Categories

Best Grease For Mower Spindles

LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 1-1/16 Straight Spindle 2000lbs Axles- 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug.
  • pls noted, this hub fit straight spindles, not for tapered spindles.
Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Fourtry Spindles Fit for Craftsman 42 inch Deck Mower - Deck Spindle Fit for Poulan HU Sears Craftsman LT1000 LT2000 LTX1000 Riding Mower with 36' 38' 42' Cutting Deck, Replace 130794, 137641, 2 Pack

  • Compatible with most popular 36" 38" 42" cut lawn mower models: ① Craftsman: LT1000, LT2000, LTX1000, DLT 3000, YT3000 tractor ② Poulan: PP11536, PP1036S, PP1136J, PP11536KA lawn tractor..
  • Also work with: ③HU: CT 130, CTH 130, CTH 150, LR 12, LR 120, LR 121, LR 122, LT 100, LT 120, LT 1238, LTH 130, LTH 1342, LTH 140, LTH 145, YTH 150, YTH 1542, YTH 160, YTH 180, YTH 1842, YTH 190, YTH 1942 riding mower, etc. More information please refer to product details below..
  • Greasable: These 3-bolt spindles are pre-greased for direct use and are greasable for maintenance. Note: Spindle has no zerk fitting..
  • Easy to install: Comes with 2 spindles, each spindle equiped with pulley lock nut, blade bolt, washer, spacer, 3 threaded mounting bolts (the mounting holes are also threaded) and 5 pointed star-shaped design blade mount..
  • Replaces OEM part: AYP/ Roper/ Sears: 128285, 130794, 133172, 137641, 137645, 532128285, 532130764, 532133172. 532137645. HU: 532130794, 532-130794..
Check Stock

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Time Traveler 0 Nuke Day 2.0

  • 【Application】The mulching mower blade kit is ideal for cutting tall grass, creating a vertical angle that maximizes airflow through the blade and provides vertical suction..
  • 【Compatible】The tractor blades are compatible with John Dee re ①102, 105, 115, 125, ②D100, D105, D110, D120, ③LA100, LA105, LA110, LA115, ④X105, X106, X110, X120, ⑤E100, E110, E120, E130, etc lawnmowers..
  • 【Replace OEM Part Numbers】GX22151, GY20850, AM137328, AM141033, AM137333, AM141031, UC21583. Please check the original part number and make sure this part fit your model before purchase..
  • 【Durable】The deck blades with 7-point star center holes are made of heavy-duty metal. Please make sure the spindles on your mower are 7-point star blade mounts..
  • 【Package Includes】Two pack lawn tractor blades with 21-3/8" in length, 2-3/4" in width, and 1/6" in thickness..
Check Stock

NOVINO Grease Zerk Fitting Tools Fits 1/4"-28 SAE,1/8"-NPT, M10x1 M8x1 and Grease Zerk Fittings with hex Size 3/8" 5/16" 7/16",Multi-Tool for Remove Install Rethread Damaged Broken Zerk Grease Fitting

  • 2 set Heavy-Duty alloy steel galvanize grease zerk tool. One fits for 1/8"-NPT PTF grease zerk fitting, M10x1 and grease zerk fittings with hex size 3/8" (9.5mm) & 7/16" (11mm). One fits for Fits 1/4"-28 SAE, M8x1 and Zerk fittings with hex size 5/16" (7.85mm) & 3/8" (9.5mm).
  • A must have grease fitting multi-tool: 4 tools in one grease zerk kit---install,remove,re-tap holes( repair 1/8"& 1/4"-28 tap thread) and maintain zerk grease fittings .Make job more easier and save time..
  • Function 1---Remover and Installer. The silver sockets are grease fitting removal & install tool,used to removal damaged broken grease fittings OR install straight and angle grease zerk fittings( 30, 45, 65, 90 degree angles ).
  • Function 2---Thread Cleaner and Restorer.The black taps on the cross ends are grease fitting cleaning tool ,designed to clean out the threads of a clogged fitting and retreading repair correct fitting thread..
  • Wide use:Our grease zerk fitting tool kit is designed to meet requirements on tractor/loader/lawn mower/excavator/rotary ....
Check Stock

Finish Line Gear Floss Microfiber Cleaning Rope (Pack of 20 microfiber ropes)

