches).
  • Tool Head: E3D Titan Aero with . 50mm Nozzle – Compatible with Flexible and Rigid Materials - Maximum Temperature: 290°C (554°F).
  • Heated print bed: borosilicate glass/pei - maximum temperature: 120°c (248°f).
  • Includes 1-year limited with 7-days/week phone and email technical support.
  • Certifications: UL, CSA, ETL, FCC, CE, WEEE, FSF-RYF, OSHWA. Print Volume: 281. 4 inches.
Check Stock

TENLOG TL-D3 Pro Independent Dual extruder 3D Printer BMG extruder 280 Degree high Temperature Nozzle Silent Motherboard TMC2209 Driver 600W Power Supply Print Size 310x310x350mm.

  • 【Independent Dual Extruder Design】The TL-D3 Pro dual-extruder 3D printer has independent dual-nozzle function, which can not only perform....
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the....
  • 【High-quality accessories】：Multi-language interface (7 languages) color touch screen, built-in self-developed mute motherboard tmc2209 driver,....
  • 【Easy to Assemble】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes..
  • 【Print recovery】：The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print....
Check Stock

TL TENLOG TL-D3 Pro 3D Printer Independent Dual Extruder 3D Printer Silent Mainboard tmc2209 Driver 4.3 inch Multi Language Color Touch Screen,Professional 3D Printer,300x300x350mm

  • 【Independent Dual Extruder Design】The TL-D3 Pro dual-extruder 3D printer has independent dual-nozzle function, which can not only perform....
  • 【Upgrade borosilicate glass bed】：TENLOG's upgraded borosilicate glass bed allows the printed product to adhere better without warping. Even the....
  • 【Print recovery】：The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print....
  • 【High-quality accessories】：Multi-language interface (7 languages) color touch screen, built-in self-developed mute motherboard tmc2209 driver,....
  • 【Metal scraper】 when using dual-material mode, the metal scraper is afraid that it will wipe the remaining filament on the nozzle, so there is no....
Check Stock