Categories

Best Graphics Card For Ethereum Mining

ACTIMED PCIE Riser 1X to 16X GPU Riser (6PIN/MOLEX/SATA Powered) 10 Capacitors, PCI Express Risers Adapter Card for BTC/ETH/GPU Mining Rigs, with 60cm USB 3.0 Cable and LGB-7 Color Lights, 6 Pack

  • ...IE X1 slot to PCIE X16 slot. Will provide a safe and reliable connectivity with more PCIE X16 graphic cards. Will be mainly used on BTC Ethereum Mining rigs or GPU Mining rigs..
  • 【10 High-quality solid capacitors】10 FP independent solid capacitors are customized for the graphics card power supply. Compared with the general 4-8 capacitors, the graphics card power supply can be more stable and safe. effectively solving the problem of insufficient power supply capacity.Build in electric circuit protector keep device away from over current, over heat and over voltage..
  • 【3 power supply methods】3 power supply methods are used: SATA power interface, 6Pin power interface, and 4-pin interface power supply.Multiple power supply methods solve the problem of power mismatch. Reduces the power supply burden on the motherboard and can be freely selected according to the actual usage environment.(Please reserve 10W power supply for riser when configuring power supply).
  • 【Steel graphics card slot】The middle graphics card slot is a reinforced metal structure. Compared with the plastic bayonet, the metal bayonet has a tighter s....
Check Stock

Miertou VER010S-Plus High Power PCI-E Riser 16x to 1x for Bitcoin ETH Coin Mining,Powered Riser Adapter Card, 4 Solid Capacitors,GPU Crypto Currency Mining Cable with USB Power Cable,with LED

  • Miertou VER010S high-performance PCI-E express riser can extend the motherboard PCIEX1 slot to PCIEX16 slot. Will provide a safe and reliable connection with more PCIEX16 graphics cards. It will be mainly used for Ethereum mining rigs or GPU mining rigs..
  • The graphics card power supply adopts 8X solid capacitors to make the graphics card power supply more stable and safer. The extension cable with 6-pin port enhances the power supply and completely solves the problem of insufficient power supply capacity and cable burning..
  • The slot fixing bracket is designed to remove and set up the graphics card. The card will not fall off from the slot. It can be converted into a SATA port and a SATA to 6pin line, so that the power supply of the graphics card is independent of the motherboard..
  • 60cm USB3.0 cable, very soft, easy to place and route. Cables with built-in shielding nets are more stable. PCI-E1x to 16x power riser adapter card with multi-layer shielded cable will not weaken the signal within 3 meters..
  • After-sales service: If you have any questions, please feel free to contact us! , we will reply to you within 24h!.
Check Stock

Mining Rig Case 8 GPU Mining Case with 8 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for ETH/ZEC GPU Mining Rig Cryptocurrency System Machine

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports,and the GPU interface spacing is about 70mm. You can install 8pcs of GPUs on the motherboard at the same time. It’s compatible with a wide range of graphics cards..
  • 【8 Powerful Cooling Fans】The mining rig case include 8 powerful cooling fans. More quite, accelerating the air convection,the design of one air volume in and one out with more space keep the graphics card running at high performance..
  • 【Safe and Effective】The low power consumption, reduce heat generation, energy-saving, and safe use. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc..
  • 【Mining rig case Including】 motherboard, CPU, power switch line, 4G RAM, 3000 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package..
  • 【Tips】The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply Hard drive, and GPU to work normally. Please feel free to contact us if you have any questions..
Check Stock

Ziyituod 6 Pack PIC-E Riser Express Cable VER010S GPU Riser Express Kits ,with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable

  • 【VER010S-Plus】VER010S-Plus Version PCIe riser kit are the best solution for setting up Ethereum/Bitcoin and other GPU mining rigs..
  • 【Stable and Safe】: The graphics card power supply adopts 8 imported large solid capacitors to make the graphics card power supply more stable and safe..
  • 【Riser Adapter Card】: Two 6PIN+MOLEX interface to enhance the power supply capacity, so that the power supply of the graphics card is independent of the motherboard, thereby reducing the burden on the connection between the motherboard and multiple graphics cards..
  • 【Rugged Cable】: The PCI-E connector uses multi-layer shielded wire, which can be connected to up to 3M without signal attenuation. The 60CM USB cable is soft and stable, and the graphics card can be placed at will..
  • 【WIDELY APPLICABLE】: Suitable for all Window systems, LINUX and MAC..
Check Stock

Fanhasi 8 GPU Mining Rig Frame Case for ETH Crypto Miner with 8 GPU Mining Motherboard & 2000W Power Supply & 128GB SSD & 4G RAM & 8 Cooling Fans (Without GPU)

