Martin 3020 2 Taper Bushing, Sintered Steel, Inch, 2\ Bore, 4.25\ OD, 2\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2517 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5\ Bore, 3.375\ OD, 1.75\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockEasyinsmile X-Pro Gold Taper NITI Endo Rotary Files 6pcs Endodontic Controlled Memory Files 6Pcs
- Shaping files made by EASYINSMILE-R wire.
- X-TAPER GOLD files are compatible with all major rotary motors in the market. Explore the canal by using #10 stainless steel hand files.
- Use SX to open canal, setup a straight path.
- Irrigate, then expand a glide path by PATH FILE #12.5, or #15, or#20.
- Use S1 to prepare to 3mm or 4mm SHORTER than the working length.(even shorter).
- According to the preparation status, to choose use F1- - F3 to prepare to working length Everytime you change file, please ensure irrigate the root canal copiously and frequently with a lubricants, such as EDTA. (very important!!).
Check StockNicholson 22040HNN 5 Piece Hand File Set with Ergonomic Handles, American Pattern, 6\ Length, (2)-8\ length, (2)-10\ length
- Set of 5 files in a variety of shapes for a range of home or shop uses.
- American pattern files for non-precision material removal.
- Attached rubber-coated ergonomic handles for grip.
- Set of 5 files fit easily and securely into rugged, compact pouch.
- 8-Inch /200mm mill smooth file 6-Inch /150mm slim taper file.
Check StockClippers by WAHL Cordless Super Taper Clipper
- Powerful, durable and reliable this clipper can be used on or off the cord and features lithium battery technology delivering consistent cutting power throughout the 90 minute run time..
- The thumb adjustable taper lever allows for a greater variation in cutting lengths.
- Convenient thumb adjustable lever allowing taper and texture without changing the blades.
- Provides consistent cutting power for bulk removal.
- Box Including: Hair clipper, x4 attachment combs, Small flat top comb, Blade guard, Blade oil, Cleansing brush, Charger EU-Plug + EU to US Plug converter, Instruction booklet.
Check StockSuperStroke NHL Golf Putter Grip, Boston Bruins (Mid Slim 2.0) | Officially Licensed Through Team Golf | Cross-Traction Surface Texture and Oversized Profile | Even Grip Pressure
- No Taper Technology: Patented No Taper Technology creates even grip pressure for a more consistent stroke. Parallel design has uniform lower hand profile to minimize grip pressure.
- Traction Control: Advanced surface texture design engineered to provide a non-slip grip while offering superior playability in all weather conditions..
- The specialized Cross-Traction pattern on the tacky polyurethane outer layer offers an amazing comfortable feel leading to greater overall confidence..
- Oversized Profile: Lightweight EVA foam allows for a lighter weight grip in a larger footprint. Mid Slim 2.0 - DIAMETER 1.20″ / WEIGHT 53g / CORE 0.580″R.
- Critical for maintaining proper balance of the overall putter to ensure greater consistency in squaring the putter face at time of impact during the stroke.
Check Stock
17Pcs File Tool Set with Carry Case,Premium Grade T12 Drop Forged Alloy Steel, Precision Flat/Triangle/Half-round/Round Large File and 12pcs Needle Files/1 brush
- Premium Forged Alloy Steel: 4 pcs precision large file are made by T12 Drop Forged Alloy Steel, 12 pcs needle files are made by GCR15 bearing steel, high temperature quenching on the surface of the files lead to higher strength and better abrasion resistance..
- Value Package: 17 PCS File, There are 4 pcs of 8" engineer files of flat, triangle, half-round, round shape ,12 pcs of 4.2" precise needle files of square, round taper, equaling, ring, warding, triangular shape,1 multi-functional brush, for brushing bits and filing materials such as metal, wood, plastic, glass, ceramics and leather..
- Comfortable and Tight Handles - The soft rubber handles will provide you with the best hold on each and every file, allowing you to work longer without getting tired..
- Portable Tools Bag - This hand files kit is coming with a tools bag, which will help to organize and protect the mini files and the large files well. The strap on the top of the tools bag makes it more convenient and comfortable for you to carrying it everywhere..
- Buy with confidence - handy tool bag with a wide variety of files will allow you easily finish and enjoy woodworking..
Check StockVic Firth American Classic Value Pack Drum Stick (P5BB3-5BB1)
- Value pack (4 pairs of sticks) of the popular Vic Firth American Classic 5B drum sticks in Black made in the USA from American Hickory. All pairs are matched through computer analysis for optimum balance of weight and pitch.
- More substantial (greater diameter) than a 5A, but not overpowering. The Vic Firth 5B has a medium taper for a great balance..
- The 5B sticks have a lacquer surface and medium taper.
- Dimensions: Length = 16" | 40.64cm Diameter = .595" | 1.51cm.
Check Stock
