Categories

Best Gpus For Mining Ethereum

SUOHUI GPU Mining Rig Complete System for Ethereum Classic ETC, ETH, RVN, Flux, Ergo Crypto Miner with 8 GPU Mining Motherboard,PSU, RAM,SSD, Stackable Mining Frame Machine(Without GPUs)

  • ...gn with adjustable fan speed controller, fully accelerating airflow to achieve the ultimate cooling effect. Let you easily enjoy the fun of mining at home..
  • 【Professional GPU Mining Rig】: SUOHUI mining rig is a complete mining system for cryptocurrency mining like ETH, Ethereum Classic ETC AE BEAM CFX ERG RVN SERO GRIN. This GPU miner has been professionally installed and tested before sending, you can easily startup within minutes. Including gpu mining motherboard,CPU, 128GB SSD, 8G RAM, 1800W PSU, and 4 silent cooling fans. Preinstalled Win10 (not activated), also support Hiveos, RaveOS, PiMP OS, or other systems..
Check Stock

8 GPU Mining Rig Frame 68mm Slots with 8 Fans, Cryptocurrency Mining Machine with Barebone Motherboard for ETH/ Ethereum, Miner Case with RAM, SSD

  • 【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
  • 【8 Fans Support & Fan Controller 】 The cryptocurrency mining rig is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please....
Check Stock

Mining Rig Frame 8 GPU 70mm Slots with 8 Fans Crypto Ethereum Miner Case with Barebone Motherboard for ETH/ZEC Cryptocurrency System Machine with SSD/RAM Without GPU/PSU

  • 【8 GPU Mining Rig Parameter】Inter1(R) Celeron B75 Motherboard: 8X PCI-E spacing 70MM.
  • 【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. The mining case support 8 PCS 3070/6800/6800XT 6900/6900XT GPUs....
  • 【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans....
  • 【4 USB Ports】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 4 USB ports,....
  • 【Mining rig case】The rig doesn't come with GPU and PSU. Including: motherboard, CPU, power switch line, 128GB SSD, 4G RAM, 2500-4500 rpm cooling....
Check Stock

Crypto Miner Sci-Fi Futuristic T-Shirt

  • Are you a cryptocurrency miner? this awesome unique and futuristic. Or get it as a gift for that friend who is a crypto maniac and has a gigantic rig of gpus mining some altcoins who would love this! bitcoin, ethereum, litecoin, altcoin miner..
  • Make sure you get the perfect size for you to keep mining with this Crypto Miner clothing. Wear while day trading BTC, ETH and LTC. You'll be has hot has your gpu rigs. Keep mining altcoins and make blockchain safer..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

8 GPU Mining Rig 70mm Slots with 2000W Power Supply, 8 Fans Crypto Coin Miner Frame with Barebone Motherboard for Ethereum, Cryptocurrency Mining Case with SSD/RAM (Without GPU)

  • ...mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【 5 USB Ports 】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 5 USB ports. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【Mining rig package】 Note: Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU/PSU from overheating. Including: motherboard, CPU, power cord, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. The miner machine system doesn't come with GPU..
Check Stock

FebSmart PCI-E Riser for Bitcoin Litecoin ETH Coin Mining 6 PIN Powered PCIE Extension Cable GPU Riser Ethereum Mining ETH GPU Extension Cable PCIEX1 to PCIE X16 VER006C GPU Riser(Blue 6-PCS)

  • 1.Feb Smart VER006C high performance PCI Express riser can extend the mother board PCIE X1 slot to PCIE X16 slot. Will provide a safe and reliable connectivity with more PCIE X16 graphic cards. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs..
  • 2. Designed 3X high performance solid capacitors,1X voltage transformer and 1X Inductance to make sure voltage and current supply stable. Build in electric circuit protector keep device away from over current, over heat and over voltage..
  • 3. Packed 23.6-inch USB 3.0 extension cable for flexible Graphic card connectivity. Equipped 15Pin SATA to Molex 6Pin power cable provide adequate current for miner rigs GPUs..
  • 4. Simple extend PCI Express X1 slot from mother board to PCI Express X16 slot for heavy GPUs. Added fixed buckle on the PCI Express X16 slot ensure stable GPU connection..
  • 5. Excellent choice for mining rigs. Buy with 30 days warranty. WARNNING:If the PCIE X1 Connector Inserted Reversely, May Damage the Connected GPUs or PCIE Slots..
Check Stock

8 GPU Mining Rig, Complete Ethereum Crypto Miner Mining Machine System Case with 4U 2000-3000W Power Supply ＆ 8 Cooling Fans, ETHW/ETC Miner Frame with Motherboard/CPU/Windows System (Without GPU)

  • ...supply, motherboard, CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package.The new version of mining case has 5 USB ports, enough for daily work. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • √【Mining Machine Case】The Complete ethereum miner case is made of high quality steel material which is sturdy and durable, can fully protect your GPU and electronic devices from damage. The crypto miner case is compatible with Windowx /Linux/OS. 8 GPUs can be installed on the motherboard at the same time, and we do not recommend mixing GPUs of various types..
Check Stock

FrSky Access 900MHz Long Range R9 Mini-OTA Receiver

  • 1.GPU Currency Mining Risers: PCE-VER006C is a premium quality PCIE riser cables for Bitcion, Ethereum GPU Mnining Rigs..
  • 2.Enough Power Supply: PCI Express Risers equipped with 20cm (11.81in) SATA to 6Pin power supply cable give GPUs sufficient power supply. Make sure....
  • 3. Expand to PCIE X16: This PCIE riser will extend PCIE X1 from mother board to external PCIE X16 slot for air cool GPU Mining rigs..
  • 4. Safety and Stable Risers: 3X solid capacitors,1X volatge transformer and 1X onductance inductance will prevent PCI Express Device over current,over....
  • 5. Flexible GPU Connection:60cm/23.6in fully shielded USB 3.0 cable will extend PCIE signal out with little signal loss.Long enough extendsion cales....
Check Stock

