Categories

Best Gpu Support Bracket

Cooler Master MasterAccessory ARGB GPU Support Bracket, Edge-Lit ARGB Tempered Glass, Universal GPU Bracket, Multiple Orientations

  • Eliminate Graphics Card Sag: The ARGB 4-Pin GPU Support Bracket eliminates sag by supporting the GPU’s weight-critical points..
  • Edge-Lit ARGB Tempered Glass: CNC-machined tempered glass showcases ARGB lighting throughout the bracket. The lighting can also be turned off for an invisible aesthetic..
  • Easy To Install: With straightforward adjustment of the support, installation is painless..
  • Multiple Orientations: Includes two supports with different orientations for you to either place it at the tail-end, or the side of the GPU..
  • Protect Your Components: Thorough strength testing shows that the glass can withstand the heaviest of cards without flinching..
Check Stock

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- Black

  • New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
  • High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
  • Vertical GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED..
  • Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
  • Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
  • Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
Check Stock

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- White

  • New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
  • High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
  • Vertical GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED..
  • Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
  • Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
  • Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
Check Stock

Thermaltake S300 Tempered Glass Edition ATX Mid-Tower Computer Case with 120mm Rear Fan Pre-Installed CA-1P5-00M1WN-00

  • [4mm THICK TEMPERED GLASS PANEL] - Tool free door lock design, which s durability and style.
  • [BUILT-IN WINDOWED POWER COVER] - Equipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables.
  • [GPU PLACEMENT SUPPORTS] - Specially designed for dual GPU placement options, integrated riser GPU support bracket not only prevents the graphic card....
  • [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With Patented Rotational PCI-E slots, you can choose the way you want to display graphic cards vertically....
  • [DRIVE BAY] - 2 x 2. 5"/3. 5" with HDD Rack + 2 x 3. 5" without HDD Bracket + 2 x 2. 5" with HDD Bracket behind MB Tray.
Check Stock

EZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black

  • Vertical GPU Bracket with RGB LED effects, Synchronizable RGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 pin RGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED..
  • Vertically display a GPU graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler..
  • Designed for most ATX case with at least 7 PCIE slots in the market.
  • The 20cm/7.8in PCIE riser with high quality TPE cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance. Only supports PCIE 3.0.
  • With movable bracket, More flexible in using PC case interior space. NOTE: Please check your case with enough space.
Check Stock

Phanteks PH-EC600PSTG_WT01 Eclipse P600S Hybrid Silent and Performance ATX Chassis -Tempered Glass Fabric Filter Dual System Support PWM hub Sound dampening Panels Glacier White

  • Equipped with Phanteks’ high airflow fabric for maximum cooling and dust filtration. Fully Equipped with dust filters. Weight reinforced sound....
  • Removable magnetic silent panels. Removable tempered glass Side panel. Better cable management with the dual Velcro ties..
  • Psu bracket to help make installing and removing PSU easier. Included air flow cover to prevent hot air from re-circulating. Support intensive....
  • Support massive storage capacity (10x HDD and 3x SSDs). integrated fill and drain port location. Front I/O with Type C Gen 2. Integrated PWM hub....
  • Includes GPU Anti-Sag bracket and vertical GPU mounting bracket (Riser Cable sold separately). Dual system support (ITX upgrade kit sold separately).
Check Stock

Gamital GPU Support Bracket Vertical Bloster - Graphics Card Brace GPU Stand Anodized Aluminum Sag Holder VGA Brace Support for All Universal Gaming nVIDIA GeForce GTX AMD Radeon Graphics Card & More

  • 【Universal VGA Graphics Card Holder for Computer Cases】: As Graphics cards continue to get bigger and heavier, the need for a graphics card support to prevent the video card from sagging and causing video card damaged is needed. The Gamital XK218 vertical GPU brace is a little different but it is no doubt a great investment. Not only is it very cost performance, but it also does its job exquisitely and holds your GPUs up toughly at the same time without damaging or ruining your aesthetics..
  • 【Segmented Slide Design with Thumbscrews】：The support module is equipped with cushioning scratch-proof pad. Tool-less screws are used for fixing the support module. With a anti-shock rubber sticker base and just easy to move and adjust pads support to hold the GPUs, you’re set and ready to go in a matter of minutes. Compatible with traditional ATX, MATX, ITX and long PSU bracket cases, match various universal computer case and motherboard..
  • 【The Workmanship of the Detail Manufacturing Technique】：The universal VAG graphics card support bracket offer corkscrew spin with a very high force, It is very easy to use, just twist the screw up and lock the Locking Nut, it will work stably. Moreover, this GPU Stand is made of three complex processes: polished....
Check Stock

Graphics Card Support Bracket,GPU Brace Video Card Sag Holder/Holster,Single or Dual Slot Cards Black

