Categories

Best Grooved Single Screw Extruders

TENLOG TL-D3 Pro Independent Dual Extruder 3D Printer 300 Degree High Temperature Nozzle,Silent Mainboards TMC2209 Drive,600W Power Supply,Support PVA TPU ABS PLA Nylon,11.8 x11.8 x13.8

  • INDEPENDENT DUAL EXTRUDERS: 3D printer is ideal for efficient and sturdy prints.
  • THREE MODES: Dual material, duplicate mode, and mirror mode to allow you to use extruders in tandem or independently for more efficient printing.
  • NEAR-SILENT PRINTING: A mute motherboard and direct drive extruders are designed to print near-silently for non-distracting design work.
  • EASY TO ASSEMBLE: 3D printer can be assembled in less than 5 minutes.
  • BOROSILICATE GLASS BED: Distributes heat evenly for less warping and smooth printing.
  • prints can be extracted from the bed by hand following cool down.
Check Stock

TENLOG TL-D3 Pro Independent Dual Extruder 3D Printer 300 Degree High Temperature Nozzle,Silent Mainboards TMC2208 Drive,600W Power Supply,Support PVA TPU ABS PLA,Direct Feed,11.8 x11.8 x13.8

  • INDEPENDENT DUAL EXTRUDERS: 3D printer is ideal for efficient and sturdy prints.
  • THREE MODES: Dual material, duplicate mode, and mirror mode to allow you to use extruders in tandem or independently for more efficient printing.
  • NEAR-SILENT PRINTING: A mute motherboard and direct drive extruders are designed to print near-silently for non-distracting design work.
  • EASY TO ASSEMBLE: 3D printer can be assembled in less than 5 minutes.
  • BOROSILICATE GLASS BED: Distributes heat evenly for less warping and smooth printing.
  • prints can be extracted from the bed by hand following cool down.
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ...met black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ...met black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

MK10 3D Printer Extruders Kit 5 Pcs Aluminum Heater Block + 1.75mm Extruder Throat Tube M7 Thread + Cotton Heater Tape for 3D Printer Wanhao Filament

  • ✹✹ High quality copper and stainless steel, ensure concentricity and roundness.
  • Designed for many common types of 3D printers, solid aluminium construction with aperture..
  • ✹✹ Aluminium Heater Block for Extruders in 3D-Printers. A drilling with an M4 screw is scheduled for the optimal fixing of the Cartridge Heater. The Thermistor is fixed by means of a M4 grub screw in order to avoid slipping or loosening. The heating block is equipped with an M7 thread for the Nozzle..
  • ✹✹ Compatibility: Fit with MK10 hotend aluminum cooling block, such as DIY MK10 3D printer, FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc..
  • ✹✹ 2mm thick cotton heater tape for heat preservation, keep heater block and consumable work better..
  • ✹✹ Any questions, you can tell us and we will give you a satisfied solution!.
Check Stock

VILLFUL 1 set Mounted Bypass Pocket Groove Wall Mount Simple Floor Doors Barn Accessories Track Screws with and Sliding Black Hardware Including No Adjustable for Guide Plastic Guides

  • SLIDING DOOR FLOOR GUIDE-- ? made of quality POM material, and stable, not easy to or damage..
  • BARN DOOR FLOOR GUIDE-- Can work on both single or double doors, most closet, bypass and barn style doors. Perfectly work with all kinds of rolling door kits, features and reliable performance..
  • SLIDING DOOR BOTTOM GUIDE-- These floor guides are fit for grooved and non-grooved doors of all thicknesses..
  • BYPASS DOOR FLOOR GUIDE-- ? The installation method is simple and will not take you too much time..
  • CLOSET DOOR FLOOR GUIDES-- ? Our door guide is suitable for both grooved and non- grooved sliding doors..
Check Stock

Monoprice - 112504 Premium 3D Printer Filament 1.75MM 0.1kg/spool - Cleaning Filament - Compatible With Almost All 3D Printers And 3D Pens

  • Keep the nozzles and extruders on your 3D printer printing like new using this 1.75mm Cleaning Filament from Monoprice!.
  • It is a good idea to periodically clean the nozzles and extruders on your 3D printer to ensure that they feed filament smoothly and evenly..
  • It is also good to clean when switching filament colors or material types..
  • This cleaning filament is designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament.
  • To clean using this filament, simply print about 12" of material. It prints at a wide 160 ~ 260C temperature range.
Check Stock

Nature Smile Luxury Wooden Suit Hangers 6 Pack Wood Coat Hangers Jacket Outerwear Shirt Hangers,with Extra-Wide Shoulder 360 Degree Swivel Hooks & Anti-Slip Bar with Screw Retro Color

