Categories

Best Glass To Fiberglass

Hyperlite Automatic Wakesurfer 5ft Black/Red

  • Layered Glass - Our Fiberglass Is Available In 3 Weights Depending On The Board. Over Time, Traditional Woven Glass Fibers Will Separate. With Layered Glass Every Hyperlite Deck Will Have The Same Pop Off The Double Up Year After Year..
  • Single Concave Base - Channels Water Down The Center Of The Board For A Solid And Controlled Feel..
  • Bamboo Pop Top - This Additional Birch Laminate Sits Between The Rider And The First Layer Of Fiberglass, Delivering The Feel & Ollie Power Of Natural Wood Core Boards..
  • Quad Fin - Delivers More Control And Speed Directing Water To The End Of The Board And Out The Tail For Better Acceleration..
  • Machined Eva Traction - Diamond - Ultra Grade Eva Foam Machined Into Diamond Shapes With A Rough Finish Increases Grip And Hold..
Check Stock

AOAtoee 12-Pack Replacment Wicks for Tiki Torches - Outdoor Fiberglass Tiki Torch Wick - DIY Wine Bottle Oil Lamp Wicks for Patio Lighting Garden Lights

  • Material: High-quality glassfiber wicks, superior to cotton wicks, long lasting burning, so you don’t have to change these wicks frequently..
  • Easy to Operate: Our fiberglass wick is tightly woven, so you can cut it to any length you want according to your needs..
  • Good Choice for Outdoor Lighting: Fiberglass wicks provide lighting for your outdoor party and add atmosphere to bring convenience to your life..
  • Widely Application: These replacement wicks are compatible with most standard glass bottles, like whiskey bottles, glass bottles, wine bottles and also suitable for lanterns and oil lamps..
  • Package: Comes with 12-Pack replacement fiberglass wicks, 0.5 by 9.85 Inch..
Check Stock

West System 655-8 G/flex Epoxy Adhesive, two 4.5 fl oz.

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

ODL Sunburst Style Design - Front Door Glass Replacement - Entry Door Insert Kit with Clear Tempered Glass - 5 Light External Grille - 23.8\ x 11.8\ White Frame

  • ✔️DECORATIVE GLASS DOOR REPLACEMENT FOR A 23.8" X 11.8" FRAME - This door glass kit will replace an existing door glass panel with outer frame dimensions of 23.8” x 11.8” (+/- 0.25”), and a door thickness of 1-3/4”. This kit contains 1 insulated glass panel, 1 door glass frame set, 1 pack of specially designed screws, and 1 pack of screw covers..
  • ✔️COMPATIBLE WITH STEEL OR FIBERGLASS DOORS - Door glass kits are suitable for particular steel and fiberglass doors, depending on the panel configuration, and they must be 1-3/4" thick. Make a beautiful home improvement at a fraction of the cost of a new door. This is a great way to extend your door's lifetime value..
  • ✔️EASY TO INSTALL - Replacement of the same size existing door inserts typically take under an hour. You only need standard tools like safety glasses, drill with a Phillips head bit, and a putty knife. Two people are recommended to tackle this project..
  • ✔️TRADITIONAL STYLE FOR YOUR HOME'S ENTRANCE- Perfect for side entry or front exterior door. Thermally sealed, air and water tight..
  • ✔️TEMPERED SAFETY GLASS - Produced with a heat-treating process, this glass is stronger than annealed glass (typical window glass)..
Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/Flex Epoxy Adhesive, Two 1 qt & Dynatron 3 Pack Spreaders, 358

  • Product 1: EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • Product 1: IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • Product 1: OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • Product 1: BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes an....
Check Stock

Western Reflections Laurel Traditional Style - Front Door Glass Replacement - Entry Door Insert Kit with Triple Pane Tempered Glass - 24\ x 38\ Tan Frame - Nickel Caming

  • ...8” (+/- 0.25”), and a door thickness of 1-3/4”. Perfect replacement for the following existing door glass panels: a) Half Light on a 6’8” door. This kit contains 1 insulated glass panel, 1 door glass frame set, 1 pack of specially designed screws, and 1 pack of screw covers..
  • ✔️COMPATIBLE WITH STEEL OR FIBERGLASS DOORS - Door glass kits are suitable for particular steel and fiberglass doors, depending on the panel configuration, and they must be 1-3/4" thick. Make a beautiful home improvement at a fraction of the cost of a new door. This is a great way to extend your door's lifetime value..
  • ✔️EASY TO INSTALL - Replacement of the same size existing door inserts typically take under an hour. You only need standard tools like safety glasses, drill with a Phillips head bit, and a putty knife. Two people are recommended to tackle this project..
  • ✔️CLASSIC LOOK FOR YOUR HOME'S ENTRANCE- Raise the bar on your home's curb appeal with a Laurel doorglass. A mix of glass textures with a focal bevel cluster creates a sophisticated look, offering a medium-high level of privacy..
  • ✔️TEMPERED SAFETY GLASS - Produced with a heat-treating process, this glass is stronger than annealed glass (typical window glass)..
Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/flex Epoxy Adhesive, two 1 qt