  • ★HIGH QUALITY - All aviation aluminum alloy material, anodized sand blasting treatment, no deformation, no rust, provide firm and lasting....
  • ★MULTIPLE ADVANTAGES - Many features of multi-functional graphics card bracket(GPU support bracket): All aluminum alloy material, More robust....
  • ★SEGMENTED DESIGN - The multi-mode group sliding adjustment design, support 2 Graphics Cards/CPU fans max, the support module can slide up and....
  • ★HIDDEN MAGNET DESIGN - Stable, this video card bracket has a triangle fixed stability, mechanical system, combined with the hidden base, the....
  • ★WIDE RANGE OF APPLICATIONS - The support module and the base are provided with buffer and anti scratch device gasket. Suitable for all kinds of....
Check Stock

Phanteks (PH-ES916E_BK) Enthoo Elite Extreme Full Tower Chassis Aluminum, Black

  • 4mm sand-blasted aluminum exterior. Tool-less 4mm tempered glass window. Clean interior with aluminum covers – Hidden PSU & Cables. Ambient RGB Illumination.
  • Tri-chamber design – Hidden PSU, Isolated Storage/Cooling Chamber, Main Chamber. Full Size GPU Support. Front I/O with dual system support.
  • Convenient Installation in standing position. Integrated RGB illumination mode and MSI Mystic Light and Asus Aura compatible. Tempered Glass Panel on hinges.
  • 35mm cable management space + additional cable compartment. Equipped with Phanteks’ Velcro cable ties. 2x Phanteks PWM Hubs.
  • Multifunctional cable cover. Swappable panels (performance/silent). Support Dual system (ITX)/ Dual PSU. Vertical GPU mount bracket..
Check Stock

upHere 5V 3-pin Addressable RGB Graphics Card GPU Brace Support Holder,Support Video Card Sag Holder/Holster Bracket-GL28ARGB

  • Graphics Video Card GPU brace bracket kit. Support your cards from sagging and weighing on the motherboard..
  • Designed for a wide range of graphics cards and boards. Low profile for single or dual setups..
  • Customizable Addressable RGB LED Lighting Equipped with Addressable RGB LED lights, GPU RGB Brace provides full lighting for your build, it can be synced with other 5V ADD-RGB devices by M/B..
  • We use high quality and durable Light Guiding material ,with high-end ARGB LED lights which longevity is more than 30,000 hours. This bracket's size is : 280mm（L）*54mm（W）*9mm（H).
Check Stock

NZXT H710i - CA-H710 i-W1 - ATX Mid Tower PC Gaming Case - Front I/O USB Type-C Port - Quick-Release Tempered Glass Side Panel - Vertical GPU Mount - Integrated RGB Lighting - White/Black

  • NEW FEATURES: Front I/O USB Type-C Port, Vertical GPU Mount, Tempered glass side panel with single screw installation, and upgraded Smart Device V2.
  • SMART DEVICE V2: Includes a faster microprocessor for NZXT CAM-powered control of two RGB lighting channels and three fan channels that support either....
  • VERTICAL GPU MOUNTING: Show off your graphic card with a built-in mounting bracket for installing your GPU vertically *PCIe riser card not included.
  • ENHANCED CABLE MANAGEMENT: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive.
  • SPECS: Max GPU Clearance: 413mm, Radiaor Support - Front: 360mm, Top: 360mm, Rear: 140mm.
Check Stock

Michal Tech Hobby Mining GPU Hanger for Wire Rack Pack of 6

  • HOBBY VARIATION - Heat resistant for complete open air system only. High heat tolerant variation for enclosed systems NOW FOR SALE: PROFESSIONAL GPU....
  • SIMPLE and CONVENIENT - Compatible with almost all wire racks.
  • EASY TO INSTALL - This mining bracket is easy to install and is structurally strong. Keep your mining machine organized without spending a fortune on....
  • Full kit includes set of 6 screws and 6 hangers..
  • NOTICE - GPU's with DVI ports may experience compatibility issues. This mining rig bracket is the Bracket Only, does not include Fans or other CPU,....
Check Stock

Phanteks Eclipse G500A Mid Tower Case, DRGB, Black

  • High airflow gaming chassis with Ultra-fine Performance Mesh on front and top that combines high airflow performance with excellent dust filtration..
  • Integrated D-RGB lighting on the front and side that is easy to control and can be expanded and/or synced to a D-RGB equipped motherboard..
  • Three high performance M25-140 D-RGB fans included..
  • Ready for high-end cooling with up to 420 radiator support in front, 360 in the top, full-length GPUs and vertical GPU ready with the optional Vertical GPU Bracket..
  • Easily accessible I/O featuring 10gbps USB-C, 2x USB 3.0, Microphone/Headphone Combo, Power button, and D-RGB Color and Mode buttons..
Check Stock