Categories

Best Gray Iron Sand Casting

2.2lbs Delft Clay Casting Gold Silver Copper-Based alloys, Pewter

  • ✅ The Delft Clay Method is a highly refined form of sand casting that substitutes genuine Delft Clay from Holland for ordinary casting sand. The process was invented by Hans Karreman, a Dutch goldsmith. Delft Clay is much finer than casting sand, providing remarkably sharp and highly detailed castings in gold, silver, copper-based alloys, pewter, etc..
  • ✅ Castings require very little finishing work. Once you have cast your piece, the Delft Clay can be re-used. Since this is a cold-molding process, molds can be made from patterns composed of wood, wax, epoxy, plastics, and, of course, metal. Because this is a type of sand casting, it is best suited to producing castings without pronounced undercuts..
Check Stock

NOVA3D Wax Resin for LCD 3D Printer 405nm UV-Curing 3D Printer Resin to Jewelry Design Dental & Garage Kits 1000ml

  • 【3d Resin】IFUN 3d casting resin uses special formulas, featuring low thermal expansion coefficient, burns out at high temperature, leaving no....
  • 【Easy to Casting】IFUN 3d resin. No residue, no sand pit, smooth surface, low casting temperature, short casting time. Easy to print a variety of....
  • 【High Precision】This 3d cast resin printing model features smooth surface, showing high precision in details, perfect to cast jewelry..
  • 【Wide Applications】IFUN castable resin has been designed to cast your pieces in bronze, copper, tin or iron, using standard vacuum investment....
  • 【Notice】Please shake well before use. Printed models need to use concentration of 95% alcohol to clean..
Check Stock

RESIONE 3D Printer Resin C01 Dental Castable Resin High Precision for Direct Investment Casting Excellent Fluidity No Post-Curing Required for 3D Printing

  • 【3d Resin】IFUN 3d casting resin uses special formulas, featuring low thermal expansion coefficient, burns out at high temperature, leaving no....
  • 【Easy to Casting】IFUN 3d resin. No residue, no sand pit, smooth surface, low casting temperature, short casting time. Easy to print a variety of....
  • 【High Precision】This 3d cast resin printing model features smooth surface, showing high precision in details, perfect to cast jewelry..
  • 【Wide Applications】IFUN castable resin has been designed to cast your pieces in bronze, copper, tin or iron, using standard vacuum investment....
  • 【Notice】Please shake well before use. Printed models need to use concentration of 95% alcohol to clean..
Check Stock

PHTW Glue Strong Plastic Metal Wood Metal Glass Ceramic Acrylic Adhesive

  • 【Effective Adhesive Agent】developed As an Alternative to Torch Welding,It Provides Strong and Long-lasting Repairs to Metals and Multiple Other Surfaces. It Will Bond Almost Any Clean Surface That is Free of Dirt and Oil..
  • 【Simple to Use】After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded, and drilled after curing. It has a 1:1 mixing ratio, sets in 6 minutes, and fully cured in 4-6 hours..
  • 【High-Temperature Resistant】: Can withstand temperatures up to 150°C. When fully cured, it is as hard as iron and provides uniform bond line thickness..
  • 【Do it Yourself】Big or Small, you can DIY it with this magic welding glue. Our heavy-duty epoxy and adhesives repair & restore it right the first time..
  • 【Wide Use】mainly Used for Iron and Steel Casting, Sand Holes and Pores, and Filling of Casting Defects Such As Cracks. It Can Be Used to Repair Fuel Tanks,Plumbing,Concrete Breaks, and a Whole Lot More..
Check Stock

Cast Iron 2-Part Flask Mold Frame for Sand Casting Jewelry Metal Casting Making Tool

  • Material: This pair of Flask Mold is highly durable and robust vessel made of sturdy cast iron..
  • Cost Effective: These casting mold are extremely price effective thanks to low tooling and equipment cost..
  • Neat and Easy Alignment: Correct alignment of flask mold frames is feasible with four locating pins which hold the frames firmly..
  • Application: It permits you to simply duplicate shapes, metals, coins, rings jewelry items, and other complex shapes with ease..
  • Ample Scope: Ideal to be used with Petro bond, Delft and Sand Casting Clay and metals like Gold, Silver, Copper, Brass etc.
Check Stock

Teton-Black™ Olivine Fine-Mesh Water-Bonded Foundry Casting Sand (10lb)

  • Use for making metal casting molds for a variety of metals ranging from Pewter to Cast Iron.
  • Easy to (re)use, simply add water to maintain moisture.
  • Contains Premium 120 Mesh Olivine (Magnesium Iron Silciate) Raw Sand and Bentonite Blend.
  • Professionally Formulated, Pre-Mulled, and Quality Inspected (100% ready to use).
  • More stable, better finish, safer, and longer life than competing silica sands.
Check Stock

