Categories

Best Gm Tester

A & E HAND TOOLS - Diesel Set Heavy Duty Global Tester W/Adapters TU15-70

  • Contains a diesel compression tester and 9 diesel compression adapters.
  • Compression tester has a 16 1/2" wire reinforced hydraulic hose with a swivel-end quick coupler, allowing for easy connection to all Lang brand....
  • The 2-1/4" gauge has a dual scale dial with ranges from 0-1000 PSI and 0-70 bar with an easy to read red and black face.
  • Includes adapters for GM, Isuzu, Lincoln Mark VII Continental and Ford/Navistar, Audi, Mercedes, Peugeot, Toyota, VW, Toyota..
Check Stock

LNG-TU-15-38 Diesel Compression Test Adapt Adapter

  • 【Perfect Fit】 Diesel Compression Test Adapt Adapter uses with STAR Diesel Compression Tester TU-15. Compatible with GM: Duramax 6.6L Turbo Diesel....
  • 【Perfect Design】 M10-1.25 thread adapter with quick disconnect screws into the head of the engine in the glow plug hole. Manufactured to specific....
  • 【Superior Material】 Diesel Compression Tester Adapter is made of high quality steel and copper. Features high strength, anti-corrosion,....
  • 【Easy to Use】 Simply plug right into the back of the gauge. Thread the adapter into the glow plug hole and then it’s like a quick release that....
  • 【100% Satisfaction Guarantee】 Your satisfaction is our priority. We strive to give our customers excellent service. All Sixcow products support....
Check Stock

ABN Deluxe Antifreeze and Coolant Tester Hydrometer Tester – Automotive Antifreeze Tester for Ethylene Glycol Coolant

  • ...reezing up in cold climates and to prevent your engine from overheating which can cause mechanical breakdowns and engine failure.
  • Avoid these issues by testing your coolant mixture with the ABN Deluxe Car Antifreeze Coolant Test Kit.
  • BUILT TO LAST: Constructed of premium plastic and rubber materials, this antifreeze tester is designed to easily test freezing and boiling temperatures of your coolant to water solutions.
  • The large rubber bulb and 5.5-inch (14 cm) rubber tube makes it easy to suck liquid into the small plastic reservoir.
  • Easy to read stickers allow you to test the solution and provides instructions.
  • Flush out with water after each use for accurate readings.
  • CLEAR TESTER FOR VISUAL INSPECTION: As a bonus, the clear reservoir allows you to inspect the condition of the antifreeze in your vehicle.
  • Easily inspect color and for any rust, sludge, or other sediments.
  • EASY TO READ HYDROMETER SCALE: The clear capsule contains sensitive pointers that measure the freezing and boiling points of the liquid in both Celsius and Fahrenheit.
  • These pointers are easier to read than standard coolant test strips because you do not need to focus on the color or PH balance to understand the freeze and boiling points of your solution.
Check Stock

Stant 12032 Threaded Radiator Cooling System Tester Adapter

  • Adapter is required to test many 1999 and newer GM cooling systems with a threaded filler neck.
  • Works With 12270 Stant Cooling System Tester.
Check Stock

DKwoeshg Cooling System Pressure Tester Kit - Coolant System Leak Check Tool Set, Radiator Tester and Pressure Gauge to Diagnose Radiator, Heater Core and Head Gasket Problems for Most Vehicles

  • Comprehensive testing: Our coolant pressure tester kit includes various adapters that enable you to test several types of radiators and cooling systems, you will receive 1 pressure test pump with pressure gauge 1 thermometer 4 chrome plated steel cap adapters 8 anodized aluminum cap adapters 1 carrying case..
  • Superior Quality: Made from high-quality aluminum, this coolant pressure tester kit is built for durability and long-lasting performance..
  • Accurate Readings: The kit allows accurate pressure readings of up to 35 PSI, enabling you to diagnose any coolant system leaks or issues with ease..
  • Wide Compatibility: With multiple adapters and connection options, compatible with Audi, Alfa, BMW, Benz, Chrysler, Citroen, Ford, Honda, Mazda, Mercedes, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Suzuki, Toyota, Volvo, VW, Jeep, Lexus, GM, Subaru, including cars, trucks, and SUVs..
  • Leak detection made easy: This radiator pressure tester helps to quickly identify coolant leaks in your vehicle, saving you time and money on expensive repairs..
Check Stock

Lichamp Fuel Pressure Gauge, Fuel Pump Pressure Test Kit with Hose Adapter, Compatible with Honda, Ford CFI EFI, GM MPI and Chrysler MPFI

  • FUEL PRESSURE TESTER - Automotive fuel injector tester kit tests fuel supply & injection system problems, help to judge if there are broken internal components or faulty oil lines..
  • PARTIAL COMPATIBILITY - Suitable for limited gasoline engines with 1/4", 3/8" and 5/16" fuel line connector, compatible with Honda, Ford CFI EFI, GM MPI and Chrysler MPFI..
  • UP TO 100PSI / 7BAR - Provide with dual scale accurate readings 0-100psi (0-7 bar), easy to read and provide you more precise and accurate readings..
  • FOUR IN ONE SET - Equipped with accurate gauge and three hair pin T-adapter which sized 6.30mm(SAE 1/4)7.89mm(SAE 5/16)9.49mm(SAE 3/8)..
  • LONG LASTING MATERIALS - Designed for repeated use with high quality materials (Brass, Steel, Rubber, Plastic), rugged and long-lasting. Excellent air-tightness and avoid any leaking..
Check Stock

