Best Good Mechanical Properties

INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max

  • 【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
  • 【Professional Use】Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
  • 【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • 【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • 【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
Check Stock

GOONSDS Bakelite Board 2PCS Laminate Raw Materials for Laboratory and Silicone Rubber Mold,10x100x150mm

  • ...rption, non-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

SainSmart ePA12-CF Carbon Fiber Nylon Filament 1.75mm, 0.5kg (1.1lbs), Dimensional Accuracy +/- 0.05 mm, Black

  • [Lowest Moisture Absorption]: An upgraded formulation of 85% PA12 + 15% Carbon Fiber, this brand new SainSmart Carbon Fiber Nylon Filament absorbs much less moisture than its predecessor. The mechanical properties and dimensional stability of which are less susceptible to the temperature and humidity of the ambient environment, providing a tough and no warp material..
  • [Excellent Mechanical Properties]: This upgraded carbon fiber nylon filament has superb strength, rigidity, outstanding resistance to impact, wear, chemical and temperature and also low surface resistivity, these properties combined making this PA12+CF Filament an ideal choice for high performance applications..
  • [Improved Printability and Finish]: Adding 15% carbon fiber, this carefully formulated blend ensures ease of printability, smooth surface finish and good layer adhesion with no warping and less shrinkage..
  • [Wide Industrial Applications]: The carbon fiber reinforced material enables weight reduction and durability, suitable for functional prototypes, tools, fixtures, end-use parts, pump impellers, mechanical gears, precision and engineering components, widely used in robots, drones, and automotive and aviation industry..
  • [Tips for Printing]: As an abrasive material, the ePA12+CF Fila....
Check Stock

GOONSDS Insulation Electrical Board Bakelite Phenolic Board Sheet Laminate Raw Materials for Laboratory and DIY,300x300x5mm

  • ...rption, non-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

GOONSDS Bakelite Phenolic Board Sheet 2PCS Laminate Raw Materials for Laboratory and Electrical Machinery Parts,150x200x5mm

  • ...rption, non-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

GOONSDS 6 PCS Bakelite Board Laminate Raw Materials for Silicone Rubber Mold and Electrical Machinery Parts,100x150x3mm

  • ...rption, non-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

GOONSDS Bakelite Phenolic Board Sheet 10 Pieces Laminate Raw Materials for Silicone Rubber Mold, Length 100mm, Width 100mm,Thickness 4mm

  • ...rption, non-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

Micarta Linen LE Phenolic Sheets .250inch (1/4inch) Thick x 12inch x 36inch,Natural(KS-2356-21-10)

  • ✤ Insulating rod has the characteristics of insulation and no static electricity, making it a mold for insulating switches, variable resistors, and machinery for electronic products..
  • ✤ Good physical properties: The insulating rod has a certain degree of temperature resistance and is used for tooling molds. Instantaneous temperature resistance of 140°C, long-term temperature resistance of 90°C, and can be used in a variety of high-temperature environments..
  • ✤ Product application: It is suitable for electrical machinery, electrical equipment and insulating structural parts with high mechanical performance requirements, and is used in electronic workshops, chemical machinery, aviation industry, petrochemical and other fields..
  • ✤ Excellent insulation: high mechanical strength, toughness and wear resistance, dimensional stability, corrosion resistance. Excellent performance, good electrical performance at room temperature, and good mechanical processing performance..
  • ✤ Material: Phenolic resin. The insulating rod corrosion resistance, precision machining processes.Anti-insulation,high hardness,easy processing,non-absorbent, non-conductive.widely used in electrical products..
Check Stock

4 Pcs Brass Sheet, Size 4\ x 4\

  • Material :56 Brass , Nature , Double-sided film brass plates.
  • Size: 4"×4" , thickness: 18 Gauge (1mm ).
  • The brass plates has good mechanical properties, good plasticity in the hot state and good plasticity in the cold state. It has good machinability. It is easy brazing and welding, and resistance to corrosion..
  • Applications: DIY projects, hobbies, crafts, building decoration, industrial, conduction heat, and so on.
Check Stock

AIMIMI Bakelite Rod Brown Insulating Sticks Phenolic Resin Electrostatic Prevention Suitable for Structural Parts Length 500mm,Diameter,35mm

  • ✤ Insulating rod has the characteristics of insulation and no static electricity, making it a mold for insulating switches, variable resistors, and machinery for electronic products..
  • ✤ Good physical properties: The insulating rod has a certain degree of temperature resistance and is used for tooling molds. Instantaneous temperature resistance of 140°C, long-term temperature resistance of 90°C, and can be used in a variety of high-temperature environments..
  • ✤ Product application: It is suitable for electrical machinery, electrical equipment and insulating structural parts with high mechanical performance requirements, and is used in electronic workshops, chemical machinery, aviation industry, petrochemical and other fields..
  • ✤ Excellent insulation: high mechanical strength, toughness and wear resistance, dimensional stability, corrosion resistance. Excellent performance, good electrical performance at room temperature, and good mechanical processing performance..
  • ✤ Material: Phenolic resin. The insulating rod corrosion resistance, precision machining processes.Anti-insulation,high hardness,easy processing,non-absorbent, non-conductive.widely used in electrical products..
Check Stock

2 Pieces TC4 Titanium Rods Metal Titanium Rods,Diameter:6mm Length:500mm,Suitable for Automobile, Shipbuilding Industry Machinery, Etc.

  • ✅ TA2 Titanium Looks Like Steel With A Silver-gray Luster. It Is A Transition Metal..
  • ✅ TA2 Titanium Has High Strength, Low Density, High Hardness, High Melting Point And Strong Corrosion Resistance.
  • ✅ It Has Good Toughness And Weldability, And Good Low-temperature Properties. Titanium Can Still Maintain Its Mechanical Properties And Thermal Conductivity At Low And Extremely Low Temperatures..
  • ✅ Used For: Aerospace, Automobile, Agriculture, Shipbuilding Industry Machinery, Etc..
Check Stock

OD 3 mm Carbon Fiber Rod for RC Airplane Matte Pole, Length 15.7 inch, 5pcs

  • Performance: Carbon fiber rod has super mechanical properties , good heat and corrosion resistance.
  • Characteristics: Lighter than aluminum, but stronger than steel.
  • Application: Widely used in stunt kites, mechanical equipment, robotics, as well as R/C cars and helicopters.
Check Stock

OD 2.5 mm Carbon Fiber Rod for RC Airplane Matte Pole, Length 15.7 inch, 5pcs

  • Performance: Carbon fiber rod has super mechanical properties , good heat resistance, corrosion.
  • Characteristics: Lighter than aluminum, but stronger than steel.
  • Application: Widely used in stunt kites, mechanical equipment, robotics, as well as R/C cars and helicopters.
Check Stock