ASHERMAN Chest Seal

  • Mainly Used for Iron and Steel Casting, Sand Holes and Pores, and Filling of Casting Defects Such As Cracks. It Can Be Used to Repair Fuel Tanks, Plumbing, Concrete Breaks, and a Whole Lot More.SILLENORTH.
  • Developed as an alternative to torch welding, it provides strong and long-lasting repairs to metals and multiple other surfaces. It will bond almost any clean surface that is free of dirt and oil..
  • After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded, and drilled after curing. It has a 1:1 mixing ratio, sets in 6 minutes, and fully cured in 4-6 hours. Before using the glue, clean and drying the surface and your work should be complete within 20 minutes after mixing..
  • Yout best solution in times of trouble.Repair cracked or damaged metals back to perfection with the Heat Resistance Metal Repair Adhesive! This should help make your DIY metal repairs easy and fast!.
  • The preparation and application are simple and easy. Just mix, apply, and let it dry for a few hours. The full cure time is up to 24 hours..
Check Stock

Teton Supply Co. -Black (180 MESH) Foundry Green Sand Olivine Extra Fine Facing Sand for Metal Casting (48LB)

  • Use for making metal casting molds for a variety of metals ranging from Pewter to Cast Iron.
  • Easy to (re)use, simply add water to maintain moisture.
  • Ultra-fine formulation--Premium 180 Mesh Olivine (Magnesium Iron Silciate) Raw Sand and Bentonite Blend.
  • Professionally Formulated, Pre-Mulled, and Quality Inspected (100% ready to use).
  • More stable, better finish, safer, and longer life than competing silica sands.
Check Stock

Megacast Cast Iron 2-Part Flask Mold for Delft Sand Casting Jewelry Making Tool

  • Cast iron mold for use with sand casting clay. Allows you to easily duplicate shapes, metals, coins, jewelry pieces, and more!.
  • Measures: outer 4 7/8" x 3 1/2" x 2 1/4" not including neck and inner size 4-3/8" x 3 7/8" x 2 1/4"..
  • Neat and Easy Alignment: Correct alignment of flask mold frames is feasible with four locating pins which hold the frames firmly..
  • Material: This pair of Flask Mold is highly durable and robust vessel made of sturdy cast iron..
  • Allows you to cast highly detailed silver, gold, bronze, copper, and more.
Check Stock

Teton-Black (180 MESH) Foundry Green Sand Olivine Super-Fine Facing Sand for Metal Casting (17.5LB/8KG)

  • Use for making metal casting molds for a variety of metals ranging from Pewter to Cast Iron.
  • Easy to (re)use, simply add water to maintain moisture.
  • Ultra-fine formulation--Premium 180 Mesh Olivine (Magnesium Iron Silciate) Raw Sand and Bentonite Blend.
  • Professionally Formulated, Pre-Mulled, and Quality Inspected (100% ready to use).
  • More stable, better finish, safer, and longer life than competing silica sands.
Check Stock

Fullkk Magic High Temperature Resistant Liquid Metal Welding Filler, Appliances Casting Repair Glue, Metal Repair Gel Paste (1 Set(A+B), 20g)

  • 【Liquid Metal Welding Filler】: Developed as an alternative to torch welding, it provides strong and long-lasting repairs to metals and multiple other surfaces. It will bond almost any clean surface that is free of dirt and oil..
  • 【Castings Repair Glue】Mainly used for iron and steel casting, sand holes and holes, and casting defects such as cracks. It can be used to repair fuel tanks, pipes, concrete breaks, and a whole set of more..
  • 【High-Temperature Resistance】Welding glue for metal, can withstand a temperature of 150°C. When fully cured, it is as hard as iron and provides uniform bond line thickness..
  • 【Simple To Use】A permanent adhesive is formed after mixing, which can be shaped, beaten, filed, sanded, and drilled after curing. It has a 1:1 mixing ratio, 6 minutes setting, and complete curing within 4-6 hours. Before using the glue, clean and dry the surface and finish the work within 20 minutes after mixing..
  • 【Do it Yourself】Big or Small, you can DIY it with this magic welding glue. Our heavy-duty epoxy and adhesives repair & restore it right the first t....
Check Stock

Hi-Flame Fireplace Tray-Expandable/Adjustable Ash Pan with Handles for Up to 30 Fire Place Grate-Nuts and Bolts Included Sliver Color

  • Louvered door opens for pushing debris in when cleaning the fire box.
  • This Ash Dump cover fits into the floor of the fireplace.
  • Made of cast iron, solid coated sand casting cast iron construction with matt black finish.
Check Stock

Loctite Heavy Duty Epoxy Gel, Quick Set, 0.85-Fluid Ounce Syringe (Pack of 8)

  • 【Good Bonding Strength】This metal repair paste forms a strong and stable permanent bond, which can last a long time. According to different uses, it can be shaped, tapped, filed, sanded and drilled..
  • 【Effective Adhesion】Form a strong and stable permanent bond, this metal repair paste can provide a strong and long-lasting repair to metal and multiple other surfaces. It can bond almost any clean surface without dirt and oil..
  • 【High Temperature Resistance】Can withstand temperatures up to 150°C. After fully cured, it is as hard as iron and provides a uniform adhesive layer thickness..
  • 【Multi-purpose】This metal repair paste is mainly used to fill casting defects such as steel casting, sand holes, pores, and cracks. It can also be used to repair fuel tanks, pipelines, concrete cracks, etc..
  • 【Easy to Apply】Simple drying application programming. It is simple and convenient. Just mix, apply and let it dry for a few hours. Full curing time is up to 24 hours..
Check Stock