Categories

Best Groove Turning Bars

Blackstone Outdoor Gas Griddle Cookbook for Beginners

  • 【PREMIUM MATERIAL】- Made of high-quality stainless steel material, high-temperature resistance, durable and sturdy to use. Our flat top griddle is....
  • Width: 16.9”. This stainless steel griddle is great for sitting on your charcoal or gas grill to cook all kinds....
  • 【GREASE GROOVE WITH HOLE】- Reasonable-size grease groove at the front can accommodate food residues and collect oil while cooking, makes cleanup a....
  • 【CONSIDERATE DETAIL】- Heightened Sidewalls, ideal for dishes flipping and turning, keep food on griddle. Convenient handles mounted on two sides,....
  • 【WIDE APPLICAITON】- This griddle for grill can be used on electric griddles, gas stoves, and charcoals. Fits perfectly over Triple burner stand....
Check Stock

3PCS S08K/S10K/S12M- SDUCR07 95 Degree Internal Turning Boring Bar with 10pcs DCMT21.51 DCMT070204 Carbide Turning Inserts for Machining Steel Parts and Stainless Steel Three Holder Set With Inserts

  • ☞Material : DCMT2(1.5)1 carbide Inserts with CVD coating ,55 degree diamond turning inserts ，used for machining stainless steel and steel parts.
  • ☞About the Internal Boring bars: 40Cr common steel with forging process , strong and durable ,95 degree right hand internal turning holder. Screw compression,easy to install and remove.
  • ☞Advantage: Offer long life and faster cutting speed, low friction coefficient, good wear resistance Designed for Steel, cast iron and non-ferrous materials.
  • ☞Application: The Minimum processing aperture is 3-5mm of the boring bar head diameter. Used for turning and finishing on a wide range of materials..
  • ☞Package includes: 3pcs Turning Boring Bars (S08K-SDUCR07 + S10K-SDUCR07 +S12M-SDUCR07 ) + 10pcs DCMT070204 Gold Carbide inserts + 3PCS T8 Wrenches.
Check Stock

The Bar Method Super Sculpting II Workout

  • WE OFFER MORE THAN OTHER BARRE WORKOUT EQUIPMENT, FOR LESS! FEELS PERFECT for ballerina to hold at 1.5 dia, 4 feet long, smooth sanded premium beech wood with no splinters. NO WOBBLE NO SLIDE – high tensile steel brackets and strong locking screws. Our dance bars includes TURNING BOARD worth $15..
  • FEELS PERFECT TO HOLD Perfect your craft on a bar that DOESN’T BEND and has NO SPLINTERS, thanks to the premium beech wood finish and SMOOTH SANDED surface. At 1.5 inch diameter and 4 feet length, this ballet equipment feels just right to clasp into your palm. Also known as dance barre for home, ballerina bar, exercise ballet bar, Portable ballet barre for home, balle barre equipment for home, balance bar workout, ballet exercise equipment, barre ballet workout, ballet barre portable for home.
  • NO, OUR BAR DOESN’T WOBBLE OR SLIDE! Wobbling is a common problem with ballet bars. The ballet bar wall mount is designed to with high tensile powder coated steel brackets and strong locking screws. Your ballet bar doesn’t wobble or slide while in use..
  • INCLUDES A TURNING BOARD WORTH $15 Perfect your pirouette and master your spinnin....
Check Stock

Carbide Inserts Dowel Maker Dowel Plate Wood Raw Materials Rods Wood Sticks Maker Dowel Round Bar Auxiliary Tool Metric 3 Holes 10mm 12mm 14mm

  • ROUNDING BAR TURINING TOOL: This is a turning auxiliary tools for turning square sticks to making round sticks applied to electric drills..
  • PACKAGE INCLUDES: Rounding stick turning jig*1, Blade*3, Wrench*1..
  • SIZE: The size is 3.5*2.5*13cm, and the three blades on the jig can be adjusted and fixed by a wrench..
  • HOW TO USE: Sharpen both ends of the square stick embryo, then fix the Rounding Bar Turning Tools on the work surface, and finally rotate the square stick embryo with the electric drill and pass through the hole on the jig..
  • APPLICATION: Turning aids jig are commonly used in woodworking activities to make wooden round bars with diameters of 10mm, 12mm, and 14mm..
Check Stock

HAUTMEC End Cutting Pilers 7 Inch Nail Puller Pliers End Cutting Nippers for cutting or pulling nails and wires HT0158-CP