  • The ultimate detailing tool! Perfect for cleaning your rear cassette, front chain rings, derailleur pulley wheels, hubs and spindles, brake arms, bottom bracket / crank interface, and more..
  • Gear Floss' Microfibers work by attracting, removing and holding grime. Other materials simply move it around. Microfiber captures dirt, grease and particles inside its star-shaped grooves and remove grime better than any other material..
  • Microfiber rope is highly tear-resistant and it is washable..
  • Easy to Use! Position floss between gears Slide back and forth Slide into other hard-to-clean areas like derailleur pulley wheels, hubs and spindles, brake arms, bottom brackets /crank interface, etc..
Check Stock

Southwest Wheel 7,000 lbs Trailer Axle Electric Brake Kit

  • Pair of 12" x 2" 8-6.5" bolt circle TruRyde hub and drums 25580 inner bearing 14125A outer bearing.
  • Pair of 12" x 2" TruRyde electric backing plates.
  • Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory..
  • Comes with TruRyde bearings, 2.25" ID seals, 2.125" ID seals, lug nuts, solid grease caps, ez lube grease caps, cotter pins, spindle washers, tang....
  • Built for 42 spindles with a 5 hole brake flange.
Check Stock

MTD 712-0417A Hex Flange Nut 5/8-18- 3 Pack

  • Known as Hex Flange Nuts, Flange Lock Nuts, Spindle Nuts, Blade Lock Nuts, this nuts are used to secure a blade to the spindle.
  • Work with MTD, Craftsman, Troy Bilt lawn mowers & tractors. Had been tested and confirmed to work with LT1040 LT1042 LT1046 LTX1040 mower deck spindles.
  • Replace the part# 712-0417, 712-0417A, 912-0417, 912-0417A, 753-05549, 112-0330.
Check Stock

Grasshopper Mower PTO Shaft & Clutch Assembly Pillow Block Bearing for Grasshopper FrontMount Mowers, Reduces Resistance and Friction, Enhances Motion, Genuine Replacement Part, OEM 122044

  • COMPATIBILITY INFO: PTO Shaft & Clutch Assembly Pillow Block Bearing for Grasshopper FrontMount Mowers For all Grasshopper FrontMount mowers 1985- Grease every 100 hours. Do not over grease. Excessive lubricant increases load on bearings and causes overheating. Vacuum & Drive Assembly for FrontMount Decks (852/861, 342/344/348/352/361/372, 944/948/952/961 (25 MM), 972. Aux Wand Vac (QD Mount)..
  • ZERO-TURN MOWERS: fits most Grasshopper Zero-Turn Mowers, FrontMount and MidMount. All Grasshopper mowers are driven exclusively by fully hydraulic, pump-and-wheel-motor drive systems for exceptional performance, durability and responsiveness. These drives are "no gears" systems, so they provide more power to the cutting deck or implement. They are also better for cooling for longer component life and provide more responsive steering control and traction through turns..
  • GRASSHOPPER INNOVATION: At Grasshopper, one innovation leads to another. As a pioneer in manufacturing zero-radius ride-on mowing equipment, The Grasshopper Company immediately set a pace of rapid advancement and innovation that continues today. When company engineers designed our first Grasshopper mower in 1969, they envisioned a low maintenance, highly maneuverable mower tough enough to serve t....
Check Stock

Spindle Assembly for Craftsman/Hus/Ariens/Poulan, Mandrel Assembly for 42" 46" 48" 54" Mower Deck, Come with All Mounting Hardware Including Threaded Bolt and Grease Fitting, Replace 187292 192870

  • 【Compatibility】Qualitied spindle assembly directly fit for many mower tractor，including craftsman, hus, ariens, poulan，ect. Poulan pro, roper, sears. Fits 42", 46", 48", 54" decks. [NOTE: It will not fit any Z Turn Mowers.].
  • 【Specific Model】Great replacement Spindle for Hus 187281, 532192870, 587819701, 532187292, 532187281, 539112057, for Arians 21546299, 21546238, for AYP 192870,187292,532192870..
  • 【Easy to Install】Come with 4 threaded mounting bolts, pulley nut, blade bolt and washer which will make the replacement to be easier and more convenient..
  • 【High Performance】Made of sturdy material, well inspected and tested by manufacturer. The spindle is greaseable, it has grease fittings at the top for maintenance..
  • 【Great Design】The mower deck spindle is pre-greased, equipped with a grease fitting on the side of the spindle for maintenance, recommended to grease prior to use..
Check Stock