Categories

Best Gpio Support

GeeekPi Raspberry Pi GPIO Extension Board, Raspberry Pi 4 Expansion Board GPIO 1 to 4 for Raspberry Pi 4B / 3B+ / 3B with Screws

  • GPIO Expansion Board for Raspberry Pi----The board is suitable for Raspberry Pi 4B/3B+/3B/3A+/2B+/2B/B.
  • GPIO 1 to 4: One row GPIO port could change to be four rows GPIO ports, will makes your experiment easier and more convenient.
  • This is an upgraded version of the Raspberry Pi GPIO expansion board, which can connect more devices to the same GPIO pin..
  • Package ncludes:1 x Easy Multiplexing Board,4 x Copper stick,4 x Screws,4 x Nuts.
Check Stock

Geniatech XPI-3128 Single Board Computer,Embedded Computer Module,Development Board ,Rockchip RK3128 Quad Core Cortex-A7 8GB WiFi ,Card-Sized High Performance Board

  • 85mm*56mm, Credit-card-sized High Performance Board.
  • 4*USB HOST, 1*HDMI Out, 1*Micro USB, 1*UART, 1*GPIO interface, WiFi and 100M LAN interface,Support Micro SD card.
  • Rockchip RK3128 with Quad-core Cortex-A7 up to 1.2GHz.
  • 40 Pin header enables hardware re-use by maintaining compatible alternate pin functions like I2S, I2C, PWM, UART, and GPIO. Form-factor compatible with Raspberry Pi 3 for easy migration..
  • Form Factor & GPIO Compatibility with Raspberry Pi for Maximum Re-usability.
Check Stock

KEYESTUDIO Automatic Smart Plant Watering Kit for Arduino, Automatic Watering System for Your Plants

  • New Flexible Microcontroller Board --- Raspberry Pi Pico is a tiny, fast, and versatile board. It's based on RP2040 chip, which features a dual-core Arm Cortex-M0+ processor with 264KB internal RAM and support for up to 16MB of off-chip Flash, flexible clock running up to 133 MHz..
  • Multi-Function GPIO Pins---It has 26 multifunction GPIO pins, including 3 analogue inputs, 2 × UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels..
  • Rich Peripheral Set---A wide range of flexible I/O options includes I2C, SPI, and — uniquely —8 × Programmable I/O (PIO) state machines for custom peripheral support..
  • Multiple Software Support---Raspberry Pi Pico has rich and complete software support and community resources. Programmable in C and MicroPython. Drag-and-drop programming using mass storage over USB..
  • This kit includes a Rpi Pico with headers soldered, 3-pin yellow header,830 breadboard, Doupont wires and micro USB cable..
Check Stock

Libre Computer Board AML-S905X-CC Le Potato 64-bit 4K Media SBC and Pi 3 B+ Alternative (2GB 2-Pack)

  • LATEST 2022 SOFTWARE SUPPORT: Ubuntu 22.04 LTS and Raspbian 11 64/32-bit with support for hardware-accelerated video playback and 3D graphics. Upstream software stack featuring the latest Linux 5.19 with open source graphics and video libraries. Most PC-like single board computer on the market with images based on UEFI booting and GRUB. For Raspbian, please run libretech-raspbian-portability from our Github on your Raspberry Pi first. Guide available on YouTube..
  • COMPATIBILITY AND EXTENSIBILITY: Form factor compatible with the Pi 3 for re-use with existing cases and power supplies. 40-pin header enables hardware re-use by maintaining compatible GPIO pin functions like SPI, I2C, PWM, and UART. Our powerful GPIO wiring tool, libretech-wiring-tool, is available on Github that can quickly translate from header or BCM GPIO numbers to sysfs and gpiod numbering. Dynamic dtoverlay support for faster design, testing, and learning..
  • HIGH PERFORMANCE LOW POWER: AML-S905X-CC performs faster than a Pi 3 B+ while using half the power. It is designed with power optimizations to increase sustained performance under load and reduce failures due to input voltage and current. It is one of the first SBCs to support 4K multi-codec hardware decoding and features a highly pe....
Check Stock

risingsaplings rpi gpio io Expansion Extension Module Board for Raspberry Pi 3 2 Pi Model B+ 4 Zero

  • This GPIO extension board is compatible with Raspberry Pi 3, Pi 2, Model B / B+, ZERO and ZERO-W. (For ZERO you need to soldered a 2x20pin header in your Raspberry Pi ZERO).
  • GPIO 1 to 3: 1 row GPIO ports could expanded into 3 rows GPIO ports..
  • All pins are marked with function names..
  • Come with 4pcs double-screw bolt, 8pcs Screws..
Check Stock

