Categories

Best Grinder Bushing Kit

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

Bushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit

  • Kit includes replacement bushing and application specific installation tools..
  • Text and video instructions along with tech support make installation very easy..
  • Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Check Stock

Titan Complete Quick Hitch Bushing Kit for 3 Point Hitch Tractors Top Link and Lower Lift Pins

  • QUICK HITCH BUSHING KIT: This 3Pt bushing kit allows you to adapt your implement to fit quick hitches. Simply slide the bushings onto your lower lift pins and top link pin to reduce and remove spacing for a better, more secure fit..
  • MADE FROM COATED STEEL: Each bushing will be made from zinc coated steel. This coating prevents the steel from rust and corrosion, so you do not have to worry about the bushings breaking down over time..
  • SIX TOP LINK PIN ADAPTERS: This Quick Hitch Bushing Kit will include 6 total top link adapters. These adapters range in length and thickness to allow you to convert category 0, category 1, and category 2 top link pins to better fit your quick hitch..
  • EASY INSTALLATION: With this bushing kit, installation is a quick and easy. Slide the top link bushing over your top link pin and use the shoulder bushings on your lower lift pins. Secure the shoulder bushings using the included roll pins by hammering them into position..
Check Stock

FreeTec 52-in-1 Custom Bushing Driver Set, Bearing and Seal Driver Transmission Bushing Removal Puller Bearing Press Tool Kit

  • Package contains: you will receive 6 pieces reducing bushing adapters in 3 sizes thick bench grinding wheels, enough for your daily use and replacement.
  • 3 Sizes included: the length of 6 pieces reducing bushing adapters is the same size, which is suitable for thick bench grinding wheels.
  • 2 Pieces ID 1/2 inch x OD 5/8 inch, 2 pieces ID 5/8 inch x OD 3/4 inch and 2 pieces ID 3/4 inches x OD 1 inch, 3 sizes would be provided for you.
  • Quality material: the reducing bushing adapters are made of quality stainless steel, rust-prevention and hard, could apply for a long time.
  • Nice performance: the reducing bushing adapters are easy and simple to be applied, which will not be deformed or broken easily.
  • For effective operation: these adapters of various sizes can be operated with a bench grinder for variable operation, but also improve your working efficiency.
Check Stock

LINE10 Tools 6-inch Wire Brush Wheel for Bench Grinder, Set of 2, Brass-Coated Steel for Cleaning Rust

  • Kit comes with two 6 inch diameter wire brush wheels which can be mounted on any 6 inch bench grinder with 5/8 or 1/2 inch arbor.
  • 1/2-inch bushing is included for 1/2-inch arbor grinders, 5/8-inch arbor fits on most 6 inch bench grinders.
  • Ideal for Rust removal, Paint Stripping, Deburring sharp edges, Edge Blending.
  • Quality Long lasting Brass-coated hardened steel bristle wire reduces sparking and wire breakage.
  • Ideal stationary solution for any shop, check the power tool safety instructions before use 3750 RPM Max.
Check Stock

PURUI 8 Buffing Polishing Wheel-Coarse 42PLY Medium 60PLY Fine 40PLY with 5/8 Arbor Hole -Brown,Blue,Red Rouge Polishing Compounds for Bench Grinder 6PC

  • 8 Inch buffing wheels kit for bench grinder. Used for polishing and buffing metals to get a mirror surface. Especially great for polishing soft metals and jewelry..
  • As an 8 Inch bench grinder polishing kit, this kit can be installed on a bench grinder which with 5/8 Inch arbor shaft directly or used with a tapered bench grinder spindle adapter together..
  • Very easy to install and use. The First way: fit the bench grinder polishing wheels on the 5/8 Inch arbor shaft and tighten the nut. The Second way: screw into the bench grinder buffing wheels on the tapered bench grinder spindle adapter..
  • Made of 100% fine cotton cloth and high-quality abrasives. Complete bench grinder polishing kit, with coarse to fine buffing wheels and buffing compounds, make your polishing work efficiently..
  • This bench grinder polishing kit Includes: 1PC 8 Inch yellow muslin buffing wheels.
  • 1PC 100g brown tripoli polishing compound bar.
  • 1PC 100g all-purpose blue polishing compound bar.
  • 1PC 100g jewelers rouge polishing compound bar. 1PC PURUI POLISHING Metal Polishing Guide..
Check Stock

Danco, Inc. 89487 Lift and Turn Bath Trim Kit, 1-Pack, Oil Rubbed Bronze

  • EASY BATHROOM FIXTURE UPGRADE: Oil rubbed bronze finish trim kit provides a stylish elegant look to your tub shower with easy DIY installation.
  • UNIVERSAL FIT: Designed to fit bath tub drain brands. Designed to fit 1-7/8 inch drains WITH bushing. Threaded adapter bushing fits 1-1/2 inch and 1-3/8 inch drain shoe sizes..
  • KIT INCLUDES: Stopper cartridge, overflow plate, a bath shoe, a plastic adapter bushing. Comes with adapter for use with 1- or 2-hole overflow plate..
  • DURABLE LIFT AND TURN STYLE: Durable brass construction provides strength and durability for lift and turn style drain kit.
Check Stock

lesolar Trailing Arm Bushing Tool Kit Suspension Control Arm Bushing Tool Kits Rear Bushing Removal Tool Kit with Storage Carrying Case Suitable for The Ford Focus Bushing Removal MK1 1998