  • 5-Piece household pliers set includes 6-in diagonal pliers, 6-in slip-joint pliers, 6-in long nose pliers, 7-in linesman pliers and 8-in groove joint pliers..
  • Bi-material anti-slip handles with ergonomically designed for more comfortable and a better grip on the work surface..
  • High-quality drop-forged steel provides a durable cutting edge. Precision machined jaws for better grip..
  • Polished surface for excellent work performance and anti-corrosion. Slip-resistant tongue and groove design used for grasping and turning..
  • Versatile, perfect for plumbing, automotive and general applications..
Check Stock

Jewelry Bar Mold, Reversible Jewelry Ingot Mold Oil Groove Mold Manufacturing Tools Melt Casting Metal Tool, Oil Groove Metal Melting Tools for Ingot Manufacturing Sheet Metal Ingot

  • Mainly Uses: Perfect for making ingots from scrap gold and silver, metal resource recycling and reuse, suitable for jewelry stores, hardware stores or other metal industries.
  • Groove Size: There are four types of rod diameters that the metal melting tool can be made - 8mm, 6mm, 5mm, 4mm. The depth of the mold is 61mm, so the height of the bar is about 60mm.
  • Modeling type: The jewelry oil groove is reversible, so it can be used to make bars and sheets. It can help you make metal bars or sheets of the same size.
  • Ease of use: wooden handle with oval shape for easy holding. The clamp is included in the scope of delivery. It can help you move the molten metal and improve the jewelry making work efficiency.
  • Compact size: it is detachable and easier for you to check and clean. Size: Approx. 20 * 8 * 8cm / 7.87 * 3.15 * 3.15in, it doesn't take up too much space, weight: 1375g portable to carry.
Check Stock

Carbide Milling Insert APMT1135 H2 PDER CNC Milling Machine Indexable Milling Insert, Multilayer Coated Lathe Tool Insert,Suitable for Processing Steel and Stainless Steel.10 Pieces/Box

  • It Is Processed By Imported Technology And Has The Advantages Of High Hardness, Strong Wear Resistance, High Smoothness, Not Easy To Stick To The Knife, And Smooth Chip Removal..
  • Different R Angles Can Meet Your Needs For Fine Turning Or Rough Turning, Reduce Cutting Resistance, And Achieve Sharp Cutting..
  • The Turning Is Light And Fast, And The Advanced Coating Process Is Sprayed By The 1001-Degree Stress Accumulation Method, The Coating Is Thicker, And The Cutting Edge Is Passivated, Strong And Durable..
  • The Unique Groove Design Can Make Chip Removal Faster And Smoother, So As To Ensure That The Excrement Will Not Scratch The Surface Of The Product!.
  • The Blade Is Both Sharp And Thick, So That It Can Realize The Ideal Processing That Is Fast And Not Easy To Stick To The Knife, High Smoothness And Not Easy To Break..
Check Stock

Canomo 50 Pairs Butterfly Clutch Tie Tacks Pin Backs with 10mm Blank Pins(Silver)

  • Material: made of nickel plated brass, durable and sturdy.
  • Easy to install and remove for its flexible spring fastener slices.
  • The 10mm blank pins stamping technology processing, there is a small groove on the back, consistent with the picture.
  • Good supplies for making DIY crafts and can be applied to tie tacks, badge insignia, citation bars, service bars and jewelry making.
Check Stock

Indexable Carbide Grooving Inserts GTN-3 (SP300) Coated CNC Lathe Carbide Cutters Inserts for Lathe Grooving Cut Off Tool is Suitable for Processing Stainless Steel. 10 Pieces/Box

  • It Is Processed By Imported Technology And Has The Advantages Of High Hardness, Strong Wear Resistance, High Smoothness, Not Easy To Stick To The Knife, And Smooth Chip Removal..
  • Different R Angles Can Meet Your Needs For Fine Turning Or Rough Turning, Reduce Cutting Resistance, And Achieve Sharp Cutting..
  • The Turning Is Light And Fast, And The Advanced Coating Process Is Sprayed By The 1000-Degree Stress Accumulation Method, The Coating Is Thicker, And The Cutting Edge Is Passivated, Strong And Durable..
  • The Unique Groove Design Can Make Chip Removal Faster And Smoother, So As To Ensure That The Excrement Will Not Scratch The Surface Of The Product!.
  • The Blade Is Both Sharp And Thick, So That It Can Realize The Ideal Processing That Is Fast And Not Easy To Stick To The Knife, High Smoothness And Not Easy To Break..
Check Stock

