Go Kart Clutch 3/4" Bore 12T with #35 Chain Centrifugal Clutch and Chain for Go Kart Minibike Honda Kart Engines

  • 【Specifications】: 3/4" Bore 12 Tooth Centrifugal Clutch with 4 Feet #35 Chain for 2-7 HP Engines, Engagement Speed 2300±300 RPM.
  • 【Fitment】: This go kart clutch and chain also fit for Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4” shaft.
  • 【Fitment】: For Honda GX160, GX200, GX 140, GX120, GC160, GC190, and for Harbor Freight Greyhound 196cc and Harbor Freight Predator 212cc.
  • 【Widely Compatibility】: This 3/4 clutch 35 chain Perfect for Go Kart, Minibike and Fun Kart.
  • 【Before Purchasing】: Please check carefully up and below information about our go cart clutch 3/4 shaft fitment before your purchasing, all item included show on the first photo, any question, please contact us first, thank you!.
Check Stock

VASHLY Go Kart Clutch 3/4" Bore 10T with #40 41 420 Chain for Go Kart Minibike and Fun Kart Engine

  • 【10 Tooth Centrifugal Clutch with #40 41 420 Chain】This go kart clutch 3/4" Bore 10T with #40/41/420 Chain, Designed for Single Wheel Drive Karts with Tires no larger than 15" Tall, fit for Go Kart Minibike Yerf-Dog karts with Tecumseh.
  • 【Compatible】The centrifugal clutch 3/4" bore 10 tooth fit for Tecumseh Engines 2 - 6.5 HP 2300 RPM, Fit for 2- 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200. And for Briggs Stratton and 2-6.5 HP with 3/4" Shaft..
  • 【Product Material】 The Go kart ​clutch is made of quality iron material, which is lightweight, portable, sturdy, and durable, has maximum torque, is wear-resisting, and has fast heat dissipation..
  • 【Easy to Install】 Easy to install, Metric Property Bolt and Washer Kit are Included. Mounts Onto Crankshaft Using Bolt and Washer on the End of the Crankshaft. Bi-directional Operation, Clutch Can be Mount Inward or Outward on Crankshaft..
  • 【Before Purchasing】Package Includes 1 x 3/4 10 Teeth Clutch, 1 x #40/41/420 Chain, 2 x Clutch Bolts 、2 x Washer Kits, and 2 x Screw wrenches, Plea....
Check Stock

munirater Rear Live Axle Kit Brake Assembly Replacement for Drift Trike Go Kart

  • Rear live axle kit replacement for Go Kart.
  • replacement for many 50cc 70cc 90cc atv quads.
  • replacement for Atomik, Motowork, DHZ, LEI..
  • This rear axle kit for trike is made of quality materials, very sturdy and practical, high performance and long service life..
  • This is premium and durable live axle kit for rebuild Go Kart Quad or Trikes..
  • This is a complete rear axle kit and brake kit assembly for go kart, which is perfect for DIY go kart projects or rebuilds..
  • Package includes: rear axle kit, brake assembly, pair of pillow blocks, T8F chain..
Check Stock

Aosom Kids Pedal Powered Ride-On Go Kart Racer with Hand Brake and Non-Slip Wheels - Orange

  • AS FAST AS YOU CAN: Combining entertainment with exercise, this go-kart for kids 5-12 years old is pedal powered and requires no batteries or electricity to operate..
  • GEARED, JUST LIKE THE REAL THING: Our kids go kart can move in both forward or reverse directions and features a safety handbrake that securely controls the cart the for a safe, controlled stop..
  • WHEELS TO TAKE YOU ANYWHERe: Anti-slip wheels allow this kart to operate smoothly on virtually any type of surface from grass to gravel..
  • SAFETY AND EASE A CHIEF CONCERN: The chain of our pedal go kart is fully enclosed with a chain guard to ensure that it is safely concealed and out of the way..
  • ADJUSTABLE SEAT: The adjustable bucket seat with high back on this pedal toy provides great support and can fit better your kids'body for comfortable driving. Note: Need to remove screws and reinstall.
Check Stock