  • 【Application】Control arm bushing tool kit has a wide range of application and strong practicality. It is suitable for Ford Focus MK1 & MKII 1998-2007, Ford Cuga 2008, Ford C-Max 2007, Mazda 3 sedan, hatchback 2003-2008, Mazda 5 CR, CW, MPV 2005, V50 2004-2012, S40 MK sedan 2003-2012..
  • 【Performance】Rear trailing arm bushing tool has excellent performance, which can protect your car from scratches, and it is used to silently press in and pull out the rear of the shaft to improve safety and reliability..
  • 【Easy to Use and Storage】Bushing removal tool kit is easy to use and install without the need to remove the rear axle, saving a lot of time. What's more, Heavy-duty plastic blow-molded carrying case is easy transportation, safe storage, and quick organization..
  • 【Material】Rear bushing tool kit is made of selected carbon steel. The greater the hardness, the higher the strength, and the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life..
  • 【After-sales Service】The trailing arm bushing kit has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we will solve any difficulties for you ....
Check Stock

9Pcs Angle Grinder Carving Disc Kit Including 3 Wood Shaping Grinding Disc, Speedcutter, Wood Carving Chain Disc and 4 Sanding Wheels for 4' or 4 1/2' Angle Grinder for Woodworking Cutting and Shaping

  • 【Upgraded Wood Shaping Grinding Disc】3 Different grinding plates(Flat, Inclined, Curved), and 3 pieces of silver bushing(7/8" to 5/8"). Designed to be used in all standard 4" or 4 1/2" angle grinders with 5/8" as well as M10 arbor..
  • 【Speedcutter & Carving Chain Disc】Speedcutter is made of hard alloy, suitable for polishing, grinding and cutting non-metal materials & all kinds of wood. Wood carving chain disc is made of stainless steel, solid and durable for use, 13 teeth fine cutting chain disc, circular baw blades provides a smooth finished surface, fits for 4-1/2" angle grinders..
  • 【Zirconium Corundum Flap Disc Wheels】Constructed of premium blue zirconium corundum for excellent strength, durability, and extended service life. 60 grit grinding wheels are good & effective alternative for smoothing, sanding, blending, polishing, finishing flat surfaces, deburring contours..
  • 【Application】With rapid cutting and grinding speed, the grinder carving disc kit is great for many materials, suitable for any wood, cutting everything from hardwood, plastic and other soft materials, without worrying about hard places such as wood bumps. Ideal for grinding, carving, and removing small tree stumps. Good wears resistance, can serve you for a long time..
Check Stock

3 Kind Of 3/4 Thick Reducing Bushing Adapters Id 1/2 Od 5/8 | Id 5/8 Od 3/4 | Id 3/4 Od 1 For Reduced Diameter Arbor Hole Of Bench Grinding Wheel Or Sanding Wheel 3 PCS

  • ☆☆Three reducing bushing adapters for 3/4-inch wide bench grinding wheels with 3/4'',5/8'',1'' Arbor hole diameter..
  • ☆☆ Multi-sizes adapters make using of bench grinder variable and saving cost..
  • ☆☆ Material:316 stainless steel is rust-prevention and durable..
  • ☆☆ Dimension:#1,ID 1/2''x OD 5/8'' x H3/4''.
Check Stock

SHIGA Skateboard Longboard Replacement Bushings Conical Cushions - 92A Resiliency

  • Keep your skateboard better and more comfortable.
  • Are you still worried about the squeaking of skateboards? Our skateboard bushing has rebound, which brings you a quieter and smoother experience..
  • The bushing kit consists of a tapered top bushing and a cylindrical bottom bushing..
Check Stock

Dorman 14104 Shift Cable Bushing Kit Compatible with Select Models (OE FIX)

  • Convenient solution - this shift cable bushing kit directly replaces a broken bushing and eliminates the need to replace the entire cable assembly.
  • Save time and money - save the expense and significant installation time of replacing an entire cable assembly.
  • Ensure fit - this bushing kit is vehicle-specific and precision-engineered for specified General Motors and Chrysler models and years.
  • Trustworthy quality - designed in the United States and backed by more than a century of automotive aftermarket excellence.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

ALATIN 5/8 Inch Wood Carving Chain Disc 4 Inch 22 Teeth Saw Blade Grinder Wood Carving Disc for 4 Inch/ 4-1/2 Inch Angle Grinder Grinding Shaping Attachment Circular Chainsaw Wheel

  • [Upgraded Design] After checking all the complaints of grinding disc set sold on Amazon, our engineer upgraded the diameter of 12 teeth disc from 2 1/2" to 3 1/2" to be compatible with 4" and 4 1/2" angle grinder.  Besides, the grooves of the wood carving disc has been enlarged to fit widely used 1.61" black flange nut. So all the parts work right out of the box..
  • [Fit 4" or 4 1/2" angle grinders with 5/8" Arbor] The angle grinder attachments set includes 1 piece of 22-tooth chain saw disc (4" dia × 5/8" bore), 1 piece of replacement chain, 1 piece of 12 teeth wood cutting disc (3.55" dia × 5/8" bore), 1 piece of wood grinding wheel w/ silver bushing(3.31" dia ×5/8" bore). Designed to be used in all standard 4" or 4 1/2" angle grinders with 5/8" as well as M10 arbor, such as Makita, Bosch, Dewalt, Black & Decker, Milwaukee, Hitachhi & more..
  • [Cope with Different Occasions] The wear-resistant chain disc consists of stainless steel plate and 22-teeth chainsaw of hard alloy steel. If your chain plate gets dull, you can quickly replace the chain with the extra circlet. Hundreds of aggressive teeth of the wood grinder wheel can remove paint residue and rotted wood to smooth the surface of old furnitures. The carbon steel cutting wheel can be used to pr....
Check Stock