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

ODL Exterior Door Glass Replacement - Entry Door 24' x 38' Insert Glass Kit with Energy Efficient Low-E Double Pane Tempered Clear Glass - Home Improvement - White Frame

  • GLASS DOOR REPLACEMENT FOR A 24" X 38" FRAME: This door glass kit will replace an existing door glass panel with outer frame dimensions of 24” x 38” (+/- 0.25”), and a door thickness of 1-3/4”. Perfect replacement for the following existing door glass panels: a) Half Light on a 6’8” door..
  • COMPATIBLE WITH STEEL OR FIBERGLASS DOORS: All our door glass kits are suitable for particular steel and fiberglass doors, depending on the panel configuration, and they must be 1-3/4" thick. Make a beautiful home improvement at a fraction of the cost of a new door. This is a great way to extend your door's lifetime value..
  • EASY TO INSTALL: Replacement of the same size existing door inserts typically take under an hour. You only need standard tools like safety glasses, drill with a Phillips head bit, and a putty knife. Two people are recommended to tackle this project..
  • GLASS IS SLIGHTLY TINTED WITH A LOW-E COATING: This thin metallic coating helps reduce heat loss and glass condensation in winter and avoids air conditioning overuse in summer..
  • TEMPERED SAFETY GLASS: Produced with a heat-treating process, this glass is up to four times as impact resistant as annealed glass. When broken, it shatters into many small fragments, preventing major injuries..
Check Stock

BOSCH T130RF1 1-Piece 3-1/4 In 30 Grit Carbide Special for Ceramics T-Shank Jig Saw Blades

  • Cuts ceramics, fiberglass and glass 3/64 In. to 5/8 In. thick.
  • 30 grit carbide matrix bonded to blade edge for fine, straight or curved cuts.
  • 3-1/4 In. overall length, 2-5/16 In. working length.
  • Designed for ceramics, fiberglass and glass.
Check Stock

Hyperlite State Jr. Kids Wakeboard 125 W/Remix Bindings Black/Blue (4-8)

  • Abrupt continuous rocker - This rocker line adds a little more kick to the speed that so many riders look for. The Abrupt Continuous rocker line transitions to a slightly exaggerated tip and tail rocker, creating added pop without sacrificing speed into the wake..
  • Monocoque construction - Integrating the top and bottom fiberglass layers into one. Generating a more durable board on side impacts to prevent delamination..
  • Layered glass - Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every hyperlite deck will have the same pop off the double up year after year..
  • Molded in fins - Non detachable fins designed into the board's shape for added stability and solid edge hold..
  • M6 inserts - Delivers a more secure fit of the bolts to the inserts, improving bolt retention keeping binding hardware locked down..
Check Stock

Rejuvenate Scrub Free Soap Scum Remover Shower Glass Door Cleaner Works on Ceramic Tile, Chrome, Plastic and More 24oz + 128oz

  • Rejuvenate Scrub Free Soap Scum Remover Non-toxic Non-abrasive Cleaning Formula - Spray and Rinse for Streak Free Finish on Glass, Ceramic Tile, Chrome, Plastic and More.
  • Safe to use on glass, ceramic tile, fiberglass, natural stone, plastic, chrome and porcelain.
  • Easy to use, just spray and rinse, for a streak finish.
  • The no scrub soap scum remover is the winner of multiple cleaning product awards.
Check Stock

Hyperlite Broadcast Wakesurfer Sz 5ft 4in

  • MONOCOQUE CONSTRUCTION Integrating the top and bottom fiberglass layers into one. Generating a more durable board on side impacts to prevent....
  • LAYERED GLASS Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered....
  • BIOLITE 3 CORE The secret recipe we have been perfecting since day one. This core material is the gold standard in the industry and used throughout....
  • TAIL SHAPE - SQUASH A squarer back with rounded corners delivering a snappy feel with increased hold in the wave..
  • BUTCH CUSTOMS Scott Bouchard has been shaping wakeboards for close to twenty years, working with the biggest legends in the sport. Based in Satellite....
Check Stock

Hyperlite State Jr. Kids Wakeboard 125 W/Remix Bindings Black/Blue (12K-2)

  • Abrupt continuous rocker - This rocker line adds a little more kick to the speed that so many riders look for. The Abrupt Continuous rocker line transitions to a slightly exaggerated tip and tail rocker, creating added pop without sacrificing speed into the wake..
  • Monocoque construction - Integrating the top and bottom fiberglass layers into one. Generating a more durable board on side impacts to prevent delamination..
  • Layered glass - Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every hyperlite deck will have the same pop off the double up year after year..
  • Molded in fins - Non detachable fins designed into the board's shape for added stability and solid edge hold..
  • M6 inserts - Delivers a more secure fit of the bolts to the inserts, improving bolt retention keeping binding hardware locked down..
Check Stock