MLLIQUEA 8 GPU Ports Mining Rig, Crypto Complete Mining Frame Machine with 2500W Mining Power Supply, Barebone B75 Motherboard for ETH with 8 Cooling Fans, Miner Frame Case with PSU, RAM, SSD

  • ...on - Upgraded version of the 8 fans with adjustable speed (2500rpm-4500rpm). If you feel that the fan is very noisy at work, you can adjust the fan speed regulator to reduce the rotation speed and reduce the noise. Low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum, and any other cryptocurrency..
  • Excellent Customer Service - Please read the manual before use. If you are not completely satisfied with your purchase for this miner, just contact us, and we will give you a satisfactory answer within 24 hours, You take no risk orders from MLLIQUEA..
Check Stock

PCIE Riser Cable VER006C,GPU Risers for Mining Rigs,GPU Extension Cable,GPU Crypto Currency Mining Cable with 6Pin-SATA Power Cable and 23.6in Extension Cable,Extend PCIE X1 to PCIE X16(PCE-VER006C)

  • 1.GPU Currency Mining Risers: PCE-VER006C is a premium quality PCIE riser cables for Bitcion, Ethereum GPU Mnining Rigs..
  • 2.Enough Power Supply: PCI Express Risers equipped with 20cm (11.81in) SATA to 6Pin power supply cable give GPUs sufficient power supply. Make sure GPUs works in high performance all the time..
  • 3. Expand to PCIE X16: This PCIE riser will extend PCIE X1 from mother board to external PCIE X16 slot for air cool GPU Mining rigs..
  • 4. Safety and Stable Risers: 3X solid capacitors,1X volatge transformer and 1X onductance inductance will prevent PCI Express Device over current,over voltage and over heat..
  • 5. Flexible GPU Connection:60cm/23.6in fully shielded USB 3.0 cable will extend PCIE signal out with little signal loss.Long enough extendsion cales will let user easy to place GPUs..
Check Stock

PXY-ELEC Complete 8GPU Mining rig System. B85 Full Mining Machine Includes Mining Motherboard ,CPU,(256) SSD,(8) RAM and PSU.Used for Build GPU Frame Mining rig ETH Miner(Without GPU)

  • ..., the B85 can be equipped with an additional layer (with support columns).more space-saving and organized. It is recommended not to exceed 4 layers.
  • The GPU interface spacing is about 65mm, enough spacing to ensure good heat dissipation is a necessary condition for mining any cryptocurrency such as Bitcoin (BTC) and Ethereum (ETC), but also please note that the width of your GPU should not exceed 65MM, otherwise Cannot install 8 GPUs.
  • B85 miner 128GB SSD pre-installed with Windows 10 (not activated) and Hiveos and 16GB USB. Can be modified to RaveOS, PiMP OS or other operating systems..
  • Customer service: If you encounter problems during use, please contact us, we will reply within 8 hours, please understand because of the time difference,.
Check Stock

8 GPU Mining Rig Frame with Mining Motherboard/SSD/RAM/CPU/Cooling 4 Fans ,Crypto Ethereum Mining Rig Case 8 GPU Slots for Cryptocurrency Bitcoin/Crypto ETH Miner (Without GPU and PSU)

  • 【Mining Rig Frame 】:It is specially designed for cryptocurrency mining (Monero/Ethereum/Ripple/Zerocoin/other)，with 8 GPU slots (but without GPU), has 4 USB ports and 1 VGA ports.Support single power supply(Two cables of the power supply are connected to the motherboard, and the remaining eight cables are connected to the GPU. The power supply can directly supply power to the GPU, and there is no need to supply power to the GPU from the motherboard. ).
  • 【8 GPU -16X Slots】: 8* Pcie 3.0 slots on mining motherboard.The spacing between each GPU slot is 65mm (about 2.56in)，gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,because 3060 GPU need dedicated motherboard)..
  • 【Upgrade Material】：Our mining GPU frame case is made of high-quality steel, the surface is flat and smooth, and the internal space is large. The internal motherboard design is great, the overall size of the chassis is 27.55in*15.75in*6.69in..
  • 【ETH Mining rig case Including】:motherboard, Intel CPU (with CPU cooling plate*1), power cord, 128GB mSATA SSD, 4G DDR 3, 5200 rpm cooling fan * 4, 8*(6+2)Pin graphics power cable (motherboard and fan power,all cables are 12V),screws*12, power switch....
Check Stock

Mining Rig Case 8 GPU Mining Case with 8 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for ETH/ZEC GPU Mining Rig Cryptocurrency System Machine

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports,and the GPU interface spacing is about 70mm. You can install 8pcs of GPUs on the motherboard at the same time. It’s compatible with a wide range of graphics cards..
  • 【8 Powerful Cooling Fans】The mining rig case include 8 powerful cooling fans. More quite, accelerating the air convection,the design of one air volume in and one out with more space keep the graphics card running at high performance..
  • 【Safe and Effective】The low power consumption, reduce heat generation, energy-saving, and safe use. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc..
  • 【Mining rig case Including】 motherboard, CPU, power switch line, 4G RAM, 3000 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package..
  • 【Tips】The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply Hard drive, and GPU to work normally. Please feel free to contact us if you have any questions..
Check Stock