FDJ 3/4 Centrifugal Clutch 12 Tooth with 35 Chain Go Kart Clutch 3/4 Bore and Chain Kit for Mini Bike Fun Kart Fits 2-7 HP Honda Engines

  • ✔【GENERAL FITMENT】3/4" Go Kart Clutch 12T with 5 Feet 35 Chain Set Fits for 2- 6.5HP Small Engines Honda GC160, GC190, GX120, GX140, GX160,....
  • ✔【ALSO COMPATIABLE】3/4 Centrifugal Go Kart Clutch is Perfect for Go Kart Baja Mini Bike MB165 and MB200, including Baja Heat, Mini Baja and the....
  • ✔【STRONG AND DURABLE】Made of High Quality Chrome Plating Iron Material, Which is Lightweight, Sturdy, Durable, Wear-resisting, Fast Heat....
  • ✔【COMPLETE SET】Package Includes 1 x 3/4 12 Teeth Clutch, 1 x 5 feet #35 Chain, 2 x Chain Connecting Links, 1 x Clutch Bolt and Washer Kit, 1 x....
  • ✔【EASY INSTALLATION & SATISFIED GUARANTEE 】Simply Mounts the Clutch onto Crankshaft Using Bolt and washer on the End of the Crankshaft, Easy to....
Check Stock

212CC Torque Converter 6.5 HP 3/4 Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set - 30 Series

  • ...lacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
  • 【TAV2 30 Series Go Kart Clutch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
  • 【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".(1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
  • 【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
  • 【For your convenience this kit comes with】1 x 3/4" Driver Pulley.
  • 1 x 10 Tooth Sprocket for #40/41/420 Chain.
  • 1 x 12 Tooth Sprocket for #35 Chain(Chain not included).
  • 1 x Full Mounting Hardware. Note This is not made by Comet.
Check Stock

Carkio Go Kart Clutch 3/4 Bore 13 Tooth Inner Hole 20mm Compatible with Mini-Bike #428 Chain 6.5 HP 210CC 215CC

  • Go Kart Minibike Belt Direct Drive Fun Kart Centrifugal Clutch 3/4" Bore 13 Tooth #428 Chain.
  • Fitment: Go-karts and Mini-bikes, clutch can mount inward or outward on crankshaft..
  • Package Included: 1 x Go Kart Clutch 3/4" Bore 13 Tooth (Inner Hole 20mm).
  • Carkio focuses on providing high-quality products and first-class services at reasonable prices. If you are not satisfied with our products, you can....
Check Stock

Caltric compatible with Primary Clutch Sliding Fixed Sheave Kit Yamaha Rhino 700 YXR700F 2008-2013

  • Centrifugal Clutch 3/4” Bore 12 Tooth for 35 Chain, Common clutch for 2-6.5 HP engines 2300 RPM. The 12T clutch has a broached 3/16" keyway with two set screw holes located 90 degrees apart.
  • Our go-kart clutch is made of high-grade steel, heavy-duty and long lasting. It can withstand the strain and heat caused by friction, once the clutch engages.
  • Perfect for Go Kart, Minibike and Fun Kart. Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4” shaft.
  • Also fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • Go cart clutch kit includes two set screws, but chain is not included. The two set screw holes are tapped 1/4"-28.
Check Stock

WOOSTAR 428 Chain Master Link Pack of 10 Replacement for 110cc 125cc 150cc 200cc 250cc Chinese ATV 4 Wheeler Quad Pocket Bike Buggy