Sandvik Coromant, R390-17 04 08M-PM 4340, CoroMill 390 Insert for milling, Carbide, Rectangle, Right Hand, 4340 Grade, CVD TiCN + Al2O3 + TiN (Pack of 10)

  • It Is Processed By Imported Technology And Has The Advantages Of High Hardness, Strong Wear Resistance, High Smoothness, Not Easy To Stick To The Knife, And Smooth Chip Removal..
  • Different R Angles Can Meet Your Needs For Fine Turning Or Rough Turning, Reduce Cutting Resistance, And Achieve Sharp Cutting..
  • The Turning Is Light And Fast, And The Advanced Coating Process Is Sprayed By The 1000-Degree Stress Accumulation Method, The Coating Is Thicker, And The Cutting Edge Is Passivated, Strong And Durable..
  • The Unique Groove Design Can Make Chip Removal Faster And Smoother, So As To Ensure That The Excrement Will Not Scratch The Surface Of The Product!.
  • The Blade Is Both Sharp And Thick, So That It Can Realize The Ideal Processing That Is Fast And Not Easy To Stick To The Knife, High Smoothness And Not Easy To Break..
Check Stock

VeYocilk Lathe Threading Carbide Inserts:10 Pcs 11IR A60 1/4 Carbide Inserts for Internal Threading Holders CNC Cutting CNC Turning Tool

  • High Efficiency: This turning tool holders kit for semi-finishing and finishing operations, can reduce the tool grinding cost and improve the cutting efficiency..
  • High Performance: Made of carbide and the coating material is TIN, it can be used for processing steel, the inserts has high hardness, low friction coefficient, good wear resistance and strong impact resistance..
  • Threading Boring Bars: The material of the boring bar is 40Cr steel, widely use, tightly impacted bolt, simple structure, often used for small hole machining..
  • Package Includes: 1PC SNR0008K11 + 1PC SNR0010K11 + 1PC SNR0012M11 turning tools + 3PCS 11IR A60 turning inserts + 3PCS T8 wrench..
  • Best Service: The carbide inserts and turning tools holder are packed in plastic containers, which is safe and easy to store. Any more question about this item, please feel free to email us..
Check Stock

Indexable Carbide Arc Grooving Inserts MRMN300 (R1.5mm) Multilayer Coated CNC Carbide Turning Inserts Lathe Inserts Cutters for MGEHR/MGIVR Lathe Grooving Cut-Off Tool,Processing Stainless Steel,10pcs

  • It Is Processed By Imported Technology And Has The Advantages Of High Hardness, Strong Wear Resistance, High Smoothness, Not Easy To Stick To The Knife, And Smooth Chip Removal..
  • Different R Angles Can Meet Your Needs For Fine Turning Or Rough Turning, Reduce Cutting Resistance, And Achieve Sharp Cutting..
  • The Turning Is Light And Fast, And The Advanced Coating Process Is Sprayed By The 1000-Degree Stress Accumulation Method, The Coating Is Thicker, And The Cutting Edge Is Passivated, Strong And Durable..
  • The Unique Groove Design Can Make Chip Removal Faster And Smoother, So As To Ensure That The Excrement Will Not Scratch The Surface Of The Product!.
  • The Blade Is Both Sharp And Thick, So That It Can Realize The Ideal Processing That Is Fast And Not Easy To Stick To The Knife, High Smoothness And Not Easy To Break..
Check Stock

OPL5 Motorcycle Highway Bar Lights Switchback Driving Crash Bar Lights Motorcycle Driving Lights Led Turn Signal Lights for Harley Davidson 1-1/4 inch Crash Bar Touring Driving Lights Bikes Silver

  • LED driving lights/turn singal work lights on the crash bars fits for motorcycles and others with 1-1/4 inch (1.25 inch) Bars..
  • The LED Crash bar lights are dual colors for the switchback function.It can be used as daytime running light(DRL for White Light)and LED turning....
  • These bar lights can be mounted vertically or horizontally position to need your application. Such as added these auxiliary lights on motorcycle....
  • Perfect Waterproof Performance: They can work well in a variety of weather conditions.Switchback function turns off the white driving lights when the....
  • Easy Installation: The black wire connects negative electrode.
  • Red wire connects the DRL and the blue wire connects the LED turning signal....
Check Stock