  • 8 GPU Slots Mining Rig System: Designed for Ethereum miner, you can put at most 8 Pcs GPU cards in the mining case. 65mm gap between each GPU ports gives the video cards enough space for air circulation for cooling. It's fit for most GPU card except 3060. NOTE: GPU cards are NOT Included.
  • 110V - 264V Input Power Supply: Built in 2000W PSU is designed for mining rig with up to 90% conversion efficiency. 110V - 264V universal AC input design allows you to enjoy mining at home easily. Without any modifying, it can work at a household voltage of 110V..
  • 8 Pcs Powerful Cooling Fans: This ETH mining rig case comes with 8 PCS adjustable cooling fans which help to accelerate air convection and keep the GPU card working at high performance. With the help of controller, you can control the fan speed to reduce the noise..
  • Case Type Mining Machine: The Ethereum miner case is made of high quality steel material which is sturdy and durable, can fully protect your GPU and electronic devices from damage. NOTE: GPU cards which are longer than 12.6 inch / 32cm in length are UNAVAILABLE for this mining rig..
  • Mining Rig Including: B75 motherboard, 2000W Supply Power (110V - 264V input ), CPU, 128GB mSATA SSD, 4G DDR3, 8 PCS 4500 RPM cooling fans. (NOTE: GPU cards are NOT Inc....
Check Stock

BEYIMEI PCI-E 1X to 16X Riser Card, 10 Capacitors,PCI-E Riser for Bitcoin Litecoin Ethereum Mining ETH,with USB 3.0 Extension Cable, 6PIN SATA Power Cable – GPU Extender Riser Card – (V013-PRO,1 Pack)

  • √【PCI-E 1X to 16X riser card】: The high-performance V013-PRO version expands the motherboard PCI-E X1 slot into a PCI-E X16 slot. Mainly used for Ethereum mining equipment or GPU mining equipment..
  • √【10 capacitors, safer! 】: Use 10 high-quality solid capacitors to ensure stable voltage and current, making the graphics card power supply more stable and safe..
  • √ 【Temperature control display】: The default setting is “temperature” when the machine is turned on. Press once to display Fahrenheit, press twice to display voltage (12V), press and hold the switch for 5s to turn off or turn on the display and LED lights. When the temperature reaches 75 degrees, the display will flash and alarm..
  • √ 【Strong power supply】: 6PIN port power supply, making the graphics card power supply independent of the motherboard, reducing the burden on the motherboard when multiple graphics cards are connected..
  • √【Wide scope of application】: Plug and play, no need to install drivers. A 60 cm USB 3.0 cable for flexible placement of PCI-E devices, helping users to obtain more flexible GPU connections..
Check Stock

PXY-ELEC Complete 8GPU Mining rig System. B85 Full Mining Machine Includes Mining Motherboard ,CPU,(256) SSD,(8) RAM and PSU.Used for Build GPU Frame Mining rig ETH Miner(Without GPU)

  • B85 miner is a standalone mining system that supports AMD/NVDIA GPUs . Including: mining machine motherboard, Intel CPU 1840/1820 (with CPU cooler), SSD (256GB), RAM (8G), PSU (1800w), 4 fans (silent), single metal frame, only need to prepare graphics card and monitor , mouse, keyboard run.
  • B85 rack-mounted mining machine, professional silent design, accelerated air convection, excellent heat dissipation design. Noise: 26.65 (dB-A) or lower, [1800w silent power supply]: The power input voltage is AV 110-230V, and the power conversion efficiency is as high as 92%, allowing you to enjoy the fun of electricity while mining..
  • The B85 rack-mounted miner is made of steel and iron, and the length of the graphics card is not limited. If you have purchased multiple miners of the same model, the B85 can be equipped with an additional layer (with support columns).more space-saving and organized. It is recommended not to exceed 4 layers.
  • The GPU interface spacing is about 65mm, enough spacing to ensure good heat dissipation is a necessary condition for mining any cryptocurrency such as Bitcoin (BTC) and Ethereum (ETC), but also please note that the width of your GPU should not exceed 65MM, otherwise Cannot install 8 GPUs.
  • B85 miner 128GB SSD pre-installed with Windo....
Check Stock

MLLIQUEA 847 Mining Motherboard, 8 GPU Slots Mining Machine System, Cryptocurrency Miner Barebone Motherboard for BTC/ETH/ZEC with SSD, RAM

  • ...equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use..
  • Note - The GPU miner machine system doesn't come with GPU or PSU. Our mining rig frame also can be used for RTX 3080/3090, but we recommend that you install 4-6 graphics cards, because after exceeding, the motherboard will automatically limit the computing power of the graphics card. You need to install your own power supply to work, and our motherboard only supports a single power supply. If you want to use a multi-channel power supply, you need to short-circuit it..
Check Stock

Ubit 6 Pack Latest PCI-E GPU Riser Express Cable 16X to 1X 6pin / MOLEX/SATA with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card

