SOLOFISH SL-1039CL 500 Lumens Tactical Flashlight with Green Circle Dot Laser Sight for Pistol, Rechargeable Green Circle Beams for Guns/ Shotgun W/ a Rail

  • ✅【21MM Width Rail System Required】Make sure your pistol has a 21MM rail system, or the pistol light with green laser sight combo will not fit..
  • ✅【Green circle Dot Laser Design】The power output of the green beam is less than 5mW, class: IIIA, features 520nm. The green circle beam is adjustable to keep zero with the included Allen tools. The green circle dot laser sight helps you get fast aiming speed..
  • ✅【Multiple Tactical Modes】 The pistol light offers Steady/Strobe Gun light mode.
  • Green Circle Beams only mode, Steady/Strobe Flashlight+ green beams mode..
  • ✅【Rechargeable Built-in Battery】The handgun light with green circle beam is powered by a built-in battery, a full charge takes 1.5 hours by USB cable. Power indicator light:Red light/Charging or low battery.
  • ✅【Durable & Shockproof Aluminum Alloy Design】The green circle beam and white led light combo is made of durable Aluminum alloy, which is light weight and ultra compact. Dimension: L1.45”*W1.09”*H1.45”.
Check Stock

TuFok Sight Mount Plate - G17 19 22 23 26 27 34 Rail for Install Pistol Red Dot Sight fits Bushnell Trophy TRS-25 Red Dot Sight,OTW Red Dot Sight TAN

  • TuFok Sight Mount Plate - G17 19 22 23 26 27 34 Rail for Install Pistol Red Dot Sight fits Bushnell Trophy TRS-25 Red Dot Sight,OTW Red Dot Sight....
  • Presium machined from high quality 6061 aluminium alloy with durable black matte finish designed..
  • Fits RMR, RMS, Doctor,OTW,Bushnell Trophy TRS-25 Red Dot Sight,CVLIFE 1X22X33 Red Green Dot Gun Sight,Sig Sauer SOR52001..
  • Length: 1.8 inches(45mm),Light Weight: 0.7 oz(20g).
Check Stock

Ade Advanced Optics rd3-012-G-1 6MOA Green Dot Micro Mini Reflex Sight for Handgun

  • This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn....
  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34. It does NOT fit standard glock, or glock with a aftermarket slide.If you have....
  • This ADE red dot is NOT compatible with optic plate/slide/cut for trijcon rmr/Shield/Holosun 407 type footprint. It only compatible with footprint....
  • GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was....
  • For Non-Optics Handgun,user need to purchase after market Optic Plate made specifically for that pistol to replace the rear sight.This Green Dot comes....
Check Stock

Ade Advanced Optics RD3-006A Green Dot Micro Mini Reflex Sight for Handgun

  • Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail..
  • This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for Doctor/Venom type red dot..
  • However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol’s pre-cut is very short...
  • Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Powered by a lithium CR2032 battery.
  • ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..
Check Stock

Urstac Blue Laser Sight for Pistol,Tactical Laser Gun Sight Used for 21MM Standard Picatinny Rail,USB Rechargeable Blue Dot Laser Sight for Handguns,Rifles,Outdoor Hunting Defense Training

  • 【Bright Blue Pistol Laser Sight, Safe & Adjustable】- The pistol blue laser sight is highly visible even in bright light (500m/day.
  • 1000m/night) and safe with pistol laser sight power.
  • the pistol laser sight adjustment only took a minute..
  • 【Fast USB Rechargeable Gun Laser】- Just stick the gun laser supplied USB charging cable to the gun laser charging port without any removal operation and replacement battery, easy, energy-saving and safe. The gun laser instruction is very clear, when gun laser indicated light comes green means charging in full..
  • 【Ultra Low Profile and Compact Gun laser】- The airsoft gun lasers is ultra compact、low profile with high strength black nylon material. Stand the recoils very well, anti-vibration,fog-proof. Install the gun laser on the gun, the grip is also very comfortable. It doesn’t add too much weight, so you can aim at the target more accurately..
  • 【Gun Laser Fits onto Most Guns】- The gun laser sight for handguns is friendly for left and right-handed users with....
Check Stock

Vector Optics Sphinx Mini Red Dot Scope Sight Slide Mount Base for Pistol 1911 Color Black