JoyFans Coolant Pressure Tester Kit, Cooling System Coolant Vacuum Refill Kit Automotive Tools Works on Radiator Leak Test & Coolant Fill Purge Service for Cars Trucks Airlift

  • Radiator pressure tester kit performs one-stop cooling system service from leak detection to coolant filling. Professional tools and adapters are complete and suitable for most domestic and foreign vehicle models. Saves you from worries. Simple to use. Use the radiator pressure pump to pressurize the system, locate & troubleshoot leaks. Use the coolant refill tool (work with vacuum pump) to change coolant in vacuum..
  • Coolant pressure tester kit fits GM, BMW, VW, GMC, Porsche, Chevy, Dodge, JEEP, Chrysler and many other domestic and foreign cars, trucks, airlifts, etc., while working with 20PCS dedicated adapters for one-person operating. Fits most models while working with the cone universal adapter, but 2 people are required to operate (one person holds the cone head and the other one pumps up). Manual tester pump with gauge calibrated from 0-35psi /0-2.5bar..
  • Pneumatic vacuum coolant purge refill tool gives efficient flush while feeding the system with fresh coolant under vacuum. Quick and clean technique allows no trapped air to remain. Features quick coupling design. Working range: -60~-50 cmHg (-23~-20inHg). Operate with specific adapters and universal adapter, this cooling system refill tool can fit almost all types of vehicle models, one person ....
Check Stock

YSTOOL Radiator Pressure Tester Pneumatic Vacuum Type Purge Refill Kit Universal Automotive Cooling System Water Tank Leak Test and Coolant Fill Tool 28PCS Set with Adapters Gauge Black Case

  • Radiator pressure tester & coolant vacuum refill kit mainly includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1PC universal cone rubber adapter, fit nearly any type of radiator openings on vehicles at home and abroad, helping detect and determine whether the water tank is leaking and fill the coolant under vacuum. There are also 3PCS radiator cap adapters and 2PCS connectors checking the radiator caps for leaks..
  • Radiator pressure tester is composed of 3" pressure gauge(0-35 psi.
  • 0-2.5 bar), aluminum cylinder pump and 21" long rubber hose. Manual radiator leak tester features fast pressure relief function and quick disconnect for convenience. Use the hand gauge tester pump tool to pressurize the radiator / cap and observe whether the pointer drops over time to confirm a system leak..
  • Vacuum coolant filler uses shop air to draw a vacuum, by using the connected coolant filling hose to extract new coolant and transfer it into the cooling system with no air pockets produced. Adding coolant in vacuum condition will not appear large cavitation, avoid engine warping and other damage. Coolant vacuum refill tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass....
Check Stock

Actron CP7818 Fuel Pressure Tester Kit,Black

  • Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
  • Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
  • Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
  • Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.
Check Stock

JoyFans Fuel Pressure Test Kit, TU-114 Fuel Injector Pump Pressure Tester Automotive Tool with Gauge Adapter for Schrader Test Port Fuel Injection System on Car Motorcycle Blue Case

  • Quick Inspection of Fuel System: Fuel pump pressure tester kit is used to make comprehensive fuel system check and fault diagnosis on fuel supply and fuel injection pump pressure. Quick installation and easy access to pressure readings. Automotive fuel injector tester has a 1/4" SAE female brass fitting at end of the hose, can be inserted directly into the fuel pump's standard Schrader or fuel pressure test port, or installed a tee fitting on to help splice an in-line connection..
  • Safe Fuel Recovery: Fuel pressure gauge features shock-resistant rubber housing and dual color scale dial, ranging from 0-10 bar (0-140 psi) for easy and accurate work on both American and metric systems. High precision 3-1/2" gauge easily holds pressure values and has convenient pressure reset button with 16" drain hose for safe fuel recovery. 15" built-in flexible hose adapter has 300 psi W.P, can be connected to fittings for fuel pressure test..
  • Scope of Application: JoyFans fuel injection pressure tester kit covers a variety of gasoline engine cars, motorcycles, trucks, SUVs, ATVs, RVs with modern Schrader test port fuel injection systems but Bosch, CIS Jetronic, Throttle Body System on GM vehicles. Custom-made toolbox bases on the shapes and sizes of all tools to keep th....
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • TEST INJECTOR SYSTEM FUEL PUMPS: The new and improved ABN Comprehensive Universal Fuel Pressure Tester Master Fuel Pressure Gauge Kit is a complete fuel test gauge package that quickly tests the fuel pump pressure on injector systems.
  • NEW & IMPROVED: High-quality fuel pressure gauge hose replacements have been improved with implanted fiber.
  • Fitted with quick coupling system and pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
Check Stock

15PCS No Spill Coolant Tester Filling Funnel Flush Kit for Radiator Flush for Engine Flush for Coolant Pressure Tester Kit

  • Fits For an engine flush For coolant pressure tester kit For radiator flush.
  • Characteristic： Two threaded cap adapters with gaskets specifically for GM for Ford vehicles.
  • Applicability： The straight extension and elbows allow for multiple configurations designed to accommodate most vehicles on the market.
  • Performance: Trapped air pockets usually cause erratic cooling system and heater performance，spill-free funnel Will help you improve this problem.
  • Tips： If you have any other questions, please consult us and we are happy to answer it for you.
Check Stock