Categories

Best Glue For Edge Joints

Testor Corp 3527C Non-Toxic Cement w/Applicator 1oz

  • Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure....
  • Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and....
  • Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
  • Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
  • INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry....
Check Stock

Satellite city CRK-H-SS super solvent 2oz debonder for CA GLUE

  • Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure TM) and 2 ounce bottle of Accelerator (Insta-Set TM)..
  • Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds..
  • Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
  • Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
  • INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry scent and activates CA without any degrading of the CAs strength. UN-CURE (TM) debonder will soften cured CA to clean up squeeze out, spills or for disassembly..
Check Stock

AUXTUR Silicone Caulking Tool, 3 in 1 Caulking Finishing Tool Kit(Stainless Steelhead), Scraper Tool, Grout Removal Tool, Caulk Remover for Bathroom, Kitchen, Floor, Window, Sink Joint, Frames Seal

  • ... 【Multiple Usage Scenarios】AUXTUR Silicone Caulking Tool works with most types of sealants, silicones, resins, grouts and more. Ideal for showers, windows, siding, sinks and tubs with latex, silicone or acrylic caulk. The caulking tool can be used in homes, kitchens, bathrooms, tanks, windows, sink joints and more..
Check Stock

Ryobi 6-Amp Biscuit Joiner Kit - JM82GK

  • This Plate Joiner Makes Quick And Easy Biscuit Cuts For Super-strong Miter Joints.
  • Butt Joints And Edge-to-edge Cuts. Features Include An Adjustable Fence.
  • With Dust Bag For Easy Cleanup And Preset Depth Stops For Biscuit Sizes 0.
  • Powerful 4” Plate Joiner Is Essential For Any Woodworker. Powerful 6 Amp.
  • Fence Adjusts To A Maximum Depth of 1-1/8 Fence Tilt Adjusts Up To 45 Degrees Dust Port W".
Check Stock

Milescraft 53460003 5346 Dowel Pin Bucket-375 Wooden Dowels-1/4in 200 pcs -5/16in 100pcs -3/8in Dia 75pcs Made of Hardwood-Ideal for Woodworking Projects Original Version

  • Hardwood dowel pins with chamfered ends for a strong, secure joint between two boards.
  • Reusable bucket includes and stores 375 dowel pins.
  • Please review specifications to ensure this product will meet your project’s dimensional requirements (Imperial or Metric Units).
Check Stock

Titebond 1415 III Ultimate Wood Glue, 32-Ounce Bottle, 2 Pack

  • 【Wide application】Suitable for bonding Wood, Oak, Board, Table, Chair, Furniture, Wooden Product, Wooden Crafts, Wooden Furniture, Wood edge, etc. Can be used for bonding between wood and wood, wood and other materials, such as wood and metal, wood and rubber, wood and plastic. The wood glue is transparent and colorless, very durable. It is very suitable for making bonding crafts, diy, daily object repairing, etc. Glue is suitable for all kinds of uneven, rough and vertical surfaces..
  • 【Super viscosity】Glue for Furniture - Unique instant bonding performance, which can bond any wood such as oak, wooden product, wooden crafts, wooden furniture, wood edge within a few seconds. This is the most effective and economical adhesive. Other glues are only short-lived or even non-sticky, but our metal glue can always remain viscous to make your furniture, models, crafts stable and beautiful..
  • 【Super viscosity】Glue for Furniture - Unique instant bonding performance, which can bond any wood such as oak, wooden product, wooden crafts, wooden furniture, wood edge within a few seconds. This is the most effective and economical adhesive. Other glues are only short-lived or even non-sticky, but our metal glue can always remain viscous to make your furniture, ....
Check Stock

High Pressure Glue Injector

  • Each package contains three glue injectors with caps..
  • Accordion style plastic body collapses with thumb pressure so glue placement is controlled.
  • Stainless steel needle tip for pinpoint accuracy will not bend or close up under pressure..
  • For detail work, forcing glue into furniture joints & cracks or making repairs.
  • Each injector has a capacity of 1 ounce. Comes with storage cap..
Check Stock

17yd Aluminum Foil Tape High Temperature 3.15 Mil Foil Professional Adhesive Aluminum Foil Tape for Dryer Vent, Ductwork, AC Unit, Furnace, Water Heater, 2 inchx17 yd