  • 428 Chain Connecting Joint Master Link For Go kart ATV Pit Dirt Bike Quad.
  • Up for sale is a Pack of 2 of 428 Master Links, or also called master links, for your size 428 motorcycle, atv or go kart chain.
  • Pitch on this chain is: 1/2 inch.003cbr003e Roller diameter is: 0.335 inch.003cbr003e Inside Measurement: 5/16 inch.003cbr003e Pin Diameter is : 0.177 inch.003cbr003e Tensile Strength: 4300 lbs..
  • This chain is suitable for 428 Chain Motorcycle. Use to Replace Broken Links.
Check Stock

Motovecor Centrifugal Clutch Go Kart Clutch Predator Engine Clutch Baja Mini Bike 3/4 Inch Bore 12 Tooth 12T for #35 Chain 6.5HP - Upgrade

  • Centrifugal Clutch 3/4” Bore 12 Tooth for 35 Chain, Common clutch for 2-6.5 HP engines 2300 PRM.
  • Fits for Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh....
  • Also fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-6.5HP motors in all brands.
  • Perfect for Go Kart, Minibike and Fun Kart.
  • Go Kart Clutch kit includes two set screws, but chain is not included.
Check Stock

LAFORMO Centrifugal Go Kart Clutch 1 14T 14 Tooth Heavy Duty For 40,41,420 Chain up to10HP,1600 Series Racing Clutch Go Kart Cart Mini Bike

  • 1600 Series" Racing Clutch (14T) - #41/40 Chain, 1" Bore (In or Outboard) Perfect for Go Kart Mini Bike. (Chain Size: #40/41/420).
  • Perfect for Go Kart Mini Bike. (Chain Size: #40/41/420).
  • Specifications: 1" Shaft Bore, 14 Tooth, 1 3/10" Drum Thickness..
  • Satisfaction Guaranteed , 100% Brand New!!.
  • Two Set Screws are included in the bag, please open the bag with caution, it may drop out.
Check Stock

Mophorn Go Kart Forward Reverse Gear Box 10T #40/41 12T #35 Go Karts Accessories TAV2 30 40 41 For 2HP-7HP Engine Transmission Local Honor 3 Shift Modes ONLY Works with 30 Series Torque Converter

  • Structural Parameters: Gearbox Shaft Size: 5/8".
  • Quality Metal: This go-kart gearbox is made of high-quality metal, wear-resistant and lightweight. It provides precise torque and a long lifetime..
  • Three Shift Modes: Our go-kart gearbox kit has three shift modes: forward, reverse, and neutral. It allows for convenient and easy operation..
  • Complete Accessories: This go-kart transmission kit includes 1 x forward / reverse gearbox with 3/16" keyway, 1 x gear lever assembly, 1 x gearshift....
  • High Adaptability: This 30 Series forward reverse gearbox is suitable for # 35 chain 12T and #40/41/420 chain 10T go-karts, dune buggies, UTV, and....
Check Stock

LotFancy Go Kart Clutch 3/4 Bore 10T with #40 41 420 Chain, Centrifugal Clutch Fit for Go Kart Minibike MB165 & MB200, Up to 6.5HP, 1pc Connecting Link Included

  • LotFancy Go Kart Clutch 3/4 Bore 10T with #40 41 420 Chain, Centrifugal Clutch Fit for Go Kart Minibike MB165 & MB200, Up to 6.5HP, 1pc Connecting Link Included.
  • Perfect for Go Kart Minibike Baja Mini Bike MB165 and MB200, including Baja Heat, Mini Baja and the Baja Warrior.
  • Works with 2 – 6.5hp Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200. Briggs Stratton and 2-6.5 HP with 3/4″ Shaft. Tecumseh Engines 2-6.5 HP with 3/4″ Shaft.
  • Mounts onto crankshaft using bolt and washer on the end of the crankshaft.
  • Package included: 1 x Centrifugal Clutch, 1 x #40/41/420 Chain, 1 x Clutch Bolt, 1 x Washer Kit, 1 x wrench and 1 x Connecting Link.
Check Stock