  • Designed for Smith & Wesson, M&P pistol to fit Vector Optics Sphinx Red Dot Sight or Green Dot Sight, Vortex Venom, Burris FastFire and similar style....
  • Lightweight, Shockproof, Weatherproof. Designed for real fire caliber..
  • Full metal, heavy duty. Made of high quality 6061 T6 aluminum alloy in durable black matte finish..
  • Remove your rear sight before installing the mount base. Including 2 screws, 1 steel bar and 1 plate..
Check Stock

Infilight Green Laser Sight Compact Green Laser Dot Sight Scope Adjustable Low Profile Picatinny Rail 0.07 Inches Mount Laser Sight with Rechargeable Battery Pistols & Handguns L101G Green Laser

  • Brand New Laser Compact Laser Sight: Compact Green dot sights, Laser beam can be easily identified and the PICATINNY interface provides STANDARD....
  • Humanize Setting:Ambidextrous on/off switches for either right or left handed individuals. Elevation and windage adjustment screws allow you to....
  • Rechargeable & Eco-friendly: Built in rechargeable lithium-ion battery,fits for any standard Micro USB Cable. The green dot sight sight can be used....
  • Powerful Design: Green Laser Sight is extremely low profile, but powerful, designed to mounted on any firearm with a picatinny or weaver rail....
  • High Quality: Made of Superior Nylon material, super sturdy and lightweight. Mounts securely onto standard pistol rail, high strength to anti-shock,....
Check Stock

Ade Advanced Optics RD3-006 Green Dot Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate

  • Comes with a ADE RD3-006 Green dot, a Picatinny plate and a pistol optic plate to REPLACe the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo).
  • We are listening! Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree..
  • The pistol plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C plate on amazon under different listing..
  • This GREEN dot comes with a picatinny mounting plate pre-assembled (might be packaged separately in the retail package, depends on the ADE model). Please use the allen wrench provided to take out the 2 hex screws(M3x6mm) on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates.
  • 4 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01"H x 1.9"L x 1.1W.
Check Stock

SAMTEC Mounting Plate for G17 19 22 23 26 27 34 Mount Pistol Sight Mount Base Fits Vortex Venom, Vortex Viper, Burris Sightmark Mini Reflex Sight - 1.81X1in

  • Easy to install -- Replace the rear sight slot with mini red dot base plate (Caution: NOT fits for RMR, RMS, DOCTOR.)Size: 1.81X1in.
  • Pistol mount plate fits G17 19 22 23 26 27 31 34 35..
  • Suitable Mini Red Dot Sight -- Fits Vortex Viper/Venom micro red dot sight, designed for rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight..
  • Special Pistol Mount -- Fits Burris Fastfire micro red dot sight (Notes: the screws included are not long enough for some Burris red dot, pls use the screws in the red dot.).
  • Highest Quality Material -- Full metal, heavy duty, made of 6061 T6 aluminum alloy in durable black matte finish..
Check Stock

Ade Advanced Optics Huracan Green Dot Micro Mini Reflex Sight for Handgun - FDE/TAN Body Color

  • ... FDE color proprietary, however, it will look great even the color might be slightly darker or lighter..
  • This ADE RD3-006B GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates(SOLD SEPARATELY) that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP, Taurus TORO using Pistol manufacturer provided optic mounting plate(SOLD SEPARATELY)..
  • 4 MOA. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
  • It is fits directly to "Optics Ready" pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided #1 mount, however the front switch of the sight needs to trim down 2mm..
Check Stock

Vector Optics Sphinx Mini Red Dot Scope Sight Mount Base for Pistol Glock M1911 SIG Sauer P226 Baretta 92 Springfield XD Smith & Wesson M&P HK USP Black Glock

  • Designed for GLOCK pistol to fit Vector Optics Sphinx Red Dot Sight or Green Dot Sight, Vortex Venom, Burris FastFire and similar style mini Red dot....
  • Lightweight, Shockproof, Weatherproof. Designed for real fire caliber..
  • Full metal, heavy duty. Made of high quality 6061 T6 aluminum alloy in durable black matte finish..
  • Remove your rear sight before installing the mount base. Including 2 screws, 1 steel bar and 1 plate..
Check Stock

Kingslayer

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

Kingslayer [Blu-ray]

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock