Categories

Best Gpus For Deep Learning

I Support Vector Machines Neural Network Machine Learning Tank Top

  • Whether you are a mathematician or deep learning scientist working on support-vector-networks or someone into supervised learning models, this AI....
  • Featuring a learning model with clusters and a humorous saying, this information technology pun design is great for any deep learning lover to say Im....
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

I Support Vector Machines Neural Network Machine Learning T-Shirt

  • Whether you are a mathematician or deep learning scientist working on support-vector-networks or someone into supervised learning models, this AI....
  • Featuring a learning model with clusters and a humorous saying, this information technology pun design is great for any deep learning lover to say Im....
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

DIYPC DIY-Model X-W-RGB White Steel/Tempered Glass ATX Mid Tower Computer Case

  • 1. This FebSmart VER006C is a PCIE X1 to PCIE X16 riser. The PCIE riser will extend motherboard PCIE X1 slot out and covert PCIE X1 slot to PCIE X16....
  • 2. This PCIE riser will extend the motherboard PCIE X1 slot out and covert the PCIE X1 slot to PCIE X16 slot, users will have more room to place more....
  • 3. Designed with 3X solid capacitors, 1X voltage transformer and 1X inductance on PCIE Riser, will make sure PCIE data signal get stable and reliable....
  • 4. Packed with 23.6-inch USB 3.0 extension cable, will make sure GPUs flexible connection, easy to place GPUs in more room. Comes with 7.9-inch 15Pin....
  • 5. ATENNTION: The PCIE riser may can not provide enough power for some heavy GPUs when the 6Pin to 15Pin SATA power cable is the only power supply.....
Check Stock

SENKAUTO Mining Rig Case 8 Ports GPU Mining Frame Case Mining Motherboard 8 Cooling Fans Supported(4 Preinstalled) Mining Machine System with 4GB RMA, CPU (Without GPU/PSU) (Black)

  • Support 8pcs GPUs: The mining rig case support 8 GPUs. Support ATX motherboard, built-in, external dual PSU hosting, PSU mounting, hard drive. 8 GPUs can be installed at the same time, which greatly improve the performance of the BTC/ETH/ETC mining machine case..
  • Generous Space between GPUs: The Gap between GPU ports is about 65mm, it can ensure high performance, low power consumption for mining..
  • Support 8 Cooling Fans: The mining rig case support 8 cooling fans and preinstalled with 4* 2500rpm cooling fan. 2* fan speed controller, you could adjust the fan speed according to your need. Great heat dissipation is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
  • Support ATX/1U/2U Power Supply: The mining rig frame made of highest quality steel, with the finest craftmanship, which is easy to install and has a sturdy structure. With a larger room for power supply, you can install standard ATX PSU directly without modifications. Keeps the machine perfectly organized while it holds the least amount of heat possible..
  • Mining rig case package: Including: motherboard, CPU, power switch line, 4G RAM, 2500rpm cooling fan * 4, fan speed controller*2, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. The miner machine system doesn't in....
Check Stock

Galaxy S9 I Support Vector Machines Neural Network Machine Learning Case

  • Whether you are a mathematician or deep learning scientist working on support-vector-networks or someone into supervised learning models, this AI....
  • Featuring a learning model with clusters and a humorous saying, this information technology pun design is great for any deep learning lover to say Im....
  • Two-part protective case made from a premium scratch-resistant polycarbonate shell and shock absorbent TPU liner protects against drops.
Check Stock

I Support Vector Machines Neural Network Machine Learning PopSockets Swappable PopGrip

  • Whether you are a mathematician or deep learning scientist working on support-vector-networks or someone into supervised learning models, this AI....
  • Featuring a learning model with clusters and a humorous saying, this information technology pun design is great for any deep learning lover to say Im....
  • switch out your PopTop for another design or remove it completely for wireless charging capabilities. (Not compatible with....
  • Expandable stand to watch videos, take group photos, FaceTime, and Skype handsfree..
  • Advanced adhesive allows you to remove and reposition on most devices and cases..
Check Stock

SOONTECH Complete Mining Rig, Crypto Mining Rig Frame for Ethereum, 8 Gpu System Mining Rig, Including Motherboard, CPU, SSD, RAM, PSU(without GPU)

  • Please note: This product includes HP Power 750W (model: HP DPS-750RB A), with a power cord (110V and 220V can be used) when running without noise, very quiet. Does not include GPU and fan. win10 system (not activated, please do not buy if you mind).
  • Eth mining rig, including: motherboard, Intel CPU (with CPU cooler), 128GB SSD, 4G RAM,PSU,Breakout Board ,6 PIN cable to (6 + 8) Pin * 17pcs, ,win10 system. installation instructions。.
  • Two HP Power 750W (MODEL: HP DPS-750RB A) can be used at the same time, please contact customer service for purchase..
  • GPU Port Gap: the port gap between GPUs is 55mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 50mm, otherwise you will just put only less than 4pcs GPUs on the motherboard at the same time..
  • Note: If you have any questions, please contact us. We will solve your problem in time..
Check Stock