  • 【Aluminum Foil Tape - Widely Application】Aluminum Foil tape keep widely applicability, generally used for sealing hot and cold air ducts (quality HVAC tape), insulating aluminum duct pipes, aluminum alloy seals, stainless steel and plastic joints/joints, temporary repair of metal surfaces, copper pipe fixing, etc..
  • 【High Temperature Resistant Tape】Used for both indoor and outdoor use. Withstands extreme temperature from -20°C to 180°C. Resists flame, thermally conductive, moisture, weather, some chemicals and smoke transmission, corrosion and rusty resistant..
  • 【Strong Adhesion】Foil tape is made of aluminum foil and high quality acrylic glue, more sticky and stable under low and high temperature condition, that equips with flexible and suitable thickness of aluminum foil and industrial grade adhesive liner. Super sticky makes your use more convenient ideal for vents and ducting..
  • 【Easier Peel Off 】Due to Thicker foil, the backing paper is easier to be peeled off from edge. It will not be crinkled and curled on itself, easier working and save your time!.
  • 【Product After-sales 】Pls order our product by your confidence, any problem with our aluminum foil pls contact us by your order, we promise that your problem could be effective solved....
Check Stock

39yd Aluminum Foil Tape High Temperature 3.15 Mil Foil Professional Adhesive Aluminum Foil Tape for Dryer Vent, Ductwork, AC Unit, Furnace, Water Heater, 2 inchx39 yd

  • 【Aluminum Foil Tape - Widely Application】Aluminum Foil tape keep widely applicability, generally used for sealing hot and cold air ducts (quality HVAC tape), insulating aluminum duct pipes, aluminum alloy seals, stainless steel and plastic joints/joints, temporary repair of metal surfaces, copper pipe fixing, etc..
  • 【High Temperature Resistant Tape】Used for both indoor and outdoor use. Withstands extreme temperature from -20°C to 180°C. Resists flame, thermally conductive, moisture, weather, some chemicals and smoke transmission, corrosion and rusty resistant..
  • 【Strong Adhesion】Foil tape is made of aluminum foil and high quality acrylic glue, more sticky and stable under low and high temperature condition, that equips with flexible and suitable thickness of aluminum foil and industrial grade adhesive liner. Super sticky makes your use more convenient ideal for vents and ducting..
  • 【Easier Peel Off 】Due to Thicker foil, the backing paper is easier to be peeled off from edge. It will not be crinkled and curled on itself, easier working and save your time!.
  • 【Product After-sales 】Pls order our product by your confidence, any problem with our aluminum foil pls contact us by your order, we promise that your problem could be effective solved....
Check Stock

Taytools 500020 5 Piece 15cc Glue Syringe Injector Replaceable Tips

  • The glue syringes are perfect for applying glue to awkward and hard to reach areas..
  • They can also be used to force glue into cracks and joints..
  • Tips can be trimmed to increase flow. Come with replaceable caps..
  • Can be washed with warm water, and will last indefinitely..
Check Stock

HITOMEN Adjustable Doweling Jig Kit with 5 Dowel Drilling Sleeves 6/8/10mm for Woodworking

  • 【PRECISION】Self-centering drill guide and adjustable right angle tool allow for precise doweling and maximum joint strength. When drilling, steel bushings ensure precise alignment for perfectly positioned dowels..
  • 【HIGH-QUALITY】Made of high quality aluminium alloy, wear-resistant, long-lasting use..
  • 【FUNCTION】3 in 1 5 holes dowel and cam lock drlling jig system set. Designed for drilling 6mm, 8mm, 10mm dowel holes and 15mm cam holes. Suitable for making edge-to-edge, edge-to-surface and edge-to-corner joints..
  • 【APPLICATION】Can be used for edge, surface, T-shaped, and L-shaped joints. Ideal for home repair or DIY, handyman, wood working fanciers..
  • 【SERVICE】If you have any questions, please contact with us, we will try our best to solve the problem..
Check Stock

BSI / Taytools Bob Smith Industries 5 Piece Set Cyanoacrylate CA Super Glue Including Thick, Medium and Thin Viscosities Accelerator and Debonder Fine Tip Applicators 1-2 Ounce Bottles

  • Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure TM) and 2 ounce bottle of Accelerator (Insta-Set TM)..
  • Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds..
  • Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
  • Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
  • INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry scent and activates CA without any degrading of the CAs strength. UN-CURE (TM) debonder will soften cured CA to clean up squeeze out, spills or for disassembly..
Check Stock

VonHaus 246-Piece Drill and Drive Bit Set with Titanium Coated HSS Bits and Storage Case for Drilling Metal Masonry Wood and Plastics

  • ACCURATE CUTS: Make quick, accurate biscuit cuts for super-strong miter joints, T-joints, butt joints and edge-to-edge/corner joints with the 8.5 Amp....
  • PRE-SET DEPTH: Pre-set depth stops for biscuit sizes 0, 10 and 20 guarantees accuracy without measuring.
  • ADJUSTABLE FENCE: Adjustable fence allows the tool to be set on an angle for easily joining mitered pieces.
  • DUST COLLECTION: Includes a dust port with dust bag for easy clean-up and an unobstructed view when in use.
  • ERGONOMIC DESIGN: Large, ergonomically designed top grip handle for enhanced comfort. The VonHaus biscuit joiner comes with 1 x 4” blade, the....
Check Stock