  • Slot color is sent randomly:Due to the shortage of raw materials, we have purchased the 2 color card slot for production, randomly send, it does not....
  • More Port option: molex, SATA and Graphic card 6PIN interface, three interface optional. The top of the line solution for setting up Ethereum mining....
  • LED indicator and fuse are used on the board: Indicates the connection status between your devices..
  • 3 Solid Capacitors deliver power to Graphics stably and Added coil to prevent interference,Long time work will produce electromagnetic waves,affecting....
  • 60cm USB 3.0 cable, very soft and easy to place and route. Cable with shield net inside is more stable for mining. PCI-E 1x to 16x powered riser....
Check Stock

SUOHUI GPU Mining Rig Complete System for Ethereum Classic ETC, ETH, RVN, Flux, Ergo Crypto Miner with 8 GPU Mining Motherboard,PSU, RAM,SSD, Stackable Mining Frame Machine(Without GPUs)

  • 【Stackable Frame Mining Machine】: This mining frame is made of high-quality material, reinforcing the mobo with14 screws to protect it from being overshaped. The open-air frame ensures that the graphics card is not limited in length. You can easily stack multiple SUOHUI mining rigs at will without covering too much space..
  • 【8 GPU Mining Motherboard】: Our mining rig has installed a 8 GPU slots mining motherboard with SSD,RAM,CPU. 65mm spacing provides enough space between GPUs, suitable for AMD/NVIDIA GPUs. Note: The width of GPUs should not exceed 65mm..
  • 【1800W Stable Mining Power Supply】:This mining power supply uses 4U PSU rated output 1800W 12V full-voltage, can work under (110-220v）.10 long-line cables with 16x8 (6+2) pins and 6x6 pins, which can powers the mobo and GPU directly. Effectively improve conversion efficiency and reduce power loss..
  • 【4*4500rpm Silent Cooling Fans】4*4500rpm GPU cooling fans, professional silent design with adjustable fan speed controller, fully accelerating airflow to achieve the ultimate cooling effect. Let you easily enjoy the fun of mining at home..
Check Stock

BEYIMEI PCI-E 1X to 16X Riser Card, with 0.6 m USB 3.0 Extension Cable & 6PIN SATA Power Cable - GPU Extender Riser Card - for Bitcoin Ethereum Mining ETH (VER009S,6 Pack)

  • 【PCI-E 1X to 16X Riser Card】: VER009S-PLUS Version PCIe riser kit are the best solution for setting up Ethereum/Bitcoin and other GPU mining rigs.At the same time used with (ASIN:B094FRYRB3) can provide fast data transmission speed..
  • 【Stable and Safe】: The graphics card power supply adopts 8 imported large solid capacitors to make the graphics card power supply more stable and safe..
  • 【Reduce the burden on the motherboard】: the adapter card’s 6PIN interface enhances the power supply, and it can be converted to a SATA port with a SATA to 6PIN line to make the graphics card’s power supply independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected..
  • 【Rugged Cable】: 60 cm USB 3.0 cable for flexible placement of PCI-E devices. The PCI-E connector uses multi-layer shielded wire, which can be connected up to 3M without signal attenuation..
  • 【Support System】: compatible with all WINDOWS systems, LINUX, MAC.
Check Stock

MLLIQUEA 8 GPU Mining Rig Frame Case, Cryptocurrency Mining Machine System & Platform, Barebone Motherboard for ETH with 6 Cooling Fans, Miner Frame Case with SSD, RAM(Without PSU/GPU)

  • ...ernal power supply can directly use the male to male cables we give away. For detailed wiring, please refer to the picture or contact us..
  • Safe and Effective - It can be low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum (ETC), and any other cryptocurrency.(Graphics cards longer than 320mm cannot be used.) Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use..
  • Note - The GPU miner machine system doesn't come with GPU or PSU. Our mining rig frame can be used for rtx 3080/3090, but we recommend that you install 4-6 graphics cards. After exceeding, the motherboard will automatically limit the computing power of the graphics card. You need to install your own power supply to work, and our motherboard only supports single power supply. If you want to use a multi-channel power supply, you need to short-circuit it..
Check Stock

VTRETU GPU Mining Rig， Ethereum Classic Crypto Miner ，with 8 GPU Mining Motherboard and 2000W Power Supply（110-264V） 8 Cooling Fans ，SSD,RAM，CPU,Windows 10(Excluding GPU) White

  • ...ves the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,need dedicated motherboard).
  • 【8 Powerful Fans 】 : This mining rig case is equipped 8*4500rpm cooling fan, 4 (Air in) + 4 (Air out),so it can accelerate air convection to keep the graphics card running at high performance. And with wind speed regulator, can reduce the temperature of the mainboard and GPU working environment effectively.
  • 【Mining rig Including】 : B75 motherboard, 2000W Supply Power, CPU,128GB SSD, 4G DDR 3, 4500 rpm cooling fan * 8. win10 system (not activated) (NOTE: GPU cards not include). Professionally installation and fully tested. Avoide unkown failures and save your time. Plug in the GPU to work immediately. Complete case design: dust&moisture-proof, safe&professional. Protect your mining machine. If you have any problem or received damaged goods , please feel free to contact us..
Check Stock