FebSmart PCI-E Riser for Bitcoin Litecoin ETH Coin Mining 6 PIN Powered PCIE Extension Cable GPU Riser Ethereum Mining ETH GPU Extension Cable PCIEX1 to PCIE X16 VER006C GPU Riser(Blue 6-PCS)

  • 1.Feb Smart VER006C high performance PCI Express riser can extend the mother board PCIE X1 slot to PCIE X16 slot. Will provide a safe and reliable connectivity with more PCIE X16 graphic cards. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs..
  • 2. Designed 3X high performance solid capacitors,1X voltage transformer and 1X Inductance to make sure voltage and current supply stable. Build in electric circuit protector keep device away from over current, over heat and over voltage..
  • 3. Packed 23.6-inch USB 3.0 extension cable for flexible Graphic card connectivity. Equipped 15Pin SATA to Molex 6Pin power cable provide adequate current for miner rigs GPUs..
  • 4. Simple extend PCI Express X1 slot from mother board to PCI Express X16 slot for heavy GPUs. Added fixed buckle on the PCI Express X16 slot ensure stable GPU connection..
  • 5. Excellent choice for mining rigs. Buy with 30 days warranty. WARNNING:If the PCIE X1 Connector Inserted Reversely, May Damage the Connected GPUs or PCIE Slots..
Check Stock

8 GPU Mining Rig 68mm Slots, Crypto Ethereum Miner Frame with Barebone Motherboard for ETH/ZEC, Cryptocurrency Machine System Case with SSD/RAM (Without GPU/PSU)

  • ...ng Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
  • 【4 Fans Support】 The mining rig case is equipped with 4pcs 3000rpm cooling fans, which can provide airflow allowing for assistive GPU cooling..
  • 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please feel free to contact me and we will provide you with technical support..
  • 【Mining rig case package】 Including: motherboard, Intel CPU, 128GB SSD, 4G RAM,....
Check Stock

PCIE Riser Cable VER006C,GPU Risers for Mining Rigs,GPU Extension Cable,GPU Crypto Currency Mining Cable with 6Pin-SATA Power Cable and 23.6in Extension Cable,Extend PCIE X1 to PCIE X16(PCE-VER006C)

  • 1.GPU Currency Mining Risers: PCE-VER006C is a premium quality PCIE riser cables for Bitcion, Ethereum GPU Mnining Rigs..
  • 2.Enough Power Supply: PCI Express Risers equipped with 20cm (11.81in) SATA to 6Pin power supply cable give GPUs sufficient power supply. Make sure GPUs works in high performance all the time..
  • 3. Expand to PCIE X16: This PCIE riser will extend PCIE X1 from mother board to external PCIE X16 slot for air cool GPU Mining rigs..
  • 4. Safety and Stable Risers: 3X solid capacitors,1X volatge transformer and 1X onductance inductance will prevent PCI Express Device over current,over voltage and over heat..
  • 5. Flexible GPU Connection:60cm/23.6in fully shielded USB 3.0 cable will extend PCIE signal out with little signal loss.Long enough extendsion cales will let user easy to place GPUs..
Check Stock

8 GPU Mining Rig Frame 68mm Slots with 8 Fans, Cryptocurrency Mining Machine with Barebone Motherboard for ETH/ Ethereum, Miner Case with RAM, SSD

  • ...ng Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
  • 【8 Fans Support & Fan Controller 】 The cryptocurrency mining rig is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please feel free to co....
Check Stock

ROSENBLATT PERCEPTRON Neural Network Deep Learning AI T-Shirt

  • A Rosenblatt perceptron is the simplest form of artificial neural network. Based on a neuron, it is the foundation for deeper nets that enable deep learning..
  • If you like deep learning and artificial neural networks, you will love this simple Rosenblatt Perceptron design. Ideal for big data buffs, computer science geeks and AI nerds.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

DAYLEAD Mining Rig Case 8 GPU Mining Case with Mining Motherboard Support 8 Cooling Fans(4 Preinstalled) for BTC/ETH/ZEC GPU Mining Rig (Without GPU, PSU)

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports, which means you can install 8pcs of GPUs on the motherboard at the same time. We have also tested the rig with various GPUs to ensure that it’s compatible with a wide range of graphics cards. Please note that only the same type of GPUs can be installed at the same time..
  • 【8 Cooling Fans Supported】The mining rig case support 8 cooling fans. It is equipped with 4*120mm Silent cooling fans and 2* fan speed controller. More quite, accelerating the air convection, excellent heat dissipation performance, keep the graphics card running at high performance. Add 1*80mm CPU cooling fan..
  • 【A stable machine】The 8 GPU mining rig frame is made of high-quality steel, strong, durable, and available for repeated addition, Easy to set up, It’s a stable machine that’s incredibly easy to set up and requires little maintenance, making it an ideal rig for mass scaling..
  • 【Low Consumption】The consumption of the GPU mining rig system is less than 150watt. Supports Windows10/LINUX operation system..
  • 【Kindly Note】New version of mining case MC03 suitable for most of the mining case power supplies on the market (1U, 2U, ATX). You need to purchase and install your own PSU, Hard drive, and GPU to wo....
Check Stock