DORHEA 10PCS ESP-WROOM-32D ESP32 Bluetooth and WiFi Low Power Module integrates ESP32-D0WD Generic Wi-Fi+BT+BLE MCU Modules for Voice Encoding Music Streaming and MP3 Decoding

  • ESP32-WROOM-32D are powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding..
  • The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications..
  • ESP32-WROOM-32D integrate a 4 MB of external SPI flash. The integrated SPI flash is connected to GPIO6, GPIO7, GPIO8, GPIO9, GPIO10 and GPIO11. These six pins cannot be used as regular GPIOs..
  • Flash integrated on the module and are not recommended for other uses..
Check Stock

HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B.
  • GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion....
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not....
Check Stock

5Pcs GPIO Ribbon Cable for Raspberry Pi Male to Female 40pin Breadboard Jumper Wire Computer Accessories 20cm(Male to Female)

  • The GPIO cable can be connected to a 3.5 inch display for easily use.
  • Professional designed for Raspberry Pi male to female GPIO cable.
  • Possess 20cm length and 40pin in total, enough to meet your demands.
  • This cable wire can be used to extend the GPIO of for Raspberry Pi.
  • GPIO wire can be connected to T board, breadboard and other operations.
Check Stock

HiLetgo GPIO Expansion Board Raspberry Pi Shield for Raspberry PI 4B/3B+ With Screws

  • Raspberry Pi 4B/3B+ GPIO Shield Expansion Board.
  • Multifunction GPIO Extension Board 1 to 3 Port DIY.
Check Stock

MakerFocus Raspberry Pi 4 GPIO Expansion Board Breakout GPIO Screw Terminal Hat Compatible with Raspberry Pi 4b 3b+ 3b 2b b+ Raspberry Pi Zero and Zero W

  • User manual: Please get the link from the product description below.
  • Easy to Assemble - This is a very beautiful screw terminal expansion version, which is expanded for the pins of the Raspberry Pi. Our raspberry pi hat is convenient for everyone to connect when doing electronic experiments..
  • Observe GPIO Status - The status information of the pin is displayed. When the GPIO pin is operated and effective in the terminal, the LED matrix on the right side of the terminal will display the status of the GPIO pin, and some distinctions are made in the color selection of the LED lights..
  • Fine Terminal Pinout - There is the pin out information of the GPIO pin on the top of the terminal and on the side..
  • Different Color LED Indicators - For example, the 5V power light is red, while the 3.3V power light is pink, the light of the special function pin is dark blue, and the indicator light of the ordinary GPIO pin is light blue.
Check Stock

kuman RPi GPIO Breakout Expansion Board + Ribbon Cable + Assembled T Type GPIO Adapter 20cm FC40 40pin Flat Ribbon Cable for Raspberry Pi 3 2 Model B & B+ SC05

  • Assembled RPI GPIO with 8" 40 pin ribbon cable for Raspberry Pi 3B, Raspberry Pi 2 model B, Raspberry Pi 1B+, Raspberry Pi 1a+, Raspberry Pi zero w, Raspberry Pi zero.
  • 40 pins are labeled for easy prototyping.
  • Gpio adapter plus for Raspberry Pi B+, Raspberry Pi 2, Raspberry Pi is not included.
Check Stock

Geekworm Raspberry Pi 4 Case, Pi 4 Heatsink Case, Raspberry Pi 4 Aluminum Passive Cooling Case with Heatsink Pillar for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Only (P232)

  • New version Raspberry Pi 4 passive cooling aluminum case is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 2GB 4GB 8GB version.
  • Design with good heat dissipation, passive cooling design, don't need to install the cooling fan or heatsink..
  • Access to all ports of Raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable and TF card slot reserved..
  • Made of high quality aluminum material. With 4 aluminum columns to contact with the Raspberry Pi 4 chips for better heat dissaption..
  • Note: The Raspberry Pi 4 Model B is not included in the packing list. for Raspberry Pi 4 PSU: Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
Check Stock

Treedix 3pcs GPIO Reference Board Pinout Plus for Raspberry Pi A+, B+, 2, 3, 4

  • This reference board is a very convenient tool to determine the position and function of each pin, which can make it very easy to connect the wire to the Raspberry Pi GPIO.
  • One side of the reference board shows the position, and the other side shows the GPIO number. You can view all the different pin labels of the 2×20 GPIO connector on the Raspberry Pi. By placing it on the connector or next to it, you can quickly check if any wires or components are properly connected.
  • Material: Raspberry Pi GPIO Plus reference pinout is made of glass fiber, and the holes of the reference plate are gold-plated Length: 60.2 /2.37in, width: 20.1mm/0.79in 100% high quality..
  • Use this reference guide to easily connect wires and components to your Raspberry Pi.
  • Compatible with Raspberry Pi models A+, B+, 2, 3 and 4.
Check Stock