  • Solid Wood Constructions – Set of 6 coat hangers are well crafted of premium quality solid Lotus wood. The smooth natural finish provides a captivating look to your closet. Single suit hanger size is 17.5 X 9.5 X 2.3 inch..
  • Extra Wide Shoulder Design – The wide shoulder design of the coat hangers provides ample support to your suits, coats and other kinds of clothes, distribute garment weight evenly and preserves collars and drape to ensure suits and coats maintain their tailor-made shape..
  • 360 Degree Swivel Hook - The hook of wood coat hangers is chrome-plated and A 360 degrees retotating design enabling users to easily turn the hanger sideways to check out garments without even removing them from the clothing rack. More durable to hang heavy clothes..
  • Non Slip Bar with Screw – The bar has been fixed with a screw that make it sticked with the hanger firmly. And the bar is fitted with a grooved non-slip rubber tube that prevent trousers and skirts from slipping off and creasing or wrinkling..
  • Solid Box – We use solid box to pack these coat hangers to ensure they are well protected during shipping. All products are guarranteed. Shorter design 16.1''L for women is also available.
Check Stock

Nature Smile Luxury Mahogany Wooden Suit Hangers - 6 Pack - Wood Coat Hangers,Jacket Outerwear Shirt Hangers,Glossy Finish with Extra-Wide Shoulder 360 Degree Swivel Hooks & Anti-Slip Bar with Screw

  • Solid Wood Constructions – Set of 6 coat hangers are well crafted of premium quality solid Lotus wood. The smooth natural finish provides a captivating look to your closet. Single suit hanger size is 17.5 X 9.5 X 2.3 inch..
  • Extra Wide Shoulder Design – The wide shoulder design of the coat hangers provides ample support to your suits, coats and other kinds of clothes, distribute garment weight evenly and preserves collars and drape to ensure suits and coats maintain their tailor-made shape..
  • 360 Degree Swivel Hook - The hook of wood coat hangers is chrome-plated and A 360 degrees retotating design enabling users to easily turn the hanger sideways to check out garments without even removing them from the clothing rack. More durable to hang heavy clothes..
  • Non Slip Bar with Screw – The bar has been fixed with a screw that make it sticked with the hanger firmly. And the bar is fitted with a grooved non-slip rubber tube that prevent trousers and skirts from slipping off and creasing or wrinkling..
  • Solid Box – We use solid box to pack these coat hangers to ensure they are well protected during shipping. All products are guarranteed. Shorter design 16.1''L for women is also available.
Check Stock

Nature Smile Luxury Natural Wooden Suit Hangers - 6 Pack - Wood Coat Hangers,Jacket Outerwear Shirt Hangers,Glossy Finish with Extra-Wide Shoulder 360 Degree Swivel Hooks & Anti-Slip Bar with Screw

  • Solid Wood Constructions – Set of 6 coat hangers are well crafted of premium quality solid Lotus wood. The smooth natural finish provides a captivating look to your closet. Single suit hanger size is 17.5 X 9.5 X 2.3 inch..
  • Extra Wide Shoulder Design – The wide shoulder design of the coat hangers provides ample support to your suits, coats and other kinds of clothes, distribute garment weight evenly and preserves collars and drape to ensure suits and coats maintain their tailor-made shape..
  • 360 Degree Swivel Hook - The hook of wood coat hangers is chrome-plated and A 360 degrees retotating design enabling users to easily turn the hanger sideways to check out garments without even removing them from the clothing rack. More durable to hang heavy clothes..
  • Non Slip Bar with Screw – The bar has been fixed with a screw that make it sticked with the hanger firmly. And the bar is fitted with a grooved non-slip rubber tube that prevent trousers and skirts from slipping off and creasing or wrinkling..
  • Solid Box – We use solid box to pack these coat hangers to ensure they are well protected during shipping. All products are guarranteed. Shorter design 16.1''L for women is also available.
Check Stock

PannySewCraft Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More!

  • ►High Quality Premium Sewing Feet From TFBOY.
  • ►Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
  • ►Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm,Compatible With Brother,Janome,Singer....
  • ► Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
  • ► Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
Check Stock

VANICE Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More

  • Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
  • Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm,Compatible With Brother,Janome,Singer....
  • Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
  • High Quality Premium Sewing Feet From VANICE.
  • Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
Check Stock

Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More

  • Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm..
  • Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
  • Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
  • Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
  • Fits All Low Shank Snap-On Singer* (Some Singers Require Low Shank Adapter), Babylock, Euro-Pro, Kenmore, White, Juki, New Home, Simplicity, Necchi and Elna Sewing